lkml.org 
[lkml]   [2015]   [Jan]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/5] Add support for Fujitsu USB host controller
Date
These patches add support for XHCI compliant Host controller found
on Fujitsu Socs, and are based on http://lwn.net/Articles/629162/
The first patch is to add Fujitsu glue layer of Synopsis DesignWare USB3 driver
and last four patch is about quirk implementation of errata in Synopsis
DesignWare USB3 IP.

Patch 1 introduces Fujitsu Specific Glue layer in Synopsis DesignWare USB3 IP
driver.

Patch 2 is to add a revison number 3.00a of Synopsis DesignWare USB3 IP
core driver.

Patch 3 introduces using a quirk based on a errata of Synopsis
DesignWare USB3 IP which is versions < 3.00a and has hardware configuration
DWC_USB3_SUSPEND_ON_DISCONNECT_EN=1, which cannot be read from software. As a
result this quirk has to be enabled via platform data or device tree.

Patch 4 is to set Synopsis quirk in xhci platform driver based on xhci platform
data.

Patch 5 introduces a quirk with device disconnection management necessary
Synopsys Designware USB3 IP with versions < 3.00a and hardware configuration
DWC_USB3_SUSPEND_ON_DISCONNECT_EN=1. It solves a problem where without the
quirk, that host controller will die after a usb device is disconnected from
port of root hub.

Successfully tested on Fujitsu mb86s7x board.

Changes since v1 (RFC):
[https://lkml.org/lkml/2014/12/15/929]
- based on Arnd's comment, remove entire unnecessary Fujitsu EHCI/OHCI glue,
- based on Felipe's comment, fix mis-using of runtime-pm API and setting dma
mask, remove unnecessary comment, and refactor suspend/resume handler in
Fujitsu Specific Glue layer in dwc3,
- based on Felipe's comment, add more commit log and comments in Synopsis
quirk implementation, and separate it into four patches.

Sneeker Yeh (5):
usb: dwc3: add Fujitsu Specific Glue layer
usb: dwc3: add revision number DWC3_REVISION_300A
usb: dwc3: Add quirk for Synopsis device disconnection errata
xhci: Platform: Set Synopsis device disconnection quirk based on
platform data
xhci: add a quirk for device disconnection errata for Synopsis
Designware USB3 core

Documentation/devicetree/bindings/usb/dwc3.txt | 17 ++
.../devicetree/bindings/usb/fujitsu-dwc3.txt | 33 ++++
drivers/usb/dwc3/Kconfig | 11 ++
drivers/usb/dwc3/Makefile | 1 +
drivers/usb/dwc3/core.c | 6 +
drivers/usb/dwc3/core.h | 2 +
drivers/usb/dwc3/dwc3-mb86s70.c | 206 ++++++++++++++++++++
drivers/usb/dwc3/host.c | 4 +
drivers/usb/dwc3/platform_data.h | 1 +
drivers/usb/host/xhci-hub.c | 4 +
drivers/usb/host/xhci-plat.c | 3 +
drivers/usb/host/xhci.c | 29 +++
drivers/usb/host/xhci.h | 24 +++
include/linux/usb/xhci_pdriver.h | 4 +
14 files changed, 345 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/fujitsu-dwc3.txt
create mode 100644 drivers/usb/dwc3/dwc3-mb86s70.c

--
1.7.9.5



\
 
 \ /
  Last update: 2015-01-19 09:01    [W:0.144 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site