lkml.org 
[lkml]   [2015]   [Jan]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/5] usb: extcon: Fix USB-Host cable name
Date
The recommended name for USB-Host cable state is "USB-Host" and not
"USB-HOST" as per drivers/extcon/extcon-class.c extcon_cable_name.

Change all instances of "USB-HOST" to "USB-Host".

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
drivers/extcon/extcon-palmas.c | 18 +++++++++---------
drivers/usb/dwc3/dwc3-omap.c | 6 +++---
drivers/usb/phy/phy-omap-otg.c | 4 ++--
drivers/usb/phy/phy-tahvo.c | 8 ++++----
4 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c
index 11c6757..6d002c3 100644
--- a/drivers/extcon/extcon-palmas.c
+++ b/drivers/extcon/extcon-palmas.c
@@ -31,7 +31,7 @@

static const char *palmas_extcon_cable[] = {
[0] = "USB",
- [1] = "USB-HOST",
+ [1] = "USB-Host",
NULL,
};

@@ -93,26 +93,26 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb)
PALMAS_USB_ID_INT_LATCH_CLR,
PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND);
palmas_usb->linkstat = PALMAS_USB_STATE_ID;
- extcon_set_cable_state(palmas_usb->edev, "USB-HOST", true);
- dev_info(palmas_usb->dev, "USB-HOST cable is attached\n");
+ extcon_set_cable_state(palmas_usb->edev, "USB-Host", true);
+ dev_info(palmas_usb->dev, "USB-Host cable is attached\n");
} else if ((set & PALMAS_USB_ID_INT_SRC_ID_FLOAT) &&
(id_src & PALMAS_USB_ID_INT_SRC_ID_FLOAT)) {
palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
PALMAS_USB_ID_INT_LATCH_CLR,
PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT);
palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
- extcon_set_cable_state(palmas_usb->edev, "USB-HOST", false);
- dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
+ extcon_set_cable_state(palmas_usb->edev, "USB-Host", false);
+ dev_info(palmas_usb->dev, "USB-Host cable is detached\n");
} else if ((palmas_usb->linkstat == PALMAS_USB_STATE_ID) &&
(!(set & PALMAS_USB_ID_INT_SRC_ID_GND))) {
palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
- extcon_set_cable_state(palmas_usb->edev, "USB-HOST", false);
- dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
+ extcon_set_cable_state(palmas_usb->edev, "USB-Host", false);
+ dev_info(palmas_usb->dev, "USB-Host cable is detached\n");
} else if ((palmas_usb->linkstat == PALMAS_USB_STATE_DISCONNECT) &&
(id_src & PALMAS_USB_ID_INT_SRC_ID_GND)) {
palmas_usb->linkstat = PALMAS_USB_STATE_ID;
- extcon_set_cable_state(palmas_usb->edev, "USB-HOST", true);
- dev_info(palmas_usb->dev, " USB-HOST cable is attached\n");
+ extcon_set_cable_state(palmas_usb->edev, "USB-Host", true);
+ dev_info(palmas_usb->dev, " USB-Host cable is attached\n");
}

return IRQ_HANDLED;
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 172d64e..6713ad9 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -445,14 +445,14 @@ static int dwc3_omap_extcon_register(struct dwc3_omap *omap)

omap->id_nb.notifier_call = dwc3_omap_id_notifier;
ret = extcon_register_interest(&omap->extcon_id_dev,
- edev->name, "USB-HOST",
+ edev->name, "USB-Host",
&omap->id_nb);
if (ret < 0)
- dev_vdbg(omap->dev, "failed to register notifier for USB-HOST\n");
+ dev_vdbg(omap->dev, "failed to register notifier for USB-Host\n");

if (extcon_get_cable_state(edev, "USB") == true)
dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_VALID);
- if (extcon_get_cable_state(edev, "USB-HOST") == true)
+ if (extcon_get_cable_state(edev, "USB-Host") == true)
dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_GROUND);
}

diff --git a/drivers/usb/phy/phy-omap-otg.c b/drivers/usb/phy/phy-omap-otg.c
index 56ee760..53cba3f 100644
--- a/drivers/usb/phy/phy-omap-otg.c
+++ b/drivers/usb/phy/phy-omap-otg.c
@@ -119,7 +119,7 @@ static int omap_otg_probe(struct platform_device *pdev)
otg_dev->vbus_nb.notifier_call = omap_otg_vbus_notifier;

ret = extcon_register_interest(&otg_dev->id_dev, config->extcon,
- "USB-HOST", &otg_dev->id_nb);
+ "USB-Host", &otg_dev->id_nb);
if (ret)
return ret;

@@ -130,7 +130,7 @@ static int omap_otg_probe(struct platform_device *pdev)
return ret;
}

- otg_dev->id = extcon_get_cable_state(extcon, "USB-HOST");
+ otg_dev->id = extcon_get_cable_state(extcon, "USB-Host");
otg_dev->vbus = extcon_get_cable_state(extcon, "USB");
omap_otg_set_mode(otg_dev);

diff --git a/drivers/usb/phy/phy-tahvo.c b/drivers/usb/phy/phy-tahvo.c
index 845f658..56d3704 100644
--- a/drivers/usb/phy/phy-tahvo.c
+++ b/drivers/usb/phy/phy-tahvo.c
@@ -61,7 +61,7 @@ struct tahvo_usb {
};

static const char *tahvo_cable[] = {
- "USB-HOST",
+ "USB-Host",
"USB",
NULL,
};
@@ -129,7 +129,7 @@ static void tahvo_usb_become_host(struct tahvo_usb *tu)
{
struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);

- extcon_set_cable_state(&tu->extcon, "USB-HOST", true);
+ extcon_set_cable_state(&tu->extcon, "USB-Host", true);

/* Power up the transceiver in USB host mode */
retu_write(rdev, TAHVO_REG_USBR, USBR_REGOUT | USBR_NSUSPEND |
@@ -148,7 +148,7 @@ static void tahvo_usb_become_peripheral(struct tahvo_usb *tu)
{
struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);

- extcon_set_cable_state(&tu->extcon, "USB-HOST", false);
+ extcon_set_cable_state(&tu->extcon, "USB-Host", false);

/* Power up transceiver and set it in USB peripheral mode */
retu_write(rdev, TAHVO_REG_USBR, USBR_SLAVE_CONTROL | USBR_REGOUT |
@@ -376,7 +376,7 @@ static int tahvo_usb_probe(struct platform_device *pdev)
}

/* Set the initial cable state. */
- extcon_set_cable_state(&tu->extcon, "USB-HOST",
+ extcon_set_cable_state(&tu->extcon, "USB-Host",
tu->tahvo_mode == TAHVO_MODE_HOST);
extcon_set_cable_state(&tu->extcon, "USB", tu->vbus_state);

--
2.1.0


\
 
 \ /
  Last update: 2015-01-19 19:01    [W:0.222 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site