lkml.org 
[lkml]   [2015]   [Jan]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Bugfix 0/3] Fix regressions in Xen IRQ management

Monday, January 19, 2015, 5:55:41 AM, you wrote:

> Hi all,
> Sander reports an Xen pci-passthrough regression caused by
> commit cffe0a2b5a34c95a4dadc9ec7132690a5b0f6687 ("x86, irq: Keep
> balance of IOAPIC pin reference count"). This patch set tries to
> fix it.

> Patch 1 is a fix for another issue found during fixing the regression.
> Patch 2 is a hotfix for the regression and should be targeted for v3.19.
> Patch 3 is the foundamental fix for the regression and should be targeted
> at v3.20.

> Hi Sander,
> Could you please help to test by:
> 1) only apply patch 1 and patch 2
> 2) and then apply patch 3 ontop of patch 1/2.
> Thanks!
> Gerry

Hi Gerry / David / Konrad,

My test results:

- On intel:
- With apic v4 series and only patch 1 + 2 of this series:
- powerbutton is still working as expected due to apic v4 series
- irq's are delivered to the passed through wifi device,
the wifi device is working now, so that's good !
- However now i get this splat in dom0,
(haven't seen this one before,
but unfortunately i don't seem to be able to trigger it reliably (only hit this once in 10 boots),
and i also don't know for sure if it's even due to this patch set or not):
[ 2361.607881] irq 18: nobody cared (try booting with the "irqpoll" option)
[ 2361.650103] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.19.0-rc5-creanuc-20150119-doflr-apicv4-apicpcipt12+ #1
[ 2361.670344] Hardware name: /D53427RKE, BIOS RKPPT10H.86A.0017.2013.0425.1251 04/25/2013
[ 2361.690787] 0000000000000000 ffff8800596aee8c ffffffff818af9e7 ffff8800596aee00
[ 2361.711547] ffffffff8108151c ffff8800596aee00 0000000000000000 0000000000000000
[ 2361.732474] ffffffff81081929 0000000000000000 0000000000000000 0000000000000012
[ 2361.753265] Call Trace:
[ 2361.773907] <IRQ> [<ffffffff818af9e7>] ? dump_stack+0x40/0x50
[ 2361.795077] [<ffffffff8108151c>] ? __report_bad_irq+0x1e/0xbb
[ 2361.815844] [<ffffffff81081929>] ? note_interrupt+0x1a9/0x234
[ 2361.835965] [<ffffffff8107fa8f>] ? handle_irq_event_percpu+0xd7/0xf1
[ 2361.856384] [<ffffffff8107fae0>] ? handle_irq_event+0x37/0x57
[ 2361.876775] [<ffffffff81082212>] ? handle_fasteoi_irq+0x74/0xcb
[ 2361.896812] [<ffffffff8107f47a>] ? generic_handle_irq+0x15/0x20
[ 2361.916476] [<ffffffff813bf5e7>] ? evtchn_fifo_handle_events+0x138/0x16f
[ 2361.936105] [<ffffffff813bd3a5>] ? __xen_evtchn_do_upcall+0x39/0x69
[ 2361.955986] [<ffffffff813be71d>] ? xen_evtchn_do_upcall+0x27/0x36
[ 2361.975998] [<ffffffff818b881e>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 2361.996017] <EOI> [<ffffffff810013aa>] ? xen_hypercall_sched_op+0xa/0x20
[ 2362.016394] [<ffffffff810013aa>] ? xen_hypercall_sched_op+0xa/0x20
[ 2362.036886] [<ffffffff81007138>] ? xen_safe_halt+0xc/0x13
[ 2362.057118] [<ffffffff81013add>] ? default_idle+0x5/0x8
[ 2362.077309] [<ffffffff81078b52>] ? cpu_startup_entry+0x114/0x25e
[ 2362.097612] [<ffffffff81effe9d>] ? start_kernel+0x422/0x42d
[ 2362.118041] [<ffffffff81eff880>] ? set_init_arg+0x50/0x50
[ 2362.138141] [<ffffffff81f029a0>] ? xen_start_kernel+0x4d3/0x4db
[ 2362.157862] handlers:
[ 2362.177280] [<ffffffff8157567e>] ata_bmdma_interrupt
[ 2362.196805] Disabling IRQ #18
- attached complete proc-interrupts, lspci, dmesg and xl-dmesg attached as proc-interrupts12.txt, lspci12.txt, dmesg12.txt and xl-dmesg12.txt


- With apic v4 series and patch 1 + 2 + 3 of this series:
- powerbutton is still working as expected due to apic v4 series
- irq's are delivered to the passed through wifi device,
the wifi device is working now, so that's good !
- I haven't seen the splat above so far,
(but since i can't trigger it reliably that doesn't give any guarantees unfortunately).

On AMD:
- With apic v4 series and only patch 1 + 2 of this series:
- powerbutton is still working as expected due to apic v4 series
- videostream from passed through device is stable again, so that's good !

- With apic v4 series and patch 1 + 2 + 3 of this series:
- powerbutton is still working as expected due to apic v4 series
- videostream from passed through device is stable again, so that's good !


So to summarize:
The reported problems are fixed, everything looks good.
Apart from a splat which occurs infrequently and from which i don't know
if it is due to this patch set anyway.

So i'm very much inclined to say:
Tested-by: Sander Eikelenboom <linux@eikelenboom.it>


Thanks Gerry !

--
Sander

> Jiang Liu (3):
> xen/irq, ACPI: Fix regression in xen PCI passthrough caused by
> cffe0a2b5a34
> xen/irq: Override ACPI IRQ management callback __acpi_unregister_gsi
> x86/PCI: Refine the way to release PCI IRQ resources

> arch/x86/include/asm/acpi.h | 1 +
> arch/x86/include/asm/pci_x86.h | 2 --
> arch/x86/pci/common.c | 30 ++++++++++++++++++++++++++++--
> arch/x86/pci/intel_mid_pci.c | 4 ++--
> arch/x86/pci/irq.c | 15 +--------------
> arch/x86/pci/xen.c | 2 ++
> drivers/acpi/pci_irq.c | 10 +---------
> 7 files changed, 35 insertions(+), 29 deletions(-)
[ 0.000000] PAT configuration [0-7]: WB WT UC- UC WC WP UC UC
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.0-rc5-creanuc-20150119-doflr-apicv4-apicpcipt12+ (root@creanuc) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Mon Jan 19 10:09:04 CET 2015
[ 0.000000] Command line: root=/dev/mapper/creanuc-creanuc_dom0 ro mem=1536M vga=791 nomodeset xen-pciback.hide=(02:00.0)(00:19.0)
[ 0.000000] Released 0 page(s)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009cfff] usable
[ 0.000000] Xen: [mem 0x000000000009d800-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] Xen: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] Xen: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] Xen: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] Xen: [mem 0x0000000040005000-0x0000000060263fff] usable
[ 0.000000] Xen: [mem 0x0000000060264000-0x00000000db9effff] unusable
[ 0.000000] Xen: [mem 0x00000000db9f0000-0x00000000dbe6efff] reserved
[ 0.000000] Xen: [mem 0x00000000dbe6f000-0x00000000dbe7efff] ACPI data
[ 0.000000] Xen: [mem 0x00000000dbe7f000-0x00000000dbf9cfff] ACPI NVS
[ 0.000000] Xen: [mem 0x00000000dbf9d000-0x00000000dc20cfff] reserved
[ 0.000000] Xen: [mem 0x00000000dc20d000-0x00000000dc20dfff] unusable
[ 0.000000] Xen: [mem 0x00000000dc20e000-0x00000000dc250fff] ACPI NVS
[ 0.000000] Xen: [mem 0x00000000dc251000-0x00000000dcffffff] unusable
[ 0.000000] Xen: [mem 0x00000000dd000000-0x00000000df9fffff] reserved
[ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] Xen: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] Xen: [mem 0x0000000100000000-0x000000021e5fffff] unusable
[ 0.000000] e820: remove [mem 0x60000000-0xfffffffffffffffe] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: user-defined physical RAM map:
[ 0.000000] user: [mem 0x0000000000000000-0x000000000009cfff] usable
[ 0.000000] user: [mem 0x000000000009d800-0x00000000000fffff] reserved
[ 0.000000] user: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] user: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] user: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] user: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] user: [mem 0x0000000040005000-0x000000005fffffff] usable
[ 0.000000] user: [mem 0x0000000060264000-0x00000000db9effff] unusable
[ 0.000000] user: [mem 0x00000000db9f0000-0x00000000dbe6efff] reserved
[ 0.000000] user: [mem 0x00000000dbe6f000-0x00000000dbe7efff] ACPI data
[ 0.000000] user: [mem 0x00000000dbe7f000-0x00000000dbf9cfff] ACPI NVS
[ 0.000000] user: [mem 0x00000000dbf9d000-0x00000000dc20cfff] reserved
[ 0.000000] user: [mem 0x00000000dc20d000-0x00000000dc20dfff] unusable
[ 0.000000] user: [mem 0x00000000dc20e000-0x00000000dc250fff] ACPI NVS
[ 0.000000] user: [mem 0x00000000dc251000-0x00000000dcffffff] unusable
[ 0.000000] user: [mem 0x00000000dd000000-0x00000000df9fffff] reserved
[ 0.000000] user: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] user: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] user: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] user: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] user: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] user: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] user: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] user: [mem 0x0000000100000000-0x000000021e5fffff] unusable
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: /D53427RKE, BIOS RKPPT10H.86A.0017.2013.0425.1251 04/25/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x60000 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x5fe00000-0x5fffffff]
[ 0.000000] [mem 0x5fe00000-0x5fffffff] page 4k
[ 0.000000] BRK [0x02097000, 0x02097fff] PGTABLE
[ 0.000000] BRK [0x02098000, 0x02098fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40000000-0x40003fff]
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x02099000, 0x02099fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0x5fdfffff]
[ 0.000000] [mem 0x40005000-0x5fdfffff] page 4k
[ 0.000000] BRK [0x0209a000, 0x0209afff] PGTABLE
[ 0.000000] BRK [0x0209b000, 0x0209bfff] PGTABLE
[ 0.000000] BRK [0x0209c000, 0x0209cfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x1fffffff] page 4k
[ 0.000000] RAMDISK: [mem 0x04000000-0x04fc0fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 Intel )
[ 0.000000] ACPI: XSDT 0x00000000DBE73080 00007C (v01 Intel D53427RK 00000011 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DBE7D100 00010C (v05 Intel D53427RK 00000011 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DBE73188 009F72 (v02 Intel D53427RK 00000011 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000DBF9B080 000040
[ 0.000000] ACPI: APIC 0x00000000DBE7D210 000072 (v03 Intel D53427RK 00000011 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DBE7D288 000044 (v01 Intel D53427RK 00000011 AMI 00010013)
[ 0.000000] ACPI: TCPA 0x00000000DBE7D2D0 000032 (v02 APTIO4 NAPAASF 00000011 MSFT 01000013)
[ 0.000000] ACPI: MCFG 0x00000000DBE7D308 00003C (v01 Intel D53427RK 00000011 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DBE7D348 000038 (v01 Intel D53427RK 00000011 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DBE7D380 000315 (v01 SataRe SataTabl 00000011 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000DBE7D698 0009AA (v01 PmRef Cpu0Ist 00000011 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000DBE7E048 000B22 (v01 PmRef CpuPm 00000011 INTL 20051117)
[ 0.000000] ACPI: XMAR 0x00000000DBE7EB70 0000B8 (v01 INTEL SNB 00000011 INTL 00000001)
[ 0.000000] ACPI: ASF! 0x00000000DBE7EC28 0000A5 (v32 INTEL HCG 00000011 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0x5fffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0x5fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x5fffffff]
[ 0.000000] On node 0 totalpages: 392603
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6080 pages used for memmap
[ 0.000000] DMA32 zone: 388607 pages, LIFO batch:31
[ 0.000000] p2m virtual area at ffffc90000000000, size is 400000
[ 0.000000] Remapped 612 page(s)
[ 0.000000] Reserving Intel graphics stolen memory at 0xdda00000-0xdf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.6.0-unstable (preserve-AD)
[ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88005f600000 s80128 r8192 d30464 u524288
[ 0.000000] pcpu-alloc: s80128 r8192 d30464 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] xen: PV spinlocks enabled
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 386438
[ 0.000000] Kernel command line: root=/dev/mapper/creanuc-creanuc_dom0 ro mem=1536M vga=791 nomodeset xen-pciback.hide=(02:00.0)(00:19.0)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] software IO TLB [mem 0x59a00000-0x5da00000] (64MB) mapped at [ffff880059a00000-ffff88005d9fffff]
[ 0.000000] Memory: 1436748K/1570412K available (8934K kernel code, 935K rwdata, 3196K rodata, 1016K init, 644K bss, 133664K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:4352 nr_irqs:456 16
[ 0.000000] xen:events: Using FIFO-based ABI
[ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1)
[ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2)
[ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3)
[ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4)
[ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5)
[ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6)
[ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7)
[ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8)
[ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9)
[ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10)
[ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11)
[ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12)
[ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13)
[ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14)
[ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15)
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] tsc: Detected 2294.840 MHz processor
[ 8.447520] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.68 BogoMIPS (lpj=9179360)
[ 8.447527] pid_max: default: 32768 minimum: 301
[ 8.447537] ACPI: Core revision 20141107
[ 8.484285] ACPI: All ACPI Tables successfully acquired
[ 8.485953] Security Framework initialized
[ 8.485977] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 8.485982] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 8.486305] Initializing cgroup subsys devices
[ 8.486311] Initializing cgroup subsys freezer
[ 8.486316] Initializing cgroup subsys net_cls
[ 8.486322] Initializing cgroup subsys blkio
[ 8.486326] Initializing cgroup subsys perf_event
[ 8.486413] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 8.486413] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 8.486421] CPU: Physical Processor ID: 0
[ 8.486424] CPU: Processor Core ID: 0
[ 8.486946] mce: CPU supports 2 MCE banks
[ 8.486969] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 8.486969] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 8.487173] Freeing SMP alternatives memory: 48K (ffffffff81fe9000 - ffffffff81ff5000)
[ 8.489421] cpu 0 spinlock event irq 25
[ 8.489469] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
[ 8.489710] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 8.489789] installing Xen timer for CPU 1
[ 8.489802] cpu 1 spinlock event irq 32
[ 8.490713] installing Xen timer for CPU 2
[ 8.490731] cpu 2 spinlock event irq 39
[ 8.491833] installing Xen timer for CPU 3
[ 8.491846] cpu 3 spinlock event irq 46
[ 8.492667] x86: Booted up 1 node, 4 CPUs
[ 8.493057] devtmpfs: initialized
[ 8.494004] xor: automatically using best checksumming function:
[ 8.531767] avx : 12074.000 MB/sec
[ 8.531963] NET: Registered protocol family 16
[ 8.531980] xen:grant_table: Grant tables using version 1 layout
[ 8.531994] Grant table initialized
[ 8.532786] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 8.532794] ACPI: bus type PCI registered
[ 8.532797] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 8.532918] dca service started, version 1.12.1
[ 8.532955] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 8.532961] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 8.543865] PCI: Using configuration type 1 for base access
[ 8.624102] raid6: sse2x1 4567 MB/s
[ 8.692191] raid6: sse2x2 5707 MB/s
[ 8.760285] raid6: sse2x4 6498 MB/s
[ 8.760289] raid6: using algorithm sse2x4 (6498 MB/s)
[ 8.760293] raid6: using ssse3x2 recovery algorithm
[ 8.760367] ACPI: Added _OSI(Module Device)
[ 8.760373] ACPI: Added _OSI(Processor Device)
[ 8.760377] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 8.760381] ACPI: Added _OSI(Processor Aggregator Device)
[ 8.762500] xen: registering gsi 9 triggering 0 polarity 0
[ 8.764867] ACPI: Executed 1 blocks of module-level executable AML code
[ 8.771502] ACPI: Dynamic OEM Table Load:
[ 8.771514] ACPI: SSDT 0xFFFF8800596F8000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 8.772648] ACPI: Dynamic OEM Table Load:
[ 8.772657] ACPI: SSDT 0xFFFF8800596D5000 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 8.773505] ACPI: Dynamic OEM Table Load:
[ 8.773512] ACPI: SSDT 0xFFFF8800596ADC00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 8.775229] ACPI: Interpreter enabled
[ 8.775241] ACPI: (supports S0 S5)
[ 8.775244] ACPI: Using IOAPIC for interrupt routing
[ 8.775292] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 8.786170] ACPI: Power Resource [FN00] (off)
[ 8.786301] ACPI: Power Resource [FN01] (off)
[ 8.786428] ACPI: Power Resource [FN02] (off)
[ 8.786553] ACPI: Power Resource [FN03] (off)
[ 8.786678] ACPI: Power Resource [FN04] (off)
[ 8.787856] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 8.787868] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 8.788460] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 8.788827] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 8.790371] PCI host bridge to bus 0000:00
[ 8.790378] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 8.790383] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 8.790387] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 8.790391] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 8.790396] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 8.790400] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 8.790404] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 8.790408] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 8.790412] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 8.790416] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 8.790420] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 8.790444] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 8.790706] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 8.790752] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 8.790776] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 8.790792] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 8.791087] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 8.791140] pci 0000:00:14.0: reg 0x10: [mem 0xf7d20000-0xf7d2ffff 64bit]
[ 8.791323] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 8.791407] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 8.791495] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 8.791550] pci 0000:00:16.0: reg 0x10: [mem 0xf7d3c000-0xf7d3c00f 64bit]
[ 8.791736] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 8.791893] pci 0000:00:16.2: [8086:1e3c] type 00 class 0x010185
[ 8.791937] pci 0000:00:16.2: reg 0x10: [io 0xf130-0xf137]
[ 8.791958] pci 0000:00:16.2: reg 0x14: [io 0xf120-0xf123]
[ 8.791979] pci 0000:00:16.2: reg 0x18: [io 0xf110-0xf117]
[ 8.792001] pci 0000:00:16.2: reg 0x1c: [io 0xf100-0xf103]
[ 8.792022] pci 0000:00:16.2: reg 0x20: [io 0xf0f0-0xf0ff]
[ 8.792299] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
[ 8.792357] pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7]
[ 8.792379] pci 0000:00:16.3: reg 0x14: [mem 0xf7d3a000-0xf7d3afff]
[ 8.792726] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 8.792772] pci 0000:00:19.0: reg 0x10: [mem 0xf7d00000-0xf7d1ffff]
[ 8.792792] pci 0000:00:19.0: reg 0x14: [mem 0xf7d39000-0xf7d39fff]
[ 8.792812] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 8.792984] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 8.793072] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 8.793162] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 8.793212] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d38000-0xf7d383ff]
[ 8.793435] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 8.793554] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 8.793658] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 8.793699] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d30000-0xf7d33fff 64bit]
[ 8.793895] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 8.793987] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 8.794071] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 8.794278] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 8.794337] pci 0000:00:1c.0: Enabling MPC IRBNCE
[ 8.794344] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 8.794409] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 8.794493] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 8.794700] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 8.794754] pci 0000:00:1c.2: Enabling MPC IRBNCE
[ 8.794761] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
[ 8.794825] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 8.794928] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 8.794978] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d37000-0xf7d373ff]
[ 8.795202] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 8.795320] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 8.795406] pci 0000:00:1f.0: [8086:1e56] type 00 class 0x060100
[ 8.795792] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 8.795842] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 8.795862] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 8.795882] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 8.795902] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 8.795922] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 8.795942] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d36000-0xf7d367ff]
[ 8.796076] pci 0000:00:1f.2: PME# supported from D3hot
[ 8.796231] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 8.796269] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d35000-0xf7d350ff 64bit]
[ 8.796324] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 8.796650] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 8.796845] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[ 8.796900] pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
[ 8.797192] pci 0000:02:00.0: supports D1
[ 8.797195] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 8.797259] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 8.804506] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 8.804525] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 8.804578] pci_bus 0000:00: on NUMA node 0
[ 8.804581] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 8.805057] xen: registering gsi 13 triggering 1 polarity 0
[ 8.805411] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 8.805533] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 8.805652] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 8.805790] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 8.805908] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
[ 8.806024] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 8.806144] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 8.806264] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 8.806643] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 8.806703] xen:balloon: Initialising balloon driver
[ 8.806935] xen_balloon: Initialising balloon driver
[ 8.807134] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 8.807142] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 8.807149] vgaarb: loaded
[ 8.807152] vgaarb: bridge control possible 0000:00:02.0
[ 8.807251] SCSI subsystem initialized
[ 8.807409] libata version 3.00 loaded.
[ 8.807450] ACPI: bus type USB registered
[ 8.807479] usbcore: registered new interface driver usbfs
[ 8.807494] usbcore: registered new interface driver hub
[ 8.807528] usbcore: registered new device driver usb
[ 8.807573] pps_core: LinuxPPS API ver. 1 registered
[ 8.807577] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 8.807587] PTP clock support registered
[ 8.807641] wmi: Mapper loaded
[ 8.807683] Advanced Linux Sound Architecture Driver Initialized.
[ 8.807690] PCI: Using ACPI for IRQ routing
[ 8.812482] PCI: pci_cache_line_size set to 64 bytes
[ 8.812583] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 8.812586] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 8.813105] Switched to clocksource xen
[ 8.813200] FS-Cache: Loaded
[ 8.813267] CacheFiles: Loaded
[ 8.813316] pnp: PnP ACPI init
[ 8.813495] system 00:00: [io 0x0680-0x069f] has been reserved
[ 8.813501] system 00:00: [io 0x1000-0x100f] has been reserved
[ 8.813507] system 00:00: [io 0xffff] has been reserved
[ 8.813511] system 00:00: [io 0xffff] has been reserved
[ 8.813515] system 00:00: [io 0x0400-0x0453] could not be reserved
[ 8.813519] system 00:00: [io 0x0458-0x047f] has been reserved
[ 8.813523] system 00:00: [io 0x0500-0x057f] has been reserved
[ 8.813528] system 00:00: [io 0x164e-0x164f] has been reserved
[ 8.813533] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 8.813550] xen: registering gsi 8 triggering 1 polarity 0
[ 8.813589] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 8.813667] system 00:02: [io 0x0454-0x0457] has been reserved
[ 8.813674] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 8.813984] system 00:03: [io 0x0a00-0x0a1f] has been reserved
[ 8.813989] system 00:03: [io 0x0a30-0x0a3f] has been reserved
[ 8.813993] system 00:03: [io 0x0a20-0x0a2f] has been reserved
[ 8.813998] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 8.814124] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 8.814130] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 8.814196] pnp 00:05: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 8.814601] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 8.814606] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 8.814611] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 8.814615] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 8.814620] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[ 8.814624] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 8.814629] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 8.814633] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 8.814638] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 8.814642] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
[ 8.814647] system 00:06: [mem 0xdfa00000-0xdfa00fff] has been reserved
[ 8.814652] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 8.814968] system 00:07: [mem 0x20000000-0x201fffff] has been reserved
[ 8.814973] system 00:07: [mem 0x40004000-0x40004fff] has been reserved
[ 8.814978] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 8.815012] pnp: PnP ACPI: found 8 devices
[ 8.815054] pciback 0000:00:19.0: seizing device
[ 8.815086] pciback 0000:02:00.0: seizing device
[ 8.825927] PM-Timer failed consistency check (0xffffff) - aborting.
[ 8.825977] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 8.826006] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 8.826018] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 8.826039] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 8.826042] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 8.826045] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 8.826047] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 8.826050] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 8.826052] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 8.826055] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 8.826057] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 8.826060] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 8.826062] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
[ 8.826065] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 8.826101] NET: Registered protocol family 2
[ 8.826288] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 8.826348] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 8.826388] TCP: Hash tables configured (established 16384 bind 16384)
[ 8.826410] TCP: reno registered
[ 8.826414] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 8.826424] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 8.826477] NET: Registered protocol family 1
[ 8.826504] pci 0000:00:02.0: Video device with shadowed ROM
[ 8.826636] xen: registering gsi 16 triggering 0 polarity 1
[ 8.826652] xen: --> pirq=16 -> irq=16 (gsi=16)
[ 8.826984] xen: registering gsi 16 triggering 0 polarity 1
[ 8.826987] Already setup the GSI :16
[ 8.885390] xen: registering gsi 23 triggering 0 polarity 1
[ 8.885408] xen: --> pirq=23 -> irq=23 (gsi=23)
[ 8.905441] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 8.905511] Trying to unpack rootfs image as initramfs...
[ 8.919518] Freeing initrd memory: 16132K (ffff880004000000 - ffff880004fc1000)
[ 8.920115] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 8.931378] sha1_ssse3: Using AVX optimized SHA-1 implementation
[ 8.931700] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 8.931737] audit: initializing netlink subsys (disabled)
[ 8.931755] audit: type=2000 audit(1421661406.945:1): initialized
[ 8.931981] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 8.933908] VFS: Disk quotas dquot_6.5.2
[ 8.933955] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 8.934373] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 8.934494] ntfs: driver 2.1.31 [Flags: R/W].
[ 8.934625] fuse init (API version 7.23)
[ 8.941297] alg: No test for stdrng (krng)
[ 8.947640] NET: Registered protocol family 38
[ 8.947674] bounce: pool size: 64 pages
[ 8.947725] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 8.947811] io scheduler noop registered
[ 8.947818] io scheduler deadline registered
[ 8.947862] io scheduler cfq registered (default)
[ 8.948101] xen: registering gsi 16 triggering 0 polarity 1
[ 8.948106] Already setup the GSI :16
[ 8.948319] xen: registering gsi 18 triggering 0 polarity 1
[ 8.948335] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 8.948488] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 8.948512] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 8.948517] cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2
[ 8.948538] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
[ 8.948542] cpcihp_generic: not configured, disabling.
[ 8.948560] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.950646] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
[ 8.950688] vmlfb: initializing
[ 13.949240] uvesafb: Getting VBE info block failed (eax=0x4f00, err=1)
[ 13.949251] uvesafb: vbe_init() failed with -22
[ 13.949265] uvesafb: probe of uvesafb.0 failed with error -22
[ 13.949304] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 13.949308] vesafb: scrolling: redraw
[ 13.949312] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 13.950399] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004500000, using 6144k, total 32704k
[ 14.022352] Console: switching to colour frame buffer device 128x48
[ 14.094872] fb0: VESA VGA frame buffer device
[ 14.095518] vga16fb: initializing
[ 14.095521] vga16fb: mapped to 0xffff8800000a0000
[ 14.096157] checking generic (e0000000 1ff0000) vs hw (a0000 10000)
[ 14.096322] fb1: VGA16 VGA frame buffer device
[ 14.096941] intel_idle: MWAIT substates: 0x21120
[ 14.096943] intel_idle: v0.4 model 0x3A
[ 14.096945] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 14.097001] intel_idle: intel_idle yielding to none
[ 14.097020] ipmi message handler version 39.2
[ 14.097631] ipmi device interface
[ 14.098099] IPMI System Interface driver.
[ 14.098688] ipmi_si: Unable to find any System Interface(s)
[ 14.099441] IPMI Watchdog: driver initialized
[ 14.100038] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[ 14.102182] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 14.103316] ACPI: Power Button [PWRB]
[ 14.103862] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 14.104863] ACPI: Power Button [PWRF]
[ 14.106284] Monitor-Mwait will be used to enter C-1 state
[ 14.106375] Monitor-Mwait will be used to enter C-2 state
[ 14.107394] Warning: Processor Platform Limit not supported.
[ 14.108391] thermal LNXTHERM:00: registered as thermal_zone0
[ 14.109178] ACPI: Thermal Zone [TZ00] (28 C)
[ 14.110245] thermal LNXTHERM:01: registered as thermal_zone1
[ 14.111013] ACPI: Thermal Zone [TZ01] (30 C)
[ 14.111616] Error: Driver 'processor_aggregator' is already registered, aborting...
[ 14.112655] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 14.113953] xen:xen_evtchn: Event-channel device installed
[ 14.115149] xen: registering gsi 18 triggering 0 polarity 1
[ 14.115155] Already setup the GSI :18
[ 14.145614] xen: registering gsi 20 triggering 0 polarity 1
[ 14.145641] xen: --> pirq=20 -> irq=20 (gsi=20)
[ 14.249696] xen_pciback: backend is vpci
[ 14.251211] xen_acpi_processor: Uploading Xen processor PM info
[ 14.284100] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 14.309828] xen: registering gsi 19 triggering 0 polarity 1
[ 14.309840] xen: --> pirq=19 -> irq=19 (gsi=19)
[ 14.330425] 0000:00:16.3: ttyS0 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A
[ 14.350372] hpet_acpi_add: no address or irqs in _CRS
[ 14.369915] Non-volatile memory driver v1.3
[ 14.389419] Linux agpgart interface v0.103
[ 14.408886] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 14.429328] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
[ 14.497434] [drm] Initialized drm 1.1.0 20060810
[ 14.533314] drm/i810 does not support SMP
[ 14.556178] brd: module loaded
[ 14.578190] loop: module loaded
[ 14.598102] nbd: registered device at major 43
[ 14.620465] drbd: initialized. Version: 8.4.5 (api:1/proto:86-101)
[ 14.641306] drbd: built-in
[ 14.661758] drbd: registered as block device major 147
[ 14.682352] xen: registering gsi 16 triggering 0 polarity 1
[ 14.682356] Already setup the GSI :16
[ 14.712312] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20141107/utaddress-258)
[ 14.752679] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.773754] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
[ 14.816869] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.839241] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
[ 14.884614] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.908052] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
[ 14.956214] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.981313] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 15.006560] Loading iSCSI transport class v2.0-870.
[ 15.032116] hv_vmbus: registering driver hv_storvsc
[ 15.057447] ahci 0000:00:1f.2: version 3.0
[ 15.057533] xen: registering gsi 19 triggering 0 polarity 1
[ 15.057536] Already setup the GSI :19
[ 15.082766] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[ 15.108263] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 15.134380] scsi host0: ahci
[ 15.159445] scsi host1: ahci
[ 15.183989] scsi host2: ahci
[ 15.207909] scsi host3: ahci
[ 15.231505] scsi host4: ahci
[ 15.254742] scsi host5: ahci
[ 15.277572] ata1: SATA max UDMA/133 abar m2048@0xf7d36000 port 0xf7d36100 irq 56
[ 15.300788] ata2: DUMMY
[ 15.323504] ata3: DUMMY
[ 15.345771] ata4: DUMMY
[ 15.367698] ata5: DUMMY
[ 15.389347] ata6: DUMMY
[ 15.410922] xen: registering gsi 18 triggering 0 polarity 1
[ 15.410926] Already setup the GSI :18
[ 15.433003] scsi host6: ata_generic
[ 15.454383] scsi host7: ata_generic
[ 15.475051] ata7: PATA max UDMA/100 cmd 0xf130 ctl 0xf120 bmdma 0xf0f0 irq 18
[ 15.495925] ata8: PATA max UDMA/100 cmd 0xf110 ctl 0xf100 bmdma 0xf0f8 irq 18
[ 15.516581] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 15.537821] eql: Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
[ 15.559287] libphy: Fixed MDIO Bus: probed
[ 15.580084] tun: Universal TUN/TAP device driver, 1.6
[ 15.600781] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 15.621696] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 15.642823] e100: Copyright(c) 1999-2006 Intel Corporation
[ 15.664166] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 15.686596] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 15.708186] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 15.725140] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 15.751645] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 15.751673] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 15.751675] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 15.751677] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 15.795325] ata1.00: supports DRM functions and may not be fully accessible
[ 15.837471] ata1.00: disabling queued TRIM support
[ 15.837474] ata1.00: ATA-9: Crucial_CT120M500SSD3, MU05, max UDMA/133
[ 15.837505] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
[ 15.837507] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 15.837550] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
[ 15.837551] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 15.837591] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.0.1-k
[ 15.837592] ixgbe: Copyright (c) 1999-2014 Intel Corporation.
[ 15.837657] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.12.1-k
[ 15.837658] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 15.837693] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[ 15.837695] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[ 15.837844] xen_netfront: Initialising Xen virtual ethernet driver
[ 15.837939] usbcore: registered new interface driver asix
[ 15.837966] usbcore: registered new interface driver ax88179_178a
[ 15.838539] xen: registering gsi 16 triggering 0 polarity 1
[ 15.838546] Already setup the GSI :16
[ 15.838654] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 15.838855] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 15.839007] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 15.839282] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 15.839286] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 15.839290] usb usb1: Product: xHCI Host Controller
[ 15.839293] usb usb1: Manufacturer: Linux 3.19.0-rc5-creanuc-20150119-doflr-apicv4-apicpcipt12+ xhci-hcd
[ 15.839296] usb usb1: SerialNumber: 0000:00:14.0
[ 15.839740] hub 1-0:1.0: USB hub found
[ 15.839760] hub 1-0:1.0: 4 ports detected
[ 15.840413] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 15.840473] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 15.840506] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 15.840508] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 15.840509] usb usb2: Product: xHCI Host Controller
[ 15.840510] usb usb2: Manufacturer: Linux 3.19.0-rc5-creanuc-20150119-doflr-apicv4-apicpcipt12+ xhci-hcd
[ 15.840511] usb usb2: SerialNumber: 0000:00:14.0
[ 15.840651] hub 2-0:1.0: USB hub found
[ 15.840661] hub 2-0:1.0: 4 ports detected
[ 15.841096] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 15.841110] ehci-pci: EHCI PCI platform driver
[ 15.841190] xen: registering gsi 16 triggering 0 polarity 1
[ 15.841192] Already setup the GSI :16
[ 15.841221] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 15.841282] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 15.841301] ehci-pci 0000:00:1a.0: debug port 2
[ 15.845236] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 15.845274] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d38000
[ 15.857128] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 15.857171] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 15.857172] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 15.857173] usb usb3: Product: EHCI Host Controller
[ 15.857174] usb usb3: Manufacturer: Linux 3.19.0-rc5-creanuc-20150119-doflr-apicv4-apicpcipt12+ ehci_hcd
[ 15.857175] usb usb3: SerialNumber: 0000:00:1a.0
[ 15.857316] hub 3-0:1.0: USB hub found
[ 15.857322] hub 3-0:1.0: 3 ports detected
[ 15.857519] xen: registering gsi 23 triggering 0 polarity 1
[ 15.857521] Already setup the GSI :23
[ 15.857548] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 15.857611] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 15.857630] ehci-pci 0000:00:1d.0: debug port 2
[ 15.861562] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 15.861599] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d37000
[ 15.873128] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 15.873170] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 15.873171] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 15.873172] usb usb4: Product: EHCI Host Controller
[ 15.873173] usb usb4: Manufacturer: Linux 3.19.0-rc5-creanuc-20150119-doflr-apicv4-apicpcipt12+ ehci_hcd
[ 15.873174] usb usb4: SerialNumber: 0000:00:1d.0
[ 15.873316] hub 4-0:1.0: USB hub found
[ 15.873322] hub 4-0:1.0: 3 ports detected
[ 15.873453] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 15.873459] ohci-pci: OHCI PCI platform driver
[ 15.873469] ohci-platform: OHCI generic platform driver
[ 15.873480] uhci_hcd: USB Universal Host Controller Interface driver
[ 15.873521] usbcore: registered new interface driver usb-storage
[ 15.873551] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 16.915478] i8042: No controller found
[ 16.915498] hv_vmbus: registering driver hyperv_keyboard
[ 16.915624] mousedev: PS/2 mouse device common for all mice
[ 16.915824] rtc_cmos 00:01: RTC can wake from S4
[ 16.915998] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 16.916054] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[ 16.916232] i2c /dev entries driver
[ 16.916402] xen: registering gsi 18 triggering 0 polarity 1
[ 16.916403] Already setup the GSI :18
[ 16.916413] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20141107/utaddress-258)
[ 16.916414] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.916518] pps_ldisc: PPS line discipline registered
[ 16.956193] w83627ehf: Found NCT6776F chip at 0xa30
[ 16.956579] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 16.956613] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 16.956632] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 16.956731] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.956741] iTCO_vendor_support: vendor-support=0
[ 16.956743] xen_wdt: Xen WatchDog Timer Driver v0.01
[ 16.956768] xen_wdt: cannot register miscdev on minor=130 (-16)
[ 16.956770] wdt: probe of wdt failed with error -16
[ 16.956823] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
[ 16.956876] device-mapper: uevent: version 1.0.3
[ 16.956972] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[ 16.957135] device-mapper: multipath: version 1.7.0 loaded
[ 16.957139] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 16.957179] leds_ss4200: no LED devices found
[ 16.957206] hidraw: raw HID events driver (C) Jiri Kosina
[ 16.957327] usbcore: registered new interface driver usbhid
[ 16.957327] usbhid: USB HID core driver
[ 16.957336] hv_utils: Registering HyperV Utility Driver
[ 16.957336] hv_vmbus: registering driver hv_util
[ 16.957561] usbcore: registered new interface driver snd-usb-audio
[ 16.957572] usbcore: registered new interface driver snd-ua101
[ 16.957584] usbcore: registered new interface driver snd-usb-usx2y
[ 16.957595] usbcore: registered new interface driver snd-usb-us122l
[ 16.957607] usbcore: registered new interface driver snd-usb-caiaq
[ 16.957618] usbcore: registered new interface driver snd-usb-6fire
[ 16.957629] usbcore: registered new interface driver snd-usb-hiface
[ 16.957651] GACT probability on
[ 16.957654] Mirror/redirect action on
[ 16.957658] Simple TC action Loaded
[ 16.957755] netem: version 1.3
[ 16.957763] u32 classifier
[ 16.957763] Performance counters on
[ 16.957763] input device check on
[ 16.957764] Actions configured
[ 16.957778] Netfilter messages via NETLINK v0.30.
[ 16.957781] nfnl_acct: registering with nfnetlink.
[ 16.957791] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 16.957865] ctnetlink v0.93: registering with nfnetlink.
[ 16.957999] xt_time: kernel timezone is -0000
[ 16.958003] ip_set: protocol 6
[ 16.958027] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
[ 16.958042] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[ 16.958065] IPVS: Creating netns size=1984 id=0
[ 16.958073] IPVS: ipvs loaded.
[ 16.958076] IPVS: [rr] scheduler registered.
[ 16.958079] IPVS: [wrr] scheduler registered.
[ 16.958081] IPVS: [lc] scheduler registered.
[ 16.958083] IPVS: [wlc] scheduler registered.
[ 16.958087] IPVS: [lblc] scheduler registered.
[ 16.958090] IPVS: [lblcr] scheduler registered.
[ 16.958092] IPVS: [dh] scheduler registered.
[ 16.958094] IPVS: [sh] scheduler registered.
[ 16.958097] IPVS: [sed] scheduler registered.
[ 16.958099] IPVS: [nq] scheduler registered.
[ 16.958194] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 16.958229] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[ 16.958243] arp_tables: (C) 2002 David S. Miller
[ 16.958255] TCP: cubic registered
[ 16.958258] Initializing XFRM netlink socket
[ 16.958340] NET: Registered protocol family 10
[ 16.958628] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 16.958646] NET: Registered protocol family 17
[ 16.958651] NET: Registered protocol family 15
[ 16.958658] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 16.958659] Ebtables v2.0 registered
[ 16.958736] NET: Registered protocol family 33
[ 16.958739] Key type rxrpc registered
[ 16.958740] Key type rxrpc_s registered
[ 16.958752] 8021q: 802.1Q VLAN Support v1.8
[ 16.958766] Key type dns_resolver registered
[ 16.958768] openvswitch: Open vSwitch switching datapath
[ 16.958816] mpls_gso: MPLS GSO support
[ 16.959252] registered taskstats version 1
[ 16.959639] Btrfs loaded
[ 17.125138] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 17.125155] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 17.125168] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 17.254345] usb 1-3: New USB device found, idVendor=0d8c, idProduct=013c
[ 17.254347] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 17.254348] usb 1-3: Product: USB PnP Sound Device
[ 17.254349] usb 1-3: Manufacturer: C-Media Electronics Inc.
[ 17.257438] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 17.257439] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 17.257472] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 17.257473] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 17.257585] hub 3-1:1.0: USB hub found
[ 17.257708] hub 4-1:1.0: USB hub found
[ 17.257713] hub 3-1:1.0: 6 ports detected
[ 17.257809] hub 4-1:1.0: 8 ports detected
[ 17.262114] input: C-Media Electronics Inc. USB PnP Sound Device as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.3/0003:0D8C:013C.0001/input/input2
[ 17.317295] hid-generic 0003:0D8C:013C.0001: input,hidraw0: USB HID v1.00 Device [C-Media Electronics Inc. USB PnP Sound Device] on usb-0000:00:14.0-3/input3
[ 17.529236] usb 4-1.5: new high-speed USB device number 3 using ehci-pci
[ 17.634101] usb 4-1.5: New USB device found, idVendor=0b95, idProduct=772b
[ 17.634102] usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 17.634103] usb 4-1.5: Product: AX88772C
[ 17.634104] usb 4-1.5: Manufacturer: ASIX Elec. Corp.
[ 17.634105] usb 4-1.5: SerialNumber: 000001
[ 18.436319] asix 4-1.5:1.0 eth0: register 'asix' at usb-0000:00:1d.0-1.5, ASIX AX88772B USB 2.0 Ethernet, 00:0e:c6:f7:a4:2a
[ 19.063340] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 19.068167] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 19.068175] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 19.068181] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 19.068495] ata1.00: supports DRM functions and may not be fully accessible
[ 19.071374] ata1.00: disabling queued TRIM support
[ 19.074588] ata1.00: configured for UDMA/133
[ 19.074905] scsi 0:0:0:0: Direct-Access ATA Crucial_CT120M50 MU05 PQ: 0 ANSI: 5
[ 19.075188] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 19.075192] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 19.075193] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 19.075278] sd 0:0:0:0: [sda] Write Protect is off
[ 19.075280] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 19.075305] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 19.076099] sda: sda1
[ 19.077027] sd 0:0:0:0: [sda] Attached SCSI disk
[ 19.316667] console [netcon0] enabled
[ 19.337566] netconsole: network logging started
[ 19.356408] rtc_cmos 00:01: setting system clock to 2015-01-19 09:56:57 UTC (1421661417)
[ 19.375875] ALSA device list:
[ 19.395137] #0: C-Media Electronics Inc. USB PnP Sound Device at usb-0000:00:14.0-3, full speed
[ 19.415566] Freeing unused kernel memory: 1016K (ffffffff81eeb000 - ffffffff81fe9000)
[ 19.435802] Write protecting the kernel read-only data: 14336k
[ 19.459865] Freeing unused kernel memory: 1300K (ffff8800018bb000 - ffff880001a00000)
[ 19.481133] Freeing unused kernel memory: 900K (ffff880001d1f000 - ffff880001e00000)
[ 19.626133] udevd[186]: starting version 175
[ 19.984645] random: lvm urandom read with 90 bits of entropy available
[ 20.305559] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 21.159480] udevd[499]: starting version 175
[ 21.200946] random: nonblocking pool is initialized
[ 21.777047] asix 4-1.5:1.0 eth-rescue: renamed from eth0
[ 22.904041] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 23.084602] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 24.548564] Adding 1949692k swap on /dev/mapper/creanuc-creanuc_swap. Priority:-1 extents:1 across:1949692k SS
[ 24.942626] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 26.576651] IPv6: ADDRCONF(NETDEV_UP): eth-rescue: link is not ready
[ 26.617028] asix 4-1.5:1.0 eth-rescue: link down
[ 28.282400] IPv6: ADDRCONF(NETDEV_CHANGE): eth-rescue: link becomes ready
[ 28.316528] asix 4-1.5:1.0 eth-rescue: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 35.302508] device xen_ovs_bridge entered promiscuous mode
[ 38.950925] device vif1.0 entered promiscuous mode
[ 38.985532] IPv6: ADDRCONF(NETDEV_UP): vif1.0: link is not ready
[ 39.347260] device vif1.0-emu entered promiscuous mode
[ 39.418500] pciback 0000:02:00.0: resetting (FLR, D3, bus) the device
[ 40.655410] pciback 0000:00:19.0: resetting (FLR, D3, ) the device
[ 40.824959] xen_pciback: vpci: 0000:02:00.0: assign to virtual slot 0
[ 40.852679] pciback 0000:02:00.0: registering for 1
[ 40.872721] xen_pciback: vpci: 0000:00:19.0: assign to virtual slot 1
[ 40.896524] pciback 0000:00:19.0: registering for 1
[ 46.459561] device vif2.0 entered promiscuous mode
[ 46.488611] IPv6: ADDRCONF(NETDEV_UP): vif2.0: link is not ready
[ 46.620357] device vif2.0-emu entered promiscuous mode
[ 68.730656] xen-blkback:ring-ref 8, event-channel 25, protocol 2 (x86_32-abi) persistent grants
[ 68.763260] xen-blkback:ring-ref 9, event-channel 26, protocol 2 (x86_32-abi) persistent grants
[ 69.515978] vif vif-2-0 vif2.0: Guest Rx ready
[ 69.537766] IPv6: ADDRCONF(NETDEV_CHANGE): vif2.0: link becomes ready
[ 72.382623] xen-blkback:ring-ref 8, event-channel 11, protocol 1 (x86_64-abi) persistent grants
[ 80.199336] vif vif-1-0 vif1.0: Guest Rx ready
[ 80.221627] IPv6: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready
[ 2361.607881] irq 18: nobody cared (try booting with the "irqpoll" option)
[ 2361.650103] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.19.0-rc5-creanuc-20150119-doflr-apicv4-apicpcipt12+ #1
[ 2361.670344] Hardware name: /D53427RKE, BIOS RKPPT10H.86A.0017.2013.0425.1251 04/25/2013
[ 2361.690787] 0000000000000000 ffff8800596aee8c ffffffff818af9e7 ffff8800596aee00
[ 2361.711547] ffffffff8108151c ffff8800596aee00 0000000000000000 0000000000000000
[ 2361.732474] ffffffff81081929 0000000000000000 0000000000000000 0000000000000012
[ 2361.753265] Call Trace:
[ 2361.773907] <IRQ> [<ffffffff818af9e7>] ? dump_stack+0x40/0x50
[ 2361.795077] [<ffffffff8108151c>] ? __report_bad_irq+0x1e/0xbb
[ 2361.815844] [<ffffffff81081929>] ? note_interrupt+0x1a9/0x234
[ 2361.835965] [<ffffffff8107fa8f>] ? handle_irq_event_percpu+0xd7/0xf1
[ 2361.856384] [<ffffffff8107fae0>] ? handle_irq_event+0x37/0x57
[ 2361.876775] [<ffffffff81082212>] ? handle_fasteoi_irq+0x74/0xcb
[ 2361.896812] [<ffffffff8107f47a>] ? generic_handle_irq+0x15/0x20
[ 2361.916476] [<ffffffff813bf5e7>] ? evtchn_fifo_handle_events+0x138/0x16f
[ 2361.936105] [<ffffffff813bd3a5>] ? __xen_evtchn_do_upcall+0x39/0x69
[ 2361.955986] [<ffffffff813be71d>] ? xen_evtchn_do_upcall+0x27/0x36
[ 2361.975998] [<ffffffff818b881e>] ? xen_do_hypervisor_callback+0x1e/0x30
[ 2361.996017] <EOI> [<ffffffff810013aa>] ? xen_hypercall_sched_op+0xa/0x20
[ 2362.016394] [<ffffffff810013aa>] ? xen_hypercall_sched_op+0xa/0x20
[ 2362.036886] [<ffffffff81007138>] ? xen_safe_halt+0xc/0x13
[ 2362.057118] [<ffffffff81013add>] ? default_idle+0x5/0x8
[ 2362.077309] [<ffffffff81078b52>] ? cpu_startup_entry+0x114/0x25e
[ 2362.097612] [<ffffffff81effe9d>] ? start_kernel+0x422/0x42d
[ 2362.118041] [<ffffffff81eff880>] ? set_init_arg+0x50/0x50
[ 2362.138141] [<ffffffff81f029a0>] ? xen_start_kernel+0x4d3/0x4db
[ 2362.157862] handlers:
[ 2362.177280] [<ffffffff8157567e>] ata_bmdma_interrupt
[ 2362.196805] Disabling IRQ #18
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09)
Subsystem: Intel Corporation Device [8086:204f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Device [8086:204f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-

00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Intel Corporation Device [8086:204f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 57
Region 0: Memory at f7d20000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
Address: 00000000fee002d8 Data: 0000
Kernel driver in use: xhci_hcd

00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Intel Corporation Device [8086:204f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 55
Region 0: Memory at f7d3c000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00298 Data: 0000
Kernel driver in use: mei_me

00:16.3 Serial controller [0700]: Intel Corporation 7 Series/C210 Series Chipset Family KT Controller [8086:1e3d] (rev 04) (prog-if 02 [16550])
Subsystem: Intel Corporation Device [8086:204f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f0e0 [size=8]
Region 1: Memory at f7d3a000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: serial

00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
Subsystem: Intel Corporation Device [8086:204f]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 20
Region 0: Memory at f7d00000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f7d39000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f080 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 00000000fee002f8 Data: 0000
Capabilities: [e0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: pciback

00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:204f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7d38000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci

00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Intel Corporation Device [8086:204f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 3
Region 0: Memory at f7d30000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=22
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000

00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Intel Corporation Device [8086:204f]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 [8086:1e14] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f7c00000-f7cfffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #2, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Intel Corporation Device [8086:204f]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:204f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7d37000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci-pci

00:1f.0 ISA bridge [0601]: Intel Corporation QS77 Express Chipset LPC Controller [8086:1e56] (rev 04)
Subsystem: Intel Corporation Device [8086:204f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation Device [8086:204f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 56
Region 0: I/O ports at f0d0 [size=8]
Region 1: I/O ports at f0c0 [size=4]
Region 2: I/O ports at f0b0 [size=8]
Region 3: I/O ports at f0a0 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7d36000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee002b8 Data: 0000
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
Subsystem: Intel Corporation Device [8086:204f]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7d35000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]

02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
Subsystem: Lenovo Device [17aa:30a1]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00
Capabilities: [170 v1] Power Budgeting <?>
Kernel driver in use: pciback

CPU0 CPU1 CPU2 CPU3
8: 0 0 0 0 xen-pirq-ioapic-edge rtc0
9: 0 0 0 0 xen-pirq-ioapic-level acpi
16: 37 0 0 0 xen-pirq-ioapic-level ehci_hcd:usb3
23: 1709 0 0 0 xen-pirq-ioapic-level ehci_hcd:usb4
24: 15496 0 0 0 xen-percpu-virq timer0
25: 0 0 0 0 xen-percpu-ipi spinlock0
26: 3782 0 0 0 xen-percpu-ipi resched0
27: 2164 0 0 0 xen-percpu-ipi callfunc0
28: 0 0 0 0 xen-percpu-virq debug0
29: 356 0 0 0 xen-percpu-ipi callfuncsingle0
30: 0 0 0 0 xen-percpu-ipi irqwork0
31: 0 3591 0 0 xen-percpu-virq timer1
32: 0 0 0 0 xen-percpu-ipi spinlock1
33: 0 14521 0 0 xen-percpu-ipi resched1
34: 0 2151 0 0 xen-percpu-ipi callfunc1
35: 0 0 0 0 xen-percpu-virq debug1
36: 0 458 0 0 xen-percpu-ipi callfuncsingle1
37: 0 0 0 0 xen-percpu-ipi irqwork1
38: 0 0 8115 0 xen-percpu-virq timer2
39: 0 0 7 0 xen-percpu-ipi spinlock2
40: 0 0 42267 0 xen-percpu-ipi resched2
41: 0 0 289 0 xen-percpu-ipi callfunc2
42: 0 0 0 0 xen-percpu-virq debug2
43: 0 0 310 0 xen-percpu-ipi callfuncsingle2
44: 0 0 0 0 xen-percpu-ipi irqwork2
45: 0 0 0 4359 xen-percpu-virq timer3
46: 0 0 0 0 xen-percpu-ipi spinlock3
47: 0 0 0 63576 xen-percpu-ipi resched3
48: 0 0 0 2211 xen-percpu-ipi callfunc3
49: 0 0 0 0 xen-percpu-virq debug3
50: 0 0 0 394 xen-percpu-ipi callfuncsingle3
51: 0 0 0 0 xen-percpu-ipi irqwork3
52: 2458 0 0 0 xen-dyn-event xenbus
53: 0 0 0 0 xen-percpu-virq xen-pcpu
55: 25 0 0 0 xen-pirq-msi mei_me
56: 21199 0 0 0 xen-pirq-msi 0000:00:1f.2
57: 140 0 0 0 xen-pirq-msi xhci_hcd
58: 1231 0 0 0 xen-dyn-event evtchn:xenstored
59: 0 0 0 0 xen-dyn-event evtchn:xenstored
60: 413 0 0 0 xen-dyn-event evtchn:xenstored
61: 1 0 0 0 xen-dyn-event evtchn:xenconsoled
62: 1263092 0 0 0 xen-dyn-event evtchn:qemu-system-i38
63: 47 0 0 0 xen-dyn-event evtchn:qemu-system-i38
64: 537 0 0 0 xen-dyn-event evtchn:xenstored
65: 1 0 0 0 xen-dyn-event evtchn:xenconsoled
66: 339812 0 0 0 xen-dyn-event evtchn:qemu-system-i38
67: 19098 0 0 0 xen-dyn-event evtchn:qemu-system-i38
68: 2231 0 0 0 xen-dyn-event evtchn:qemu-system-i38
69: 58 0 0 0 xen-dyn-event evtchn:qemu-system-i38
70: 8436 0 0 0 xen-dyn-event blkif-backend
71: 1597 0 0 0 xen-dyn-event blkif-backend
72: 8 0 0 0 xen-dyn-event vif2.0-q0-tx
73: 1 0 0 0 xen-dyn-event vif2.0-q0-rx
74: 497 0 0 0 xen-dyn-event blkif-backend
75: 33 0 0 0 xen-dyn-event vif1.0-q0-tx
76: 1 0 0 0 xen-dyn-event vif1.0-q0-rx
NMI: 0 0 0 0 Non-maskable interrupts
LOC: 0 0 0 0 Local timer interrupts
SPU: 0 0 0 0 Spurious interrupts
PMI: 0 0 0 0 Performance monitoring interrupts
IWI: 0 0 0 0 IRQ work interrupts
RTR: 0 0 0 0 APIC ICR read retries
RES: 3782 14521 42267 63576 Rescheduling interrupts
CAL: 2520 2609 599 2605 Function call interrupts
TLB: 0 0 0 0 TLB shootdowns
TRM: 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 Machine check exceptions
MCP: 1 1 1 1 Machine check polls
THR: 1654186 20672 50934 70482 Hypervisor callback interrupts
ERR: 0
MIS: 0
f8000000 segment 0000 buses 00 - 3f
(XEN) PCI: MCFG area at f8000000 reserved in E820
(XEN) PCI: Using MCFG for segment 0000 bus 00-3f
(XEN) Intel VT-d iommu 0 supported page sizes: 4kB.
(XEN) Intel VT-d iommu 1 supported page sizes: 4kB.
(XEN) Intel VT-d Snoop Control not enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation enabled.
(XEN) Intel VT-d Interrupt Remapping enabled.
(XEN) Intel VT-d Shared EPT tables not enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Interrupt remapping enabled
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using old ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) TSC deadline timer enabled
(XEN) [2015-01-19 09:56:40.036] Platform timer is 14.318MHz HPET
(XEN) [2015-01-19 09:56:40.064] Allocated console ring of 32 KiB.
(XEN) [2015-01-19 09:56:40.093] mwait-idle: MWAIT substates: 0x21120
(XEN) [2015-01-19 09:56:40.122] mwait-idle: v0.4 model 0x3a
(XEN) [2015-01-19 09:56:40.151] mwait-idle: lapic_timer_reliable_states 0xffffffff
(XEN) [2015-01-19 09:56:40.181] VMX: Supported advanced features:
(XEN) [2015-01-19 09:56:40.210] - APIC MMIO access virtualisation
(XEN) [2015-01-19 09:56:40.240] - APIC TPR shadow
(XEN) [2015-01-19 09:56:40.269] - Extended Page Tables (EPT)
(XEN) [2015-01-19 09:56:40.298] - Virtual-Processor Identifiers (VPID)
(XEN) [2015-01-19 09:56:40.328] - Virtual NMI
(XEN) [2015-01-19 09:56:40.357] - MSR direct-access bitmap
(XEN) [2015-01-19 09:56:40.387] - Unrestricted Guest
(XEN) [2015-01-19 09:56:40.416] HVM: ASIDs enabled.
(XEN) [2015-01-19 09:56:40.446] HVM: VMX enabled
(XEN) [2015-01-19 09:56:40.475] HVM: Hardware Assisted Paging (HAP) detected
(XEN) [2015-01-19 09:56:40.505] HVM: HAP page sizes: 4kB, 2MB
(XEN) [2015-01-19 09:56:40.537] Brought up 4 CPUs
(XEN) [2015-01-19 09:56:40.590] ACPI sleep modes: S3
(XEN) [2015-01-19 09:56:40.621] mcheck_poll: Machine check polling timer started.
(XEN) [2015-01-19 09:56:40.651] Dom0 has maximum 600 PIRQs
(XEN) [2015-01-19 09:56:40.681] *** LOADING DOMAIN 0 ***
(XEN) [2015-01-19 09:56:41.031] elf_parse_binary: phdr: paddr=0x1000000 memsz=0xd1f000
(XEN) [2015-01-19 09:56:41.062] elf_parse_binary: phdr: paddr=0x1e00000 memsz=0xeb000
(XEN) [2015-01-19 09:56:41.093] elf_parse_binary: phdr: paddr=0x1eeb000 memsz=0x13900
(XEN) [2015-01-19 09:56:41.125] elf_parse_binary: phdr: paddr=0x1eff000 memsz=0x1be000
(XEN) [2015-01-19 09:56:41.157] elf_parse_binary: memory: 0x1000000 -> 0x20bd000
(XEN) [2015-01-19 09:56:41.189] elf_xen_parse_note: GUEST_OS = "linux"
(XEN) [2015-01-19 09:56:41.221] elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) [2015-01-19 09:56:41.253] elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) [2015-01-19 09:56:41.286] elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) [2015-01-19 09:56:41.319] elf_xen_parse_note: ENTRY = 0xffffffff81eff1f0
(XEN) [2015-01-19 09:56:41.353] elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81001000
(XEN) [2015-01-19 09:56:41.386] elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb"
(XEN) [2015-01-19 09:56:41.421] elf_xen_parse_note: SUPPORTED_FEATURES = 0x801
(XEN) [2015-01-19 09:56:41.455] elf_xen_parse_note: PAE_MODE = "yes"
(XEN) [2015-01-19 09:56:41.489] elf_xen_parse_note: LOADER = "generic"
(XEN) [2015-01-19 09:56:41.523] elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) [2015-01-19 09:56:41.558] elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) [2015-01-19 09:56:41.593] elf_xen_parse_note: MOD_START_PFN = 0x1
(XEN) [2015-01-19 09:56:41.627] elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
(XEN) [2015-01-19 09:56:41.663] elf_xen_parse_note: PADDR_OFFSET = 0x0
(XEN) [2015-01-19 09:56:41.699] elf_xen_addr_calc_check: addresses:
(XEN) [2015-01-19 09:56:41.734] virt_base = 0xffffffff80000000
(XEN) [2015-01-19 09:56:41.770] elf_paddr_offset = 0x0
(XEN) [2015-01-19 09:56:41.806] virt_offset = 0xffffffff80000000
(XEN) [2015-01-19 09:56:41.843] virt_kstart = 0xffffffff81000000
(XEN) [2015-01-19 09:56:41.880] virt_kend = 0xffffffff820bd000
(XEN) [2015-01-19 09:56:41.917] virt_entry = 0xffffffff81eff1f0
(XEN) [2015-01-19 09:56:41.955] p2m_base = 0xffffffffffffffff
(XEN) [2015-01-19 09:56:41.992] Xen kernel: 64-bit, lsb, compat32
(XEN) [2015-01-19 09:56:42.031] Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x20bd000
(XEN) [2015-01-19 09:56:42.070] PHYSICAL MEMORY ARRANGEMENT:
(XEN) [2015-01-19 09:56:42.109] Dom0 alloc.: 0000000210000000->0000000214000000 (372799 pages to be allocated)
(XEN) [2015-01-19 09:56:42.151] Init. ramdisk: 000000021d63f000->000000021e5ff600
(XEN) [2015-01-19 09:56:42.191] VIRTUAL MEMORY ARRANGEMENT:
(XEN) [2015-01-19 09:56:42.231] Loaded kernel: ffffffff81000000->ffffffff820bd000
(XEN) [2015-01-19 09:56:42.271] Init. ramdisk: 0000000000000000->0000000000000000
(XEN) [2015-01-19 09:56:42.311] Phys-Mach map: ffffffff820bd000->ffffffff823bd000
(XEN) [2015-01-19 09:56:42.351] Start info: ffffffff823bd000->ffffffff823bd4b4
(XEN) [2015-01-19 09:56:42.391] Page tables: ffffffff823be000->ffffffff823d5000
(XEN) [2015-01-19 09:56:42.432] Boot stack: ffffffff823d5000->ffffffff823d6000
(XEN) [2015-01-19 09:56:42.472] TOTAL: ffffffff80000000->ffffffff82800000
(XEN) [2015-01-19 09:56:42.513] ENTRY ADDRESS: ffffffff81eff1f0
(XEN) [2015-01-19 09:56:42.555] Dom0 has maximum 4 VCPUs
(XEN) [2015-01-19 09:56:42.596] elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff81d1f000
(XEN) [2015-01-19 09:56:42.641] elf_load_binary: phdr 1 at 0xffffffff81e00000 -> 0xffffffff81eeb000
(XEN) [2015-01-19 09:56:42.683] elf_load_binary: phdr 2 at 0xffffffff81eeb000 -> 0xffffffff81efe900
(XEN) [2015-01-19 09:56:42.726] elf_load_binary: phdr 3 at 0xffffffff81eff000 -> 0xffffffff81ff5000
(XEN) [2015-01-19 09:56:44.307] [VT-D]iommu.c:1420: d0:Hostbridge: skip 0000:00:00.0 map
(XEN) [2015-01-19 09:56:44.350] Bogus DMIBAR 0xfed18001 on 0000:00:00.0
(XEN) [2015-01-19 09:56:44.393] [VT-D]iommu.c:1446: d0:PCI: map 0000:00:02.0
(XEN) [2015-01-19 09:56:44.436] [VT-D]iommu.c:1446: d0:PCI: map 0000:00:14.0
(XEN) [2015-01-19 09:56:44.479] [VT-D]iommu.c:1446: d0:PCI: map 0000:00:16.0
(XEN) [2015-01-19 09:56:44.522] [VT-D]iommu.c:1446: d0:PCI: map 0000:00:16.2
(XEN) [2015-01-19 09:56:44.566] [VT-D]iommu.c:1446: d0:PCI: map 0000:00:16.3
(XEN) [2015-01-19 09:56:44.609] [VT-D]iommu.c:1446: d0:PCI: map 0000:00:19.0
(XEN) [2015-01-19 09:56:44.652] [VT-D]iommu.c:1446: d0:PCI: map 0000:00:1a.0
(XEN) [2015-01-19 09:56:44.695] [VT-D]iommu.c:1434: d0:PCIe: map 0000:00:1b.0
(XEN) [2015-01-19 09:56:44.738] [VT-D]iommu.c:1446: d0:PCI: map 0000:00:1d.0
(XEN) [2015-01-19 09:56:44.781] [VT-D]iommu.c:1446: d0:PCI: map 0000:00:1f.0
(XEN) [2015-01-19 09:56:44.824] [VT-D]iommu.c:1446: d0:PCI: map 0000:00:1f.2
(XEN) [2015-01-19 09:56:44.867] [VT-D]iommu.c:1446: d0:PCI: map 0000:00:1f.3
(XEN) [2015-01-19 09:56:44.910] [VT-D]iommu.c:1434: d0:PCIe: map 0000:02:00.0
(XEN) [2015-01-19 09:56:44.963] [VT-D]iommu.c:729: iommu_enable_translation: iommu->reg = ffff82c000602000
(XEN) [2015-01-19 09:56:45.007] [VT-D]iommu.c:729: iommu_enable_translation: iommu->reg = ffff82c000604000
(XEN) [2015-01-19 09:56:45.050] Scrubbing Free RAM on 1 nodes using 2 CPUs
(XEN) [2015-01-19 09:56:45.120] ..................................done.
(XEN) [2015-01-19 09:56:45.826] Initial low memory virq threshold set at 0x4000 pages.
(XEN) [2015-01-19 09:56:45.869] Std. Loglevel: All
(XEN) [2015-01-19 09:56:45.913] Guest Loglevel: All
(XEN) [2015-01-19 09:56:45.956] Xen is relinquishing VGA console.
(XEN) [2015-01-19 09:56:46.284] *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) [2015-01-19 09:56:46.284] Freed 280kB init memory.
(XEN) [2015-01-19 09:56:46.414] traps.c:2644:d0v0 Domain attempted WRMSR 00000000c0000081 from 0xe023e00800000000 to 0x0023001000000000.
(XEN) [2015-01-19 09:56:46.414] traps.c:2644:d0v0 Domain attempted WRMSR 00000000c0000082 from 0xffff82d0802e3000 to 0xffffffff818b70f0.
(XEN) [2015-01-19 09:56:46.414] traps.c:2644:d0v0 Domain attempted WRMSR 00000000c0000083 from 0xffff82d0802e3080 to 0xffffffff818b8f40.
(XEN) [2015-01-19 09:56:46.414] traps.c:2644:d0v0 Domain attempted WRMSR 00000000c0000084 from 0x0000000000074700 to 0x0000000000047700.
(XEN) [2015-01-19 09:56:46.507] traps.c:2644:d0v1 Domain attempted WRMSR 00000000c0000081 from 0xe023e00800000000 to 0x0023001000000000.
(XEN) [2015-01-19 09:56:46.507] traps.c:2644:d0v1 Domain attempted WRMSR 00000000c0000082 from 0xffff830217b7b000 to 0xffffffff818b70f0.
(XEN) [2015-01-19 09:56:46.507] traps.c:2644:d0v1 Domain attempted WRMSR 00000000c0000083 from 0xffff830217b7b080 to 0xffffffff818b8f40.
(XEN) [2015-01-19 09:56:46.507] traps.c:2644:d0v1 Domain attempted WRMSR 00000000c0000084 from 0x0000000000074700 to 0x0000000000047700.
(XEN) [2015-01-19 09:56:46.508] traps.c:2644:d0v2 Domain attempted WRMSR 00000000c0000081 from 0xe023e00800000000 to 0x0023001000000000.
(XEN) [2015-01-19 09:56:46.508] traps.c:2644:d0v2 Domain attempted WRMSR 00000000c0000082 from 0xffff830217b6b000 to 0xffffffff818b70f0.
(XEN) [2015-01-19 09:56:46.508] traps.c:2644:d0v2 Domain attempted WRMSR 00000000c0000083 from 0xffff830217b6b080 to 0xffffffff818b8f40.
(XEN) [2015-01-19 09:56:46.508] traps.c:2644:d0v2 Domain attempted WRMSR 00000000c0000084 from 0x0000000000074700 to 0x0000000000047700.
(XEN) [2015-01-19 09:56:46.509] traps.c:2644:d0v3 Domain attempted WRMSR 00000000c0000081 from 0xe023e00800000000 to 0x0023001000000000.
(XEN) [2015-01-19 09:56:46.509] traps.c:2644:d0v3 Domain attempted WRMSR 00000000c0000082 from 0xffff830217b63000 to 0xffffffff818b70f0.
(XEN) [2015-01-19 09:56:46.509] traps.c:2644:d0v3 Domain attempted WRMSR 00000000c0000083 from 0xffff830217b63080 to 0xffffffff818b8f40.
(XEN) [2015-01-19 09:56:46.509] traps.c:2644:d0v3 Domain attempted WRMSR 00000000c0000084 from 0x0000000000074700 to 0x0000000000047700.
(XEN) [2015-01-19 09:56:46.808] Bogus DMIBAR 0xfed18001 on 0000:00:00.0
(XEN) [2015-01-19 09:56:46.808] PCI add device 0000:00:00.0
(XEN) [2015-01-19 09:56:46.808] PCI add device 0000:00:02.0
(XEN) [2015-01-19 09:56:46.809] PCI add device 0000:00:14.0
(XEN) [2015-01-19 09:56:46.809] PCI add device 0000:00:16.0
(XEN) [2015-01-19 09:56:46.810] PCI add device 0000:00:16.2
(XEN) [2015-01-19 09:56:46.810] PCI add device 0000:00:16.3
(XEN) [2015-01-19 09:56:46.811] PCI add device 0000:00:19.0
(XEN) [2015-01-19 09:56:46.811] PCI add device 0000:00:1a.0
(XEN) [2015-01-19 09:56:46.811] PCI add device 0000:00:1b.0
(XEN) [2015-01-19 09:56:46.812] PCI add device 0000:00:1c.0
(XEN) [2015-01-19 09:56:46.812] PCI add device 0000:00:1c.2
(XEN) [2015-01-19 09:56:46.813] PCI add device 0000:00:1d.0
(XEN) [2015-01-19 09:56:46.813] PCI add device 0000:00:1f.0
(XEN) [2015-01-19 09:56:46.814] PCI add device 0000:00:1f.2
(XEN) [2015-01-19 09:56:46.814] PCI add device 0000:00:1f.3
(XEN) [2015-01-19 09:56:46.815] PCI add device 0000:02:00.0
(XEN) [2015-01-19 09:57:18.659] io.c:429: d1: bind: m_gsi=18 g_gsi=36 dev=00.00.5 intx=0
(XEN) [2015-01-19 09:57:18.796] [VT-D]iommu.c:1573: d0:PCIe: unmap 0000:02:00.0
(XEN) [2015-01-19 09:57:18.796] [VT-D]iommu.c:1434: d1:PCIe: map 0000:02:00.0
(XEN) [2015-01-19 09:57:18.943] io.c:429: d1: bind: m_gsi=20 g_gsi=40 dev=00.00.6 intx=0
(XEN) [2015-01-19 09:57:18.954] [VT-D]iommu.c:1583: d0:PCI: unmap 0000:00:19.0
(XEN) [2015-01-19 09:57:18.954] [VT-D]iommu.c:1446: d1:PCI: map 0000:00:19.0
(d1) [2015-01-19 09:57:18.975] HVM Loader
(d1) [2015-01-19 09:57:18.976] Detected Xen v4.6.0-unstable
(d1) [2015-01-19 09:57:18.977] Xenbus rings @0xfeffc000, event channel 1
(d1) [2015-01-19 09:57:18.978] System requested SeaBIOS
(d1) [2015-01-19 09:57:18.978] CPU speed is 2295 MHz
(d1) [2015-01-19 09:57:18.980] Relocating guest memory for lowmem MMIO space disabled
(XEN) [2015-01-19 09:57:18.981] irq.c:270: Dom1 PCI link 0 changed 0 -> 5
(d1) [2015-01-19 09:57:18.982] PCI-ISA link 0 routed to IRQ5
(XEN) [2015-01-19 09:57:18.982] irq.c:270: Dom1 PCI link 1 changed 0 -> 10
(d1) [2015-01-19 09:57:18.983] PCI-ISA link 1 routed to IRQ10
(XEN) [2015-01-19 09:57:18.983] irq.c:270: Dom1 PCI link 2 changed 0 -> 11
(d1) [2015-01-19 09:57:18.983] PCI-ISA link 2 routed to IRQ11
(XEN) [2015-01-19 09:57:18.984] irq.c:270: Dom1 PCI link 3 changed 0 -> 5
(d1) [2015-01-19 09:57:18.984] PCI-ISA link 3 routed to IRQ5
(d1) [2015-01-19 09:57:19.000] pci dev 01:3 INTA->IRQ10
(d1) [2015-01-19 09:57:19.004] pci dev 02:0 INTA->IRQ11
(d1) [2015-01-19 09:57:19.015] pci dev 04:0 INTA->IRQ5
(d1) [2015-01-19 09:57:19.021] pci dev 05:0 INTA->IRQ10
(d1) [2015-01-19 09:57:19.028] pci dev 06:0 INTA->IRQ11
(d1) [2015-01-19 09:57:19.070] No RAM in high memory; setting high_mem resource base to 100000000
(d1) [2015-01-19 09:57:19.070] pci dev 03:0 bar 10 size 002000000: 0f0000008
(d1) [2015-01-19 09:57:19.073] pci dev 02:0 bar 14 size 001000000: 0f2000008
(d1) [2015-01-19 09:57:19.075] pci dev 04:0 bar 30 size 000040000: 0f3000000
(d1) [2015-01-19 09:57:19.078] pci dev 04:0 bar 10 size 000020000: 0f3040000
(d1) [2015-01-19 09:57:19.079] pci dev 06:0 bar 10 size 000020000: 0f3060000
(XEN) [2015-01-19 09:57:19.079] memory_map:add: dom1 gfn=f3060 mfn=f7d00 nr=20
(d1) [2015-01-19 09:57:19.082] pci dev 03:0 bar 30 size 000010000: 0f3080000
(d1) [2015-01-19 09:57:19.083] pci dev 05:0 bar 10 size 000010000: 0f3090004
(XEN) [2015-01-19 09:57:19.083] memory_map:add: dom1 gfn=f3090 mfn=f7c00 nr=10
(d1) [2015-01-19 09:57:19.088] pci dev 03:0 bar 14 size 000001000: 0f30a0000
(XEN) [2015-01-19 09:57:19.089] memory_map:add: dom1 gfn=f30a1 mfn=f7d39 nr=1
(d1) [2015-01-19 09:57:19.092] pci dev 06:0 bar 14 size 000001000: 0f30a1000
(d1) [2015-01-19 09:57:19.093] pci dev 02:0 bar 10 size 000000100: 00000c001
(d1) [2015-01-19 09:57:19.096] pci dev 04:0 bar 14 size 000000040: 00000c101
(d1) [2015-01-19 09:57:19.099] pci dev 06:0 bar 18 size 000000020: 00000c141
(XEN) [2015-01-19 09:57:19.099] ioport_map:add: dom1 gport=c140 mport=f080 nr=20
(d1) [2015-01-19 09:57:19.103] pci dev 01:1 bar 20 size 000000010: 00000c161
(d1) [2015-01-19 09:57:19.105] Multiprocessor initialisation:
(d1) [2015-01-19 09:57:19.128] - CPU0 ... 36-bit phys ... fixed MTRRs ... var MTRRs [1/8] ... done.
(d1) [2015-01-19 09:57:19.128] Testing HVM environment:
(d1) [2015-01-19 09:57:19.148] - REP INSB across page boundaries ... passed
(d1) [2015-01-19 09:57:19.159] - GS base MSRs and SWAPGS ... passed
(d1) [2015-01-19 09:57:19.159] Passed 2 of 2 tests
(d1) [2015-01-19 09:57:19.159] Writing SMBIOS tables ...
(d1) [2015-01-19 09:57:19.160] Loading SeaBIOS ...
(d1) [2015-01-19 09:57:19.160] Creating MP tables ...
(d1) [2015-01-19 09:57:19.160] Loading ACPI ...
(d1) [2015-01-19 09:57:19.162] vm86 TSS at fc00a100
(d1) [2015-01-19 09:57:19.163] BIOS map:
(d1) [2015-01-19 09:57:19.163] 10000-100d3: Scratch space
(d1) [2015-01-19 09:57:19.163] c0000-fffff: Main BIOS
(d1) [2015-01-19 09:57:19.163] E820 table:
(d1) [2015-01-19 09:57:19.163] [00]: 00000000:00000000 - 00000000:000a0000: RAM
(d1) [2015-01-19 09:57:19.163] HOLE: 00000000:000a0000 - 00000000:000c0000
(d1) [2015-01-19 09:57:19.163] [01]: 00000000:000c0000 - 00000000:00100000: RESERVED
(d1) [2015-01-19 09:57:19.163] [02]: 00000000:00100000 - 00000000:3f800000: RAM
(d1) [2015-01-19 09:57:19.163] HOLE: 00000000:3f800000 - 00000000:fc000000
(d1) [2015-01-19 09:57:19.163] [03]: 00000000:fc000000 - 00000001:00000000: RESERVED
(d1) [2015-01-19 09:57:19.163] Invoking SeaBIOS ...
(d1) [2015-01-19 09:57:19.165] SeaBIOS (version rel-1.7.5-0-ge51488c-20150113_194935-creanuc)
(d1) [2015-01-19 09:57:19.165]
(d1) [2015-01-19 09:57:19.165] Found Xen hypervisor signature at 40000000
(d1) [2015-01-19 09:57:19.165] Running on QEMU (i440fx)
(d1) [2015-01-19 09:57:19.165] xen: copy e820...
(d1) [2015-01-19 09:57:19.165] Relocating init from 0x000df629 to 0x3f7ae600 (size 71995)
(d1) [2015-01-19 09:57:19.167] CPU Mhz=2294
(d1) [2015-01-19 09:57:19.171] Found 9 PCI devices (max PCI bus is 00)
(d1) [2015-01-19 09:57:19.171] Allocated Xen hypercall page at 3f7ff000
(d1) [2015-01-19 09:57:19.171] Detected Xen v4.6.0-unstable
(d1) [2015-01-19 09:57:19.171] xen: copy BIOS tables...
(d1) [2015-01-19 09:57:19.171] Copying SMBIOS entry point from 0x00010010 to 0x000f0f50
(d1) [2015-01-19 09:57:19.171] Copying MPTABLE from 0xfc001140/fc001150 to 0x000f0e70
(d1) [2015-01-19 09:57:19.171] Copying PIR from 0x00010030 to 0x000f0df0
(d1) [2015-01-19 09:57:19.171] Copying ACPI RSDP from 0x000100b0 to 0x000f0dc0
(d1) [2015-01-19 09:57:19.171] Using pmtimer, ioport 0xb008
(d1) [2015-01-19 09:57:19.171] Scan for VGA option rom
(d1) [2015-01-19 09:57:19.189] Running option rom at c000:0003
(XEN) [2015-01-19 09:57:19.194] stdvga.c:147:d1v0 entering stdvga and caching modes
(d1) [2015-01-19 09:57:19.220] pmm call arg1=0
(d1) [2015-01-19 09:57:19.221] Turning on vga text mode console
(d1) [2015-01-19 09:57:19.272] SeaBIOS (version rel-1.7.5-0-ge51488c-20150113_194935-creanuc)
(d1) [2015-01-19 09:57:19.280] Machine UUID ef15cd6a-9996-4f93-901e-c3d9de12fa46
(d1) [2015-01-19 09:57:19.280] All threads complete.
(d1) [2015-01-19 09:57:19.281] Found 0 lpt ports
(d1) [2015-01-19 09:57:19.281] Found 1 serial ports
(d1) [2015-01-19 09:57:19.281] ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9)
(d1) [2015-01-19 09:57:19.282] ATA controller 2 at 170/374/0 (irq 15 dev 9)
(d1) [2015-01-19 09:57:19.285] ata0-0: QEMU HARDDISK ATA-7 Hard-Disk (1024 MiBytes)
(d1) [2015-01-19 09:57:19.285] Searching bootorder for: /pci@i0cf8/*@1,1/drive@0/disk@0
(d1) [2015-01-19 09:57:19.286] DVD/CD [ata1-0: QEMU DVD-ROM ATAPI-4 DVD/CD]
(d1) [2015-01-19 09:57:19.287] Searching bootorder for: /pci@i0cf8/*@1,1/drive@1/disk@0
(d1) [2015-01-19 09:57:19.383] PS2 keyboard initialized
(d1) [2015-01-19 09:57:19.383] All threads complete.
(d1) [2015-01-19 09:57:19.383] Scan for option roms
(d1) [2015-01-19 09:57:19.400] Running option rom at c980:0003
(d1) [2015-01-19 09:57:19.404] pmm call arg1=1
(d1) [2015-01-19 09:57:19.404] pmm call arg1=0
(d1) [2015-01-19 09:57:19.405] pmm call arg1=1
(d1) [2015-01-19 09:57:19.405] pmm call arg1=0
(d1) [2015-01-19 09:57:19.415] Searching bootorder for: /pci@i0cf8/*@4
(d1) [2015-01-19 09:57:19.415]
(d1) [2015-01-19 09:57:19.419] Press F12 for boot menu.
(d1) [2015-01-19 09:57:19.420]
(d1) [2015-01-19 09:57:21.975] Searching bootorder for: HALT
(d1) [2015-01-19 09:57:21.975] drive 0x000f0d70: PCHS=8065/5/52 translation=none LCHS=1024/5/52 s=2097152
(d1) [2015-01-19 09:57:21.976] Space available for UMB: ca800-ee800, f0000-f0d10
(d1) [2015-01-19 09:57:21.976] Returned 258048 bytes of ZoneHigh
(d1) [2015-01-19 09:57:21.976] e820 map has 6 items:
(d1) [2015-01-19 09:57:21.976] 0: 0000000000000000 - 000000000009fc00 = 1 RAM
(d1) [2015-01-19 09:57:21.976] 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
(d1) [2015-01-19 09:57:21.977] 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
(d1) [2015-01-19 09:57:21.977] 3: 0000000000100000 - 000000003f7ff000 = 1 RAM
(d1) [2015-01-19 09:57:21.977] 4: 000000003f7ff000 - 000000003f800000 = 2 RESERVED
(d1) [2015-01-19 09:57:21.977] 5: 00000000fc000000 - 0000000100000000 = 2 RESERVED
(d1) [2015-01-19 09:57:21.978] enter handle_19:
(d1) [2015-01-19 09:57:21.978] NULL
(d1) [2015-01-19 09:57:21.992] Booting from Hard Disk...
(d1) [2015-01-19 09:57:21.995] Booting from 0000:7c00
(d2) [2015-01-19 09:57:24.805] HVM Loader
(d2) [2015-01-19 09:57:24.805] Detected Xen v4.6.0-unstable
(d2) [2015-01-19 09:57:24.805] Xenbus rings @0xfeffc000, event channel 1
(d2) [2015-01-19 09:57:24.806] System requested SeaBIOS
(d2) [2015-01-19 09:57:24.806] CPU speed is 2295 MHz
(d2) [2015-01-19 09:57:24.806] Relocating guest memory for lowmem MMIO space disabled
(XEN) [2015-01-19 09:57:24.806] irq.c:270: Dom2 PCI link 0 changed 0 -> 5
(d2) [2015-01-19 09:57:24.806] PCI-ISA link 0 routed to IRQ5
(XEN) [2015-01-19 09:57:24.806] irq.c:270: Dom2 PCI link 1 changed 0 -> 10
(d2) [2015-01-19 09:57:24.806] PCI-ISA link 1 routed to IRQ10
(XEN) [2015-01-19 09:57:24.806] irq.c:270: Dom2 PCI link 2 changed 0 -> 11
(d2) [2015-01-19 09:57:24.807] PCI-ISA link 2 routed to IRQ11
(XEN) [2015-01-19 09:57:24.807] irq.c:270: Dom2 PCI link 3 changed 0 -> 5
(d2) [2015-01-19 09:57:24.807] PCI-ISA link 3 routed to IRQ5
(d2) [2015-01-19 09:57:24.822] pci dev 01:3 INTA->IRQ10
(d2) [2015-01-19 09:57:24.826] pci dev 02:0 INTA->IRQ11
(d2) [2015-01-19 09:57:24.834] pci dev 04:0 INTA->IRQ5
(d2) [2015-01-19 09:57:24.870] No RAM in high memory; setting high_mem resource base to 100000000
(d2) [2015-01-19 09:57:24.870] pci dev 03:0 bar 10 size 002000000: 0f0000008
(d2) [2015-01-19 09:57:24.873] pci dev 02:0 bar 14 size 001000000: 0f2000008
(d2) [2015-01-19 09:57:24.875] pci dev 04:0 bar 30 size 000040000: 0f3000000
(d2) [2015-01-19 09:57:24.877] pci dev 04:0 bar 10 size 000020000: 0f3040000
(d2) [2015-01-19 09:57:24.877] pci dev 03:0 bar 30 size 000010000: 0f3060000
(d2) [2015-01-19 09:57:24.879] pci dev 03:0 bar 14 size 000001000: 0f3070000
(d2) [2015-01-19 09:57:24.880] pci dev 02:0 bar 10 size 000000100: 00000c001
(d2) [2015-01-19 09:57:24.881] pci dev 04:0 bar 14 size 000000040: 00000c101
(d2) [2015-01-19 09:57:24.883] pci dev 01:1 bar 20 size 000000010: 00000c141
(d2) [2015-01-19 09:57:24.885] Multiprocessor initialisation:
(d2) [2015-01-19 09:57:24.895] - CPU0 ... 36-bit phys ... fixed MTRRs ... var MTRRs [1/8] ... done.
(d2) [2015-01-19 09:57:24.905] - CPU1 ... 36-bit phys ... fixed MTRRs ... var MTRRs [1/8] ... done.
(d2) [2015-01-19 09:57:24.915] - CPU2 ... 36-bit phys ... fixed MTRRs ... var MTRRs [1/8] ... done.
(d2) [2015-01-19 09:57:24.915] Testing HVM environment:
(d2) [2015-01-19 09:57:24.932] - REP INSB across page boundaries ... passed
(d2) [2015-01-19 09:57:24.944] - GS base MSRs and SWAPGS ... passed
(d2) [2015-01-19 09:57:24.944] Passed 2 of 2 tests
(d2) [2015-01-19 09:57:24.944] Writing SMBIOS tables ...
(d2) [2015-01-19 09:57:24.945] Loading SeaBIOS ...
(d2) [2015-01-19 09:57:24.945] Creating MP tables ...
(d2) [2015-01-19 09:57:24.945] Loading ACPI ...
(d2) [2015-01-19 09:57:24.946] vm86 TSS at fc00a180
(d2) [2015-01-19 09:57:24.947] BIOS map:
(d2) [2015-01-19 09:57:24.947] 10000-100d3: Scratch space
(d2) [2015-01-19 09:57:24.947] c0000-fffff: Main BIOS
(d2) [2015-01-19 09:57:24.947] E820 table:
(d2) [2015-01-19 09:57:24.947] [00]: 00000000:00000000 - 00000000:000a0000: RAM
(d2) [2015-01-19 09:57:24.947] HOLE: 00000000:000a0000 - 00000000:000c0000
(d2) [2015-01-19 09:57:24.947] [01]: 00000000:000c0000 - 00000000:00100000: RESERVED
(d2) [2015-01-19 09:57:24.947] [02]: 00000000:00100000 - 00000000:7f800000: RAM
(d2) [2015-01-19 09:57:24.947] HOLE: 00000000:7f800000 - 00000000:fc000000
(d2) [2015-01-19 09:57:24.947] [03]: 00000000:fc000000 - 00000001:00000000: RESERVED
(d2) [2015-01-19 09:57:24.947] Invoking SeaBIOS ...
(d2) [2015-01-19 09:57:24.949] SeaBIOS (version rel-1.7.5-0-ge51488c-20150113_194935-creanuc)
(d2) [2015-01-19 09:57:24.949]
(d2) [2015-01-19 09:57:24.949] Found Xen hypervisor signature at 40000000
(d2) [2015-01-19 09:57:24.949] Running on QEMU (i440fx)
(d2) [2015-01-19 09:57:24.949] xen: copy e820...
(d2) [2015-01-19 09:57:24.949] Relocating init from 0x000df629 to 0x7f7ae600 (size 71995)
(d2) [2015-01-19 09:57:24.952] CPU Mhz=2296
(d2) [2015-01-19 09:57:24.955] Found 7 PCI devices (max PCI bus is 00)
(d2) [2015-01-19 09:57:24.955] Allocated Xen hypercall page at 7f7ff000
(d2) [2015-01-19 09:57:24.955] Detected Xen v4.6.0-unstable
(d2) [2015-01-19 09:57:24.955] xen: copy BIOS tables...
(d2) [2015-01-19 09:57:24.956] Copying SMBIOS entry point from 0x00010010 to 0x000f0f50
(d2) [2015-01-19 09:57:24.956] Copying MPTABLE from 0xfc001190/fc0011a0 to 0x000f0e40
(d2) [2015-01-19 09:57:24.956] Copying PIR from 0x00010030 to 0x000f0dc0
(d2) [2015-01-19 09:57:24.956] Copying ACPI RSDP from 0x000100b0 to 0x000f0d90
(d2) [2015-01-19 09:57:24.956] Using pmtimer, ioport 0xb008
(d2) [2015-01-19 09:57:24.956] Scan for VGA option rom
(d2) [2015-01-19 09:57:24.969] Running option rom at c000:0003
(XEN) [2015-01-19 09:57:24.976] stdvga.c:147:d2v0 entering stdvga and caching modes
(d2) [2015-01-19 09:57:24.998] pmm call arg1=0
(d2) [2015-01-19 09:57:24.999] Turning on vga text mode console
(d2) [2015-01-19 09:57:25.066] SeaBIOS (version rel-1.7.5-0-ge51488c-20150113_194935-creanuc)
(d2) [2015-01-19 09:57:25.075] Machine UUID 7a6c108a-47c9-4a68-beea-018164e4b86f
(d2) [2015-01-19 09:57:25.076] All threads complete.
(d2) [2015-01-19 09:57:25.077] Found 0 lpt ports
(d2) [2015-01-19 09:57:25.077] Found 1 serial ports
(d2) [2015-01-19 09:57:25.077] ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9)
(d2) [2015-01-19 09:57:25.078] ATA controller 2 at 170/374/0 (irq 15 dev 9)
(d2) [2015-01-19 09:57:25.082] ata0-0: QEMU HARDDISK ATA-7 Hard-Disk (70 GiBytes)
(d2) [2015-01-19 09:57:25.082] Searching bootorder for: /pci@i0cf8/*@1,1/drive@0/disk@0
(d2) [2015-01-19 09:57:25.083] ata0-1: QEMU HARDDISK ATA-7 Hard-Disk (10240 MiBytes)
(d2) [2015-01-19 09:57:25.083] Searching bootorder for: /pci@i0cf8/*@1,1/drive@0/disk@1
(d2) [2015-01-19 09:57:25.180] PS2 keyboard initialized
(d2) [2015-01-19 09:57:25.180] All threads complete.
(d2) [2015-01-19 09:57:25.180] Scan for option roms
(d2) [2015-01-19 09:57:25.198] Running option rom at c980:0003
(d2) [2015-01-19 09:57:25.203] pmm call arg1=1
(d2) [2015-01-19 09:57:25.204] pmm call arg1=0
(d2) [2015-01-19 09:57:25.205] pmm call arg1=1
(d2) [2015-01-19 09:57:25.205] pmm call arg1=0
(d2) [2015-01-19 09:57:25.218] Searching bootorder for: /pci@i0cf8/*@4
(d2) [2015-01-19 09:57:25.218]
(d2) [2015-01-19 09:57:25.224] Press F12 for boot menu.
(d2) [2015-01-19 09:57:25.224]
(d2) [2015-01-19 09:57:27.796] Searching bootorder for: HALT
(d2) [2015-01-19 09:57:27.796] drive 0x000f0d40: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=146800640
(d2) [2015-01-19 09:57:27.796]
(d2) [2015-01-19 09:57:27.796] drive 0x000f0d10: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=20971520
(d2) [2015-01-19 09:57:27.796] Space available for UMB: ca800-ef000, f0000-f0d10
(d2) [2015-01-19 09:57:27.796] Returned 258048 bytes of ZoneHigh
(d2) [2015-01-19 09:57:27.796] e820 map has 6 items:
(d2) [2015-01-19 09:57:27.797] 0: 0000000000000000 - 000000000009fc00 = 1 RAM
(d2) [2015-01-19 09:57:27.797] 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
(d2) [2015-01-19 09:57:27.797] 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
(d2) [2015-01-19 09:57:27.797] 3: 0000000000100000 - 000000007f7ff000 = 1 RAM
(d2) [2015-01-19 09:57:27.797] 4: 000000007f7ff000 - 000000007f800000 = 2 RESERVED
(d2) [2015-01-19 09:57:27.797] 5: 00000000fc000000 - 0000000100000000 = 2 RESERVED
(d2) [2015-01-19 09:57:27.797] enter handle_19:
(d2) [2015-01-19 09:57:27.797] NULL
(d2) [2015-01-19 09:57:27.802] Booting from Hard Disk...
(d2) [2015-01-19 09:57:27.804] Booting from 0000:7c00
(XEN) [2015-01-19 09:57:36.856] irq.c:380: Dom1 callback via changed to Direct Vector 0xf3
(XEN) [2015-01-19 09:57:40.456] memory_map:remove: dom1 gfn=f3090 mfn=f7c00 nr=10
(XEN) [2015-01-19 09:57:40.460] memory_map:add: dom1 gfn=f3090 mfn=f7c00 nr=10
(XEN) [2015-01-19 09:57:40.462] memory_map:remove: dom1 gfn=f3090 mfn=f7c00 nr=10
(XEN) [2015-01-19 09:57:40.465] memory_map:add: dom1 gfn=f3090 mfn=f7c00 nr=10
(XEN) [2015-01-19 09:57:40.467] memory_map:remove: dom1 gfn=f3090 mfn=f7c00 nr=10
(XEN) [2015-01-19 09:57:40.470] memory_map:add: dom1 gfn=f3090 mfn=f7c00 nr=10
(XEN) [2015-01-19 09:57:40.473] memory_map:remove: dom1 gfn=f3090 mfn=f7c00 nr=10
(XEN) [2015-01-19 09:57:40.476] memory_map:add: dom1 gfn=f3090 mfn=f7c00 nr=10
(XEN) [2015-01-19 09:57:40.478] memory_map:remove: dom1 gfn=f3090 mfn=f7c00 nr=10
(XEN) [2015-01-19 09:57:40.481] memory_map:add: dom1 gfn=f3090 mfn=f7c00 nr=10
(XEN) [2015-01-19 09:57:40.484] memory_map:remove: dom1 gfn=f3090 mfn=f7c00 nr=10
(XEN) [2015-01-19 09:57:40.487] memory_map:add: dom1 gfn=f3090 mfn=f7c00 nr=10
(XEN) [2015-01-19 09:57:40.494] memory_map:remove: dom1 gfn=f3060 mfn=f7d00 nr=20
(XEN) [2015-01-19 09:57:40.495] memory_map:remove: dom1 gfn=f30a1 mfn=f7d39 nr=1
(XEN) [2015-01-19 09:57:40.496] ioport_map:remove: dom1 gport=c140 mport=f080 nr=20
(XEN) [2015-01-19 09:57:40.499] memory_map:add: dom1 gfn=f3060 mfn=f7d00 nr=20
(XEN) [2015-01-19 09:57:40.500] memory_map:add: dom1 gfn=f30a1 mfn=f7d39 nr=1
(XEN) [2015-01-19 09:57:40.501] ioport_map:add: dom1 gport=c140 mport=f080 nr=20
(XEN) [2015-01-19 09:57:40.504] memory_map:remove: dom1 gfn=f3060 mfn=f7d00 nr=20
(XEN) [2015-01-19 09:57:40.504] memory_map:remove: dom1 gfn=f30a1 mfn=f7d39 nr=1
(XEN) [2015-01-19 09:57:40.505] ioport_map:remove: dom1 gport=c140 mport=f080 nr=20
(XEN) [2015-01-19 09:57:40.508] memory_map:add: dom1 gfn=f3060 mfn=f7d00 nr=20
(XEN) [2015-01-19 09:57:40.509] memory_map:add: dom1 gfn=f30a1 mfn=f7d39 nr=1
(XEN) [2015-01-19 09:57:40.510] ioport_map:add: dom1 gport=c140 mport=f080 nr=20
(XEN) [2015-01-19 09:57:40.513] memory_map:remove: dom1 gfn=f3060 mfn=f7d00 nr=20
(XEN) [2015-01-19 09:57:40.514] memory_map:remove: dom1 gfn=f30a1 mfn=f7d39 nr=1
(XEN) [2015-01-19 09:57:40.515] ioport_map:remove: dom1 gport=c140 mport=f080 nr=20
(XEN) [2015-01-19 09:57:40.517] memory_map:add: dom1 gfn=f3060 mfn=f7d00 nr=20
(XEN) [2015-01-19 09:57:40.518] memory_map:add: dom1 gfn=f30a1 mfn=f7d39 nr=1
(XEN) [2015-01-19 09:57:40.519] ioport_map:add: dom1 gport=c140 mport=f080 nr=20
(XEN) [2015-01-19 09:57:40.522] memory_map:remove: dom1 gfn=f3060 mfn=f7d00 nr=20
(XEN) [2015-01-19 09:57:40.523] memory_map:remove: dom1 gfn=f30a1 mfn=f7d39 nr=1
(XEN) [2015-01-19 09:57:40.524] ioport_map:remove: dom1 gport=c140 mport=f080 nr=20
(XEN) [2015-01-19 09:57:40.526] memory_map:add: dom1 gfn=f3060 mfn=f7d00 nr=20
(XEN) [2015-01-19 09:57:40.527] memory_map:add: dom1 gfn=f30a1 mfn=f7d39 nr=1
(XEN) [2015-01-19 09:57:40.528] ioport_map:add: dom1 gport=c140 mport=f080 nr=20
(XEN) [2015-01-19 09:57:40.530] memory_map:remove: dom1 gfn=f3060 mfn=f7d00 nr=20
(XEN) [2015-01-19 09:57:40.531] memory_map:remove: dom1 gfn=f30a1 mfn=f7d39 nr=1
(XEN) [2015-01-19 09:57:40.532] ioport_map:remove: dom1 gport=c140 mport=f080 nr=20
(XEN) [2015-01-19 09:57:40.535] memory_map:add: dom1 gfn=f3060 mfn=f7d00 nr=20
(XEN) [2015-01-19 09:57:40.536] memory_map:add: dom1 gfn=f30a1 mfn=f7d39 nr=1
(XEN) [2015-01-19 09:57:40.537] ioport_map:add: dom1 gport=c140 mport=f080 nr=20
(XEN) [2015-01-19 09:57:40.539] memory_map:remove: dom1 gfn=f3060 mfn=f7d00 nr=20
(XEN) [2015-01-19 09:57:40.540] memory_map:remove: dom1 gfn=f30a1 mfn=f7d39 nr=1
(XEN) [2015-01-19 09:57:40.541] ioport_map:remove: dom1 gport=c140 mport=f080 nr=20
(XEN) [2015-01-19 09:57:40.544] memory_map:add: dom1 gfn=f3060 mfn=f7d00 nr=20
(XEN) [2015-01-19 09:57:40.545] memory_map:add: dom1 gfn=f30a1 mfn=f7d39 nr=1
(XEN) [2015-01-19 09:57:40.546] ioport_map:add: dom1 gport=c140 mport=f080 nr=20
(XEN) [2015-01-19 09:57:40.548] memory_map:remove: dom1 gfn=f3060 mfn=f7d00 nr=20
(XEN) [2015-01-19 09:57:40.549] memory_map:remove: dom1 gfn=f30a1 mfn=f7d39 nr=1
(XEN) [2015-01-19 09:57:40.550] ioport_map:remove: dom1 gport=c140 mport=f080 nr=20
(XEN) [2015-01-19 09:57:40.553] memory_map:add: dom1 gfn=f3060 mfn=f7d00 nr=20
(XEN) [2015-01-19 09:57:40.554] memory_map:add: dom1 gfn=f30a1 mfn=f7d39 nr=1
(XEN) [2015-01-19 09:57:40.555] ioport_map:add: dom1 gport=c140 mport=f080 nr=20
(XEN) [2015-01-19 09:57:40.580] irq.c:270: Dom1 PCI link 0 changed 5 -> 0
(XEN) [2015-01-19 09:57:40.596] irq.c:270: Dom1 PCI link 1 changed 10 -> 0
(XEN) [2015-01-19 09:57:40.611] irq.c:270: Dom1 PCI link 2 changed 11 -> 0
(XEN) [2015-01-19 09:57:40.629] irq.c:270: Dom1 PCI link 3 changed 5 -> 0
(XEN) [2015-01-19 09:57:41.743] stdvga.c:151:d1v0 leaving stdvga
(XEN) [2015-01-19 09:57:42.483] irq.c:380: Dom2 callback via changed to Direct Vector 0xf3
(XEN) [2015-01-19 09:57:45.492] irq.c:270: Dom2 PCI link 0 changed 5 -> 0
(XEN) [2015-01-19 09:57:45.506] irq.c:270: Dom2 PCI link 1 changed 10 -> 0
(XEN) [2015-01-19 09:57:45.519] irq.c:270: Dom2 PCI link 2 changed 11 -> 0
(XEN) [2015-01-19 09:57:45.533] irq.c:270: Dom2 PCI link 3 changed 5 -> 0
(XEN) [2015-01-19 09:58:06.698] grant_table.c:311:d0v2 Increased maptrack size to 2 frames
(XEN) [2015-01-19 09:58:06.717] grant_table.c:311:d0v2 Increased maptrack size to 3 frames
(XEN) [2015-01-19 09:58:07.460] grant_table.c:1305:d2v0 Expanding dom (2) grant table from (4) to (5) frames.
(XEN) [2015-01-19 09:58:07.461] grant_table.c:1305:d2v0 Expanding dom (2) grant table from (5) to (6) frames.
(XEN) [2015-01-19 09:58:07.478] grant_table.c:311:d0v1 Increased maptrack size to 4 frames
(XEN) [2015-01-19 09:58:07.495] grant_table.c:311:d0v1 Increased maptrack size to 5 frames
\
 
 \ /
  Last update: 2015-01-19 13:41    [W:1.246 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site