lkml.org 
[lkml]   [2015]   [Jan]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 2/5] ARM:sunxi:drivers:input Add support for A10/A20 PS2
Hello Dmitry,

Thank you for review comments. Please see in-lined.

On Sun, Jan 18, 2015 at 3:55 AM, Dmitry Torokhov
<dmitry.torokhov@gmail.com> wrote:
> Hi Vishnu,
>
> On Fri, Jan 16, 2015 at 07:33:38PM +0530, Vishnu Patekar wrote:
>> Signed-off-by: VishnuPatekar <vishnupatekar0510@gmail.com>
>> ---
>> drivers/input/serio/Kconfig | 11 ++
>> drivers/input/serio/Makefile | 1 +
>> drivers/input/serio/sun4i-ps2.c | 330 +++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 342 insertions(+)
>> create mode 100644 drivers/input/serio/sun4i-ps2.c
>>
>> diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
>> index bc2d474..964afc5 100644
>> --- a/drivers/input/serio/Kconfig
>> +++ b/drivers/input/serio/Kconfig
>> @@ -281,4 +281,15 @@ config HYPERV_KEYBOARD
>> To compile this driver as a module, choose M here: the module will
>> be called hyperv_keyboard.
>>
>> +config SERIO_SUN4I_PS2
>> + tristate "Allwinner A10 PS/2 controller support"
>> + default n
>> + depends on ARCH_SUNXI || COMPILE_TEST
>> + help
>> + This selects support for the PS/2 Host Controller on
>> + Allwinner A10.
>> +
>> + To compile this driver as a module, choose M here: the
>> + module will be called sun4i-ps2.
>> +
>> endif
>> diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile
>> index 815d874..c600089 100644
>> --- a/drivers/input/serio/Makefile
>> +++ b/drivers/input/serio/Makefile
>> @@ -29,3 +29,4 @@ obj-$(CONFIG_SERIO_ARC_PS2) += arc_ps2.o
>> obj-$(CONFIG_SERIO_APBPS2) += apbps2.o
>> obj-$(CONFIG_SERIO_OLPC_APSP) += olpc_apsp.o
>> obj-$(CONFIG_HYPERV_KEYBOARD) += hyperv-keyboard.o
>> +obj-$(CONFIG_SERIO_SUN4I_PS2) += sun4i-ps2.o
>> diff --git a/drivers/input/serio/sun4i-ps2.c b/drivers/input/serio/sun4i-ps2.c
>> new file mode 100644
>> index 0000000..06b3fef
>> --- /dev/null
>> +++ b/drivers/input/serio/sun4i-ps2.c
>> @@ -0,0 +1,330 @@
>> +/*
>> + * Driver for Allwinner A10 PS2 host controller
>> + *
>> + * Author: Vishnu Patekar <vishnupatekar0510@gmail.com>
>> + * Aaron.maoye <leafy.myeh@newbietech.com>
>> + *
>> + *
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/serio.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/errno.h>
>> +#include <linux/slab.h>
>> +#include <linux/list.h>
>> +#include <linux/io.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_device.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +
>> +#define DRIVER_NAME "sun4i-ps2"
>> +
>> +/* register offset definitions */
>> +#define PS2_REG_GCTL 0x00 /* PS2 Module Global Control Reg */
>> +#define PS2_REG_DATA 0x04 /* PS2 Module Data Reg */
>> +#define PS2_REG_LCTL 0x08 /* PS2 Module Line Control Reg */
>> +#define PS2_REG_LSTS 0x0C /* PS2 Module Line Status Reg */
>> +#define PS2_REG_FCTL 0x10 /* PS2 Module FIFO Control Reg */
>> +#define PS2_REG_FSTS 0x14 /* PS2 Module FIFO Status Reg */
>> +#define PS2_REG_CLKDR 0x18 /* PS2 Module Clock Divider Reg*/
>> +
>> +/* PS2 GLOBAL CONTROL REGISTER PS2_GCTL */
>> +#define PS2_GCTL_INTFLAG BIT(4)
>> +#define PS2_GCTL_INTEN BIT(3)
>> +#define PS2_GCTL_RESET BIT(2)
>> +#define PS2_GCTL_MASTER BIT(1)
>> +#define PS2_GCTL_BUSEN BIT(0)
>> +
>> +/* PS2 LINE CONTROL REGISTER */
>> +#define PS2_LCTL_NOACK BIT(18)
>> +#define PS2_LCTL_TXDTOEN BIT(8)
>> +#define PS2_LCTL_STOPERREN BIT(3)
>> +#define PS2_LCTL_ACKERREN BIT(2)
>> +#define PS2_LCTL_PARERREN BIT(1)
>> +#define PS2_LCTL_RXDTOEN BIT(0)
>> +
>> +/* PS2 LINE STATUS REGISTER */
>> +#define PS2_LSTS_TXTDO BIT(8)
>> +#define PS2_LSTS_STOPERR BIT(3)
>> +#define PS2_LSTS_ACKERR BIT(2)
>> +#define PS2_LSTS_PARERR BIT(1)
>> +#define PS2_LSTS_RXTDO BIT(0)
>> +
>> +#define PS2_LINE_ERROR_BIT \
>> + (PS2_LSTS_TXTDO | PS2_LSTS_STOPERR | PS2_LSTS_ACKERR | \
>> + PS2_LSTS_PARERR | PS2_LSTS_RXTDO)
>> +
>> +/* PS2 FIFO CONTROL REGISTER */
>> +#define PS2_FCTL_TXRST BIT(17)
>> +#define PS2_FCTL_RXRST BIT(16)
>> +#define PS2_FCTL_TXUFIEN BIT(10)
>> +#define PS2_FCTL_TXOFIEN BIT(9)
>> +#define PS2_FCTL_TXRDYIEN BIT(8)
>> +#define PS2_FCTL_RXUFIEN BIT(2)
>> +#define PS2_FCTL_RXOFIEN BIT(1)
>> +#define PS2_FCTL_RXRDYIEN BIT(0)
>> +
>> +/* PS2 FIFO STATUS REGISTER */
>> +#define PS2_FSTS_TXUF BIT(10)
>> +#define PS2_FSTS_TXOF BIT(9)
>> +#define PS2_FSTS_TXRDY BIT(8)
>> +#define PS2_FSTS_RXUF BIT(2)
>> +#define PS2_FSTS_RXOF BIT(1)
>> +#define PS2_FSTS_RXRDY BIT(0)
>> +
>> +#define PS2_FIFO_ERROR_BIT \
>> + (PS2_FSTS_TXUF | PS2_FSTS_TXOF | PS2_FSTS_RXUF | PS2_FSTS_RXOF)
>> +
>> +#define PS2_SAMPLE_CLK 1000000
>> +#define PS2_SCLK 125000
>> +
>> +struct sun4i_ps2data {
>> + struct serio *serio;
>> + struct device *dev;
>> +
>> + /* IO mapping base */
>> + void __iomem *reg_base;
>> +
>> + /* clock management */
>> + struct clk *clk;
>> +
>> + /* irq */
>> + spinlock_t lock;
>> + int irq;
>> +};
>> +
>> +/*********************/
>> +/* Interrupt handler */
>> +/*********************/
>> +static irqreturn_t sun4i_ps2_interrupt(int irq, void *dev_id)
>> +{
>> + struct sun4i_ps2data *drvdata = dev_id;
>> + u32 intr_status;
>> + u32 fifo_status;
>> + unsigned char byte;
>> + unsigned int rxflags = 0;
>> + u32 rval;
>> +
>> + spin_lock(&drvdata->lock);
>> +
>> + /* Get the PS/2 interrupts and clear them */
>> + intr_status = readl(drvdata->reg_base + PS2_REG_LSTS);
>> + fifo_status = readl(drvdata->reg_base + PS2_REG_FSTS);
>> +
>> + /*Check Line Status Register*/
>> + if (intr_status & PS2_LINE_ERROR_BIT) {
>> + rxflags = (intr_status & PS2_LINE_ERROR_BIT) ? SERIO_FRAME : 0;
>> + rxflags |= (intr_status & PS2_LSTS_PARERR) ? SERIO_PARITY : 0;
>> + rxflags |= (intr_status & PS2_LSTS_PARERR) ? SERIO_TIMEOUT : 0;
>> +
>> + rval = PS2_LSTS_TXTDO | PS2_LSTS_STOPERR | PS2_LSTS_ACKERR |
>> + PS2_LSTS_PARERR | PS2_LSTS_RXTDO;
>> + writel(rval, drvdata->reg_base + PS2_REG_LSTS);
>> + }
>> +
>> + /*Check FIFO Status Register*/
>> + if (fifo_status & PS2_FIFO_ERROR_BIT) {
>> + rval = PS2_FSTS_TXUF | PS2_FSTS_TXOF | PS2_FSTS_TXRDY |
>> + PS2_FSTS_RXUF | PS2_FSTS_RXOF | PS2_FSTS_RXRDY;
>> + writel(rval, drvdata->reg_base + PS2_REG_FSTS);
>> + }
>> +
>> + rval = (fifo_status >> 16) & 0x3;
>> + while (rval--) {
>> + byte = readl(drvdata->reg_base + PS2_REG_DATA) & 0xff;
>> + serio_interrupt(drvdata->serio, byte, rxflags);
>> + }
>> +
>> + writel(intr_status, drvdata->reg_base + PS2_REG_LSTS);
>> + writel(fifo_status, drvdata->reg_base + PS2_REG_FSTS);
>> +
>> + spin_unlock(&drvdata->lock);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +
>> +static int sun4i_ps2_open(struct serio *pserio)
>> +{
>> + struct sun4i_ps2data *drvdata = pserio->port_data;
>> + u32 src_clk = 0;
>> + u32 clk_scdf;
>> + u32 clk_pcdf;
>> + u32 rval;
>> + unsigned long flags;
>> +
>> + /*Set Line Control And Enable Interrupt*/
>> + rval = PS2_LCTL_STOPERREN | PS2_LCTL_ACKERREN
>> + | PS2_LCTL_PARERREN | PS2_LCTL_RXDTOEN;
>> + writel(rval, drvdata->reg_base + PS2_REG_LCTL);
>> +
>> + /*Reset FIFO*/
>> + rval = PS2_FCTL_TXRST | PS2_FCTL_RXRST | PS2_FCTL_TXUFIEN
>> + | PS2_FCTL_TXOFIEN | PS2_FCTL_RXUFIEN
>> + | PS2_FCTL_RXOFIEN | PS2_FCTL_RXRDYIEN;
>> +
>> + writel(rval, drvdata->reg_base + PS2_REG_FCTL);
>> +
>> + src_clk = clk_get_rate(drvdata->clk);
>> + /*Set Clock Divider Register*/
>> + clk_scdf = src_clk / PS2_SAMPLE_CLK - 1;
>> + clk_pcdf = PS2_SAMPLE_CLK / PS2_SCLK - 1;
>> + rval = (clk_scdf<<8) | clk_pcdf;
>> + writel(rval, drvdata->reg_base + PS2_REG_CLKDR);
>> +
>> +
>> + /*Set Global Control Register*/
>> + rval = PS2_GCTL_RESET | PS2_GCTL_INTEN | PS2_GCTL_MASTER
>> + | PS2_GCTL_BUSEN;
>> +
>> + spin_lock_irqsave(&drvdata->lock, flags);
>> + writel(rval, drvdata->reg_base + PS2_REG_GCTL);
>> + spin_unlock_irqrestore(&drvdata->lock, flags);
>> +
>> + return 0;
>> +}
>> +
>> +static void sun4i_ps2_close(struct serio *pserio)
>> +{
>> + struct sun4i_ps2data *drvdata = pserio->port_data;
>> +
>> + synchronize_irq(drvdata->irq);
>
> synchronize_irq() on it's own is not very useful. You also need to shut
> off interrupts on the chip (I suppose by clearing PS2_GCTL_INTEN?)
> before calling synchronize_irq.
Okie, I'll do it. Yes, clearing PS2_GCTL_INTEN will shut off the interrupts.
>
>> +}
>> +
>> +static int sun4i_ps2_write(struct serio *pserio, unsigned char val)
>> +{
>> + unsigned long expire = jiffies + msecs_to_jiffies(10000);
>> + struct sun4i_ps2data *drvdata;
>> +
>> + drvdata = (struct sun4i_ps2data *)pserio->port_data;
>> +
>> + do {
>> + if (readl(drvdata->reg_base + PS2_REG_FSTS) & PS2_FSTS_TXRDY) {
>> + writel(val, drvdata->reg_base + PS2_REG_DATA);
>> + return 0;
>> + }
>> + } while (time_before(jiffies, expire));
>> +
>> + return SERIO_TIMEOUT;
>> +}
>> +
>> +static int sun4i_ps2_probe(struct platform_device *pdev)
>> +{
>> + struct resource *res; /* IO mem resources */
>> + struct sun4i_ps2data *drvdata;
>> + struct serio *serio;
>> + struct device *dev = &pdev->dev;
>> + unsigned int irq;
>> + int error;
>> +
>> + drvdata = devm_kzalloc(dev, sizeof(struct sun4i_ps2data), GFP_KERNEL);
>> + serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
>> + if (!drvdata || !serio) {
>> + error = -ENOMEM;
>> + goto err_free_mem;
>> + }
>> +
>> + spin_lock_init(&drvdata->lock);
>> +
>> + /* IO */
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + drvdata->reg_base = devm_ioremap_resource(dev, res);
>> + if (IS_ERR(drvdata->reg_base)) {
>> + dev_err(dev, "failed to map registers\n");
>> + error = PTR_ERR(drvdata->reg_base);
>> + goto err_free_mem;
>> + }
>> +
>> + drvdata->clk = devm_clk_get(dev, NULL);
>> + if (IS_ERR(drvdata->clk)) {
>> + error = PTR_ERR(drvdata->clk);
>> + dev_err(dev, "couldn't get clock %d\n", error);
>> + goto err_free_mem;
>> + }
>> +
>> + error = clk_prepare_enable(drvdata->clk);
>> + if (error) {
>> + dev_err(dev, "failed to enable clock %d\n", error);
>> + goto err_free_mem;
>> + }
>> +
>> + serio->id.type = SERIO_8042;
>> + serio->write = sun4i_ps2_write;
>> + serio->open = sun4i_ps2_open;
>> + serio->close = sun4i_ps2_close;
>> + serio->port_data = drvdata;
>> + serio->dev.parent = dev;
>> + strlcpy(serio->name, dev_name(dev), sizeof(serio->name));
>> + strlcpy(serio->phys, dev_name(dev), sizeof(serio->phys));
>> +
>> + /* Get IRQ for the device */
>> + irq = platform_get_irq(pdev, 0);
>> + if (!irq) {
>> + dev_err(dev, "no IRQ found\n");
>> + error = -ENXIO;
>> + goto error_disable_clk;
>> + }
>> +
>> + drvdata->irq = irq;
>> + drvdata->serio = serio;
>> + drvdata->dev = dev;
>> + error = devm_request_threaded_irq(dev, drvdata->irq,
>> + sun4i_ps2_interrupt, NULL, 0, DRIVER_NAME, drvdata);
>> +
>> + if (error) {
>> + dev_err(drvdata->dev, "Interrupt alloc failed %d:error:%d\n",
>> + drvdata->irq, error);
>> + goto error_disable_clk;
>> + }
>> +
>> + serio_register_port(serio);
>> + platform_set_drvdata(pdev, drvdata);
>> +
>> + return 0; /* success */
>> +
>> +error_disable_clk:
>> + clk_disable_unprepare(drvdata->clk);
>> +
>> +err_free_mem:
>> + kfree(serio);
>> + return error;
>> +}
>> +
>> +static int sun4i_ps2_remove(struct platform_device *pdev)
>> +{
>> + struct sun4i_ps2data *drvdata = platform_get_drvdata(pdev);
>> +
>> + serio_unregister_port(drvdata->serio);
>> +
>> + if (!IS_ERR(drvdata->clk))
>> + clk_disable_unprepare(drvdata->clk);
>> + kfree(drvdata->serio);
>
> Serio is refcounted, you do not free it after its has been registered.
> Overall I'd rather you did not use devm* interfaces here since you are
> forced to mix managed and manually freed resources.
Okie, No need to free serio here.
If serio is not manually freed here, It is not freeing anything else manually.

do you still feel I should not use devm* interfaces here?
>
>> +
>> + return 0;
>> +}
>> +
>> +static const struct of_device_id sun4i_ps2_match[] = {
>> + { .compatible = "allwinner,sun4i-a10-ps2", },
>> + { },
>> +};
>> +
>> +MODULE_DEVICE_TABLE(of, sun4i_ps2_match);
>> +
>> +static struct platform_driver sun4i_ps2_driver = {
>> + .probe = sun4i_ps2_probe,
>> + .remove = sun4i_ps2_remove,
>> + .driver = {
>> + .name = DRIVER_NAME,
>> + .of_match_table = sun4i_ps2_match,
>> + },
>> +};
>> +module_platform_driver(sun4i_ps2_driver);
>> +
>> +MODULE_AUTHOR("Vishnu Patekar <vishnupatekar0510@gmail.com>");
>> +MODULE_AUTHOR("Aaron.maoye <leafy.myeh@newbietech.com>");
>> +MODULE_DESCRIPTION("Allwinner A10/Sun4i PS/2 driver");
>> +MODULE_LICENSE("GPL v2");
>> --
>> 1.7.9.5
>>
>
> Thanks.
>
> --
> Dmitry


\
 
 \ /
  Last update: 2015-01-19 07:21    [W:0.141 / U:0.864 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site