Messages in this thread Patch in this message | | | From | Bart Tanghe <> | Subject | [PATCH v4] ARM: dts: add bcm2835-pwm bindings | Date | Thu, 15 Jan 2015 13:33:10 +0100 |
| |
To probe the bcm2835-pwm driver properly, this dts bindings has to be added to the bcm2835 dtsi file. In expectation of a bcm2835 clock driver, I've added fixed-clock clock binding. --- Changes in v4: - node added by reg value
Signed-off-by: Bart Tanghe <bart.tanghe@thomasmore.be> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 3342cb1..e8a0f13 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -122,6 +123,14 @@ status = "disabled"; }; + pwm: pwm@7e20c000 { + compatible = "brcm,bcm2835-pwm"; + reg = <0x7e20c000 0x28>; + clocks = <&clk_pwm>; + #pwm-cells = <2>; + status = "disabled"; + }; + sdhci: sdhci@7e300000 { compatible = "brcm,bcm2835-sdhci"; reg = <0x7e300000 0x100>; @@ -179,5 +188,13 @@ clock-output-names = "spi"; clock-frequency = <250000000>; }; + + clk_pwm: clock@3 { + compatible = "fixed-clock"; + reg = <3>; + #clock-cells = <0>; + clock-output-names = "pwm"; + clock-frequency = <9200000>; + }; }; };
| |