lkml.org 
[lkml]   [2015]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v8 11/11] xfstests: fsx: Add fallocate insert range operation
On Thu, Jan 15, 2015 at 07:14:11PM +0900, Namjae Jeon wrote:
>
> > > }
> > > do_collapse_range(offset, size);
> > > break;
> > > + case OP_INSERT_RANGE:
> > > + TRIM_OFF(offset, file_size);
> > > + TRIM_LEN(offset, size, maxfilelen - file_size);
> >
> > Ugh, I hit a crash down in do_insert_range() due to the memset() on
> > good_buf going off the end of the buffer. It looks like the TRIM_LEN()
> > here is not correct and can result in a really large length value.
> >
> > Perhaps something like TRIM_LEN(file_size, length, maxfilelen) is what
> > we want for insert range ops?
> Hi Brian,
> Oops, Sorry about that.
> And your change is correct.
>
> Could you review the below updated patch ?
>

This one looks good. Also, I ran overnight with the same change and it
went for 23m ops. Not sure why it ended up stopping as the output files
compare fine. I'll get it running on another box and see if I can
repeat.

Reviewed-by: Brian Foster <bfoster@redhat.com>

> Thanks!
>
> ------------------------------------------------------------------------------
> Subject: [PATCH v9 11/11] xfstests: fsx: Add fallocate insert range operation
>
> This commit adds fallocate FALLOC_FL_INSERT_RANGE support for fsx.
>
> Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
> Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
> ---
> ltp/fsx.c | 124 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----
> 1 files changed, 114 insertions(+), 10 deletions(-)
>
> diff --git a/ltp/fsx.c b/ltp/fsx.c
> index 3709419..9fed5b2 100644
> --- a/ltp/fsx.c
> +++ b/ltp/fsx.c
> @@ -95,7 +95,8 @@ int logcount = 0; /* total ops */
> #define OP_PUNCH_HOLE 6
> #define OP_ZERO_RANGE 7
> #define OP_COLLAPSE_RANGE 8
> -#define OP_MAX_FULL 9
> +#define OP_INSERT_RANGE 9
> +#define OP_MAX_FULL 10
>
> /* operation modifiers */
> #define OP_CLOSEOPEN 100
> @@ -145,6 +146,7 @@ int fallocate_calls = 1; /* -F flag disables */
> int punch_hole_calls = 1; /* -H flag disables */
> int zero_range_calls = 1; /* -z flag disables */
> int collapse_range_calls = 1; /* -C flag disables */
> +int insert_range_calls = 1; /* -i flag disables */
> int mapped_reads = 1; /* -R flag disables it */
> int fsxgoodfd = 0;
> int o_direct; /* -Z */
> @@ -339,6 +341,14 @@ logdump(void)
> lp->args[0] + lp->args[1])
> prt("\t******CCCC");
> break;
> + case OP_INSERT_RANGE:
> + prt("INSERT 0x%x thru 0x%x\t(0x%x bytes)",
> + lp->args[0], lp->args[0] + lp->args[1] - 1,
> + lp->args[1]);
> + if (badoff >= lp->args[0] && badoff <
> + lp->args[0] + lp->args[1])
> + prt("\t******CCCC");
> + break;
> case OP_SKIPPED:
> prt("SKIPPED (no operation)");
> break;
> @@ -1012,6 +1022,59 @@ do_collapse_range(unsigned offset, unsigned length)
> }
> #endif
>
> +#ifdef FALLOC_FL_INSERT_RANGE
> +void
> +do_insert_range(unsigned offset, unsigned length)
> +{
> + unsigned end_offset;
> + int mode = FALLOC_FL_INSERT_RANGE;
> +
> + if (length == 0) {
> + if (!quiet && testcalls > simulatedopcount)
> + prt("skipping zero length insert range\n");
> + log4(OP_SKIPPED, OP_INSERT_RANGE, offset, length);
> + return;
> + }
> +
> + if ((loff_t)offset >= file_size) {
> + if (!quiet && testcalls > simulatedopcount)
> + prt("skipping insert range behind EOF\n");
> + log4(OP_SKIPPED, OP_INSERT_RANGE, offset, length);
> + return;
> + }
> +
> + log4(OP_INSERT_RANGE, offset, length, 0);
> +
> + if (testcalls <= simulatedopcount)
> + return;
> +
> + end_offset = offset + length;
> + if ((progressinterval && testcalls % progressinterval == 0) ||
> + (debug && (monitorstart == -1 || monitorend == -1 ||
> + end_offset <= monitorend))) {
> + prt("%lu insert\tfrom 0x%x to 0x%x, (0x%x bytes)\n", testcalls,
> + offset, offset+length, length);
> + }
> + if (fallocate(fd, mode, (loff_t)offset, (loff_t)length) == -1) {
> + prt("insert range: %x to %x\n", offset, length);
> + prterr("do_insert_range: fallocate");
> + report_failure(161);
> + }
> +
> + memmove(good_buf + end_offset, good_buf + offset,
> + file_size - offset);
> + memset(good_buf + offset, '\0', length);
> + file_size += length;
> +}
> +
> +#else
> +void
> +do_insert_range(unsigned offset, unsigned length)
> +{
> + return;
> +}
> +#endif
> +
> #ifdef HAVE_LINUX_FALLOC_H
> /* fallocate is basically a no-op unless extending, then a lot like a truncate */
> void
> @@ -1117,14 +1180,25 @@ docloseopen(void)
> }
> }
>
> -#define TRIM_OFF_LEN(off, len, size) \
> -do { \
> - if (size) \
> - (off) %= (size); \
> - else \
> - (off) = 0; \
> - if ((off) + (len) > (size)) \
> - (len) = (size) - (off); \
> +
> +#define TRIM_OFF(off, size) \
> +do { \
> + if (size) \
> + (off) %= (size); \
> + else \
> + (off) = 0; \
> +} while (0)
> +
> +#define TRIM_LEN(off, len, size) \
> +do { \
> + if ((off) + (len) > (size)) \
> + (len) = (size) - (off); \
> +} while (0)
> +
> +#define TRIM_OFF_LEN(off, len, size) \
> +do { \
> + TRIM_OFF(off, size); \
> + TRIM_LEN(off, len, size); \
> } while (0)
>
> void
> @@ -1192,6 +1266,12 @@ test(void)
> goto out;
> }
> break;
> + case OP_INSERT_RANGE:
> + if (!insert_range_calls) {
> + log4(OP_SKIPPED, OP_INSERT_RANGE, offset, size);
> + goto out;
> + }
> + break;
> }
>
> switch (op) {
> @@ -1244,6 +1324,22 @@ test(void)
> }
> do_collapse_range(offset, size);
> break;
> + case OP_INSERT_RANGE:
> + TRIM_OFF(offset, file_size);
> + TRIM_LEN(file_size, size, maxfilelen);
> + offset = offset & ~(block_size - 1);
> + size = size & ~(block_size - 1);
> + if (size == 0) {
> + log4(OP_SKIPPED, OP_INSERT_RANGE, offset, size);
> + goto out;
> + }
> + if (file_size + size > maxfilelen) {
> + log4(OP_SKIPPED, OP_INSERT_RANGE, offset, size);
> + goto out;
> + }
> +
> + do_insert_range(offset, size);
> + break;
> default:
> prterr("test: unknown operation");
> report_failure(42);
> @@ -1307,6 +1403,9 @@ usage(void)
> #ifdef FALLOC_FL_COLLAPSE_RANGE
> " -C: Do not use collapse range calls\n"
> #endif
> +#ifdef FALLOC_FL_INSERT_RANGE
> +" -i: Do not use insert range calls\n"
> +#endif
> " -L: fsxLite - no file creations & no file size changes\n\
> -N numops: total # operations to do (default infinity)\n\
> -O: use oplen (see -o flag) for every op (default random)\n\
> @@ -1493,7 +1592,7 @@ main(int argc, char **argv)
>
> setvbuf(stdout, (char *)0, _IOLBF, 0); /* line buffered stdout */
>
> - while ((ch = getopt(argc, argv, "b:c:dfl:m:no:p:qr:s:t:w:xyAD:FHzCLN:OP:RS:WZ"))
> + while ((ch = getopt(argc, argv, "b:c:dfl:m:no:p:qr:s:t:w:xyAD:FHzCiLN:OP:RS:WZ"))
> != EOF)
> switch (ch) {
> case 'b':
> @@ -1599,6 +1698,9 @@ main(int argc, char **argv)
> case 'C':
> collapse_range_calls = 0;
> break;
> + case 'i':
> + insert_range_calls = 0;
> + break;
> case 'L':
> lite = 1;
> break;
> @@ -1758,6 +1860,8 @@ main(int argc, char **argv)
> zero_range_calls = test_fallocate(FALLOC_FL_ZERO_RANGE);
> if (collapse_range_calls)
> collapse_range_calls = test_fallocate(FALLOC_FL_COLLAPSE_RANGE);
> + if (insert_range_calls)
> + insert_range_calls = test_fallocate(FALLOC_FL_INSERT_RANGE);
>
> while (numops == -1 || numops--)
> test();
> --
> 1.7.7
>
>
>


\
 
 \ /
  Last update: 2015-01-15 13:41    [W:0.061 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site