Messages in this thread | | | Date | Wed, 14 Jan 2015 20:08:09 +0100 | From | Boris Brezillon <> | Subject | Re: [PATCH v2 2/5] irqchip: Add DT binding doc for dumb demuxer chips |
| |
Hi Jason,
On Wed, 14 Jan 2015 13:56:19 -0500 Jason Cooper <jason@lakedaemon.net> wrote:
> Hey Boris, > > On Tue, Jan 13, 2015 at 09:52:07PM +0100, Boris Brezillon wrote: > > On Tue, 13 Jan 2015 14:00:50 -0500 Jason Cooper <jason@lakedaemon.net> wrote: > > > On Tue, Jan 13, 2015 at 07:46:18PM +0100, Boris Brezillon wrote: > > > > Add documentation for the dumb demuxer. > > > > > > > > Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> > > > > --- > > > > .../bindings/interrupt-controller/dumb-demux.txt | 34 ++++++++++++++++++++++ > > > > 1 file changed, 34 insertions(+) > > > > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/dumb-demux.txt > > > > > > > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/dumb-demux.txt b/Documentation/devicetree/bindings/interrupt-controller/dumb-demux.txt > > > > new file mode 100644 > > > > index 0000000..1c777ef > > > > --- /dev/null > > > > +++ b/Documentation/devicetree/bindings/interrupt-controller/dumb-demux.txt > > > > @@ -0,0 +1,34 @@ > > > > +* Generic Dumb Interrupt Demultiplexer > > > > + > > > > +This Dumb demultiplixer simply forward all incoming interrupts to its > > > > +enabled/unmasked children. > > > > > > Please forgive the potentially naïve question, but what hardware is this > > > describing? > > > > That's not a real hardware per se, but on some hardware (like at91 SoCs) > > some IRQ line are shared by several peripherals, and this dumb > > demultiplex is here to represent such shared irq lines which cannot be > > easily demultiplexed (because they do not provide a 'cause' > > register). > > > > You can see it as a virtual irqchip provided to address broken hardware > > designs. > > Hmm. Well, given tglx's recent reply, I suppose I'll *not* go down the > rabbit hole of "the DT is for describing hardware." :-P
Actually I'm a bit surprised no one else already mentioned that :-) (I thought this would be the first complain regarding this dumb irq demux chip).
Anyway, IMHO, this can be considered as hardware description since these irq-lines are really multiplexed into a single one...
> > However, it would probably be a lot more palatable to the DT maintainers > if we at least change the compatible to prepend "linux,". This way, if > someone does come up with a better solution down the road, it will be > much easier to deprecate the binding. > > I would also be amenable to "virt,", or "hack,", or even > "work-around-piss-poor-hw,". Basically, anything that would indicate to > consumers of the DT that this is not a true reflection of the hardware, > and that it may be superseded by a better solution later.
Actually I thought about changing it to "virtual,dumb-irq-demux" :-).
> > It would also be helpful to explain the situation more fully in the > binding document.
Sure, I'll add a few lines to describe what this irqchip really is.
Regards,
Boris
-- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
| |