lkml.org 
[lkml]   [2015]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 03/12] mfd: syscon: Add atmel-smc registers definition
Date
From: Boris Brezillon <boris.brezillon@free-electrons.com>

Atmel AT91 SoCs have a memory range reserved for SMC (Static Memory
Controller) configuration.
Expose those registers so that drivers can make use of the smc syscon
declared in at91 DTs.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
include/linux/mfd/syscon/atmel-smc.h | 173 +++++++++++++++++++++++++++++++++++
1 file changed, 173 insertions(+)
create mode 100644 include/linux/mfd/syscon/atmel-smc.h

diff --git a/include/linux/mfd/syscon/atmel-smc.h b/include/linux/mfd/syscon/atmel-smc.h
new file mode 100644
index 000000000000..be6ebe64eebe
--- /dev/null
+++ b/include/linux/mfd/syscon/atmel-smc.h
@@ -0,0 +1,173 @@
+/*
+ * Atmel SMC (Static Memory Controller) register offsets and bit definitions.
+ *
+ * Copyright (C) 2014 Atmel
+ * Copyright (C) 2014 Free Electrons
+ *
+ * Author: Boris Brezillon <boris.brezillon@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _LINUX_MFD_SYSCON_ATMEL_SMC_H_
+#define _LINUX_MFD_SYSCON_ATMEL_SMC_H_
+
+#include <linux/kernel.h>
+#include <linux/regmap.h>
+
+#define AT91SAM9_SMC_GENERIC 0x00
+#define AT91SAM9_SMC_GENERIC_BLK_SZ 0x10
+
+#define SAMA5_SMC_GENERIC 0x600
+#define SAMA5_SMC_GENERIC_BLK_SZ 0x14
+
+#define AT91SAM9_SMC_SETUP(o) ((o) + 0x00)
+#define AT91SAM9_SMC_NWESETUP(x) (x)
+#define AT91SAM9_SMC_NCS_WRSETUP(x) ((x) << 8)
+#define AT91SAM9_SMC_NRDSETUP(x) ((x) << 16)
+#define AT91SAM9_SMC_NCS_NRDSETUP(x) ((x) << 24)
+
+#define AT91SAM9_SMC_PULSE(o) ((o) + 0x04)
+#define AT91SAM9_SMC_NWEPULSE(x) (x)
+#define AT91SAM9_SMC_NCS_WRPULSE(x) ((x) << 8)
+#define AT91SAM9_SMC_NRDPULSE(x) ((x) << 16)
+#define AT91SAM9_SMC_NCS_NRDPULSE(x) ((x) << 24)
+
+#define AT91SAM9_SMC_CYCLE(o) ((o) + 0x08)
+#define AT91SAM9_SMC_NWECYCLE(x) (x)
+#define AT91SAM9_SMC_NRDCYCLE(x) ((x) << 16)
+
+#define AT91SAM9_SMC_MODE(o) ((o) + 0x0c)
+#define SAMA5_SMC_MODE(o) ((o) + 0x10)
+#define AT91_SMC_READMODE BIT(0)
+#define AT91_SMC_READMODE_NCS (0 << 0)
+#define AT91_SMC_READMODE_NRD (1 << 0)
+#define AT91_SMC_WRITEMODE BIT(1)
+#define AT91_SMC_WRITEMODE_NCS (0 << 1)
+#define AT91_SMC_WRITEMODE_NWE (1 << 1)
+#define AT91_SMC_EXNWMODE GENMASK(5, 4)
+#define AT91_SMC_EXNWMODE_DISABLE (0 << 4)
+#define AT91_SMC_EXNWMODE_FROZEN (2 << 4)
+#define AT91_SMC_EXNWMODE_READY (3 << 4)
+#define AT91_SMC_BAT BIT(8)
+#define AT91_SMC_BAT_SELECT (0 << 8)
+#define AT91_SMC_BAT_WRITE (1 << 8)
+#define AT91_SMC_DBW GENMASK(13, 12)
+#define AT91_SMC_DBW_8 (0 << 12)
+#define AT91_SMC_DBW_16 (1 << 12)
+#define AT91_SMC_DBW_32 (2 << 12)
+#define AT91_SMC_TDF GENMASK(19, 16)
+#define AT91_SMC_TDF_(x) ((((x) - 1) << 16) & AT91_SMC_TDF)
+#define AT91_SMC_TDF_MAX 16
+#define AT91_SMC_TDFMODE_OPTIMIZED BIT(20)
+#define AT91_SMC_PMEN BIT(24)
+#define AT91_SMC_PS GENMASK(29, 28)
+#define AT91_SMC_PS_4 (0 << 28)
+#define AT91_SMC_PS_8 (1 << 28)
+#define AT91_SMC_PS_16 (2 << 28)
+#define AT91_SMC_PS_32 (3 << 28)
+
+
+/*
+ * This function converts a setup timing expressed in nanoseconds into an
+ * encoded value that can be written in the SMC_SETUP register.
+ *
+ * The following formula is described in atmel datasheets (section
+ * "SMC Setup Register"):
+ *
+ * setup length = (128* SETUP[5] + SETUP[4:0])
+ *
+ * where setup length is the timing expressed in cycles.
+ */
+static inline u32 at91sam9_smc_setup_ns_to_cycles(unsigned int clk_rate,
+ u32 timing_ns)
+{
+ u32 clk_period = DIV_ROUND_UP(NSEC_PER_SEC, clk_rate);
+ u32 coded_cycles = 0;
+ u32 cycles;
+
+ cycles = DIV_ROUND_UP(timing_ns, clk_period);
+ if (cycles / 32) {
+ coded_cycles |= 1 << 5;
+ if (cycles < 128)
+ cycles = 0;
+ }
+
+ coded_cycles |= cycles % 32;
+
+ return coded_cycles;
+}
+
+/*
+ * This function converts a pulse timing expressed in nanoseconds into an
+ * encoded value that can be written in the SMC_PULSE register.
+ *
+ * The following formula is described in atmel datasheets (section
+ * "SMC Pulse Register"):
+ *
+ * pulse length = (256* PULSE[6] + PULSE[5:0])
+ *
+ * where pulse length is the timing expressed in cycles.
+ */
+static inline u32 at91sam9_smc_pulse_ns_to_cycles(unsigned int clk_rate,
+ u32 timing_ns)
+{
+ u32 clk_period = DIV_ROUND_UP(NSEC_PER_SEC, clk_rate);
+ u32 coded_cycles = 0;
+ u32 cycles;
+
+ cycles = DIV_ROUND_UP(timing_ns, clk_period);
+ if (cycles / 64) {
+ coded_cycles |= 1 << 6;
+ if (cycles < 256)
+ cycles = 0;
+ }
+
+ coded_cycles |= cycles % 64;
+
+ return coded_cycles;
+}
+
+/*
+ * This function converts a cycle timing expressed in nanoseconds into an
+ * encoded value that can be written in the SMC_CYCLE register.
+ *
+ * The following formula is described in atmel datasheets (section
+ * "SMC Cycle Register"):
+ *
+ * cycle length = (CYCLE[8:7]*256 + CYCLE[6:0])
+ *
+ * where cycle length is the timing expressed in cycles.
+ */
+static inline u32 at91sam9_smc_cycle_ns_to_cycles(unsigned int clk_rate,
+ u32 timing_ns)
+{
+ u32 clk_period = DIV_ROUND_UP(NSEC_PER_SEC, clk_rate);
+ u32 coded_cycles = 0;
+ u32 cycles;
+
+ cycles = DIV_ROUND_UP(timing_ns, clk_period);
+ if (cycles / 128) {
+ coded_cycles = cycles / 256;
+ cycles %= 256;
+ if (cycles >= 128) {
+ coded_cycles++;
+ cycles = 0;
+ }
+
+ if (coded_cycles > 0x3) {
+ coded_cycles = 0x3;
+ cycles = 0x7f;
+ }
+
+ coded_cycles <<= 7;
+ }
+
+ coded_cycles |= cycles % 128;
+
+ return coded_cycles;
+}
+
+#endif /* _LINUX_MFD_SYSCON_ATMEL_SMC_H_ */
--
2.1.0


\
 
 \ /
  Last update: 2015-01-14 18:01    [W:1.353 / U:0.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site