lkml.org 
[lkml]   [2015]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [Linaro-acpi] [PATCH 2/2] ata: ahci_platform: Add ACPI _CLS matching
Date
On Fri, 19 Dec 2014 14:13:08 -0600
, Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
wrote:
> This patch adds ACPI supports for AHCI platform driver, which uses _CLS
> method to match the device.
>
> The following is an example of ASL structure in DSDT for a SATA controller,
> which contains _CLS package to be matched by the ahci_platform driver:
>
> Device (AHC0) // AHCI Controller
> {
> Name(_HID, "AMDI0600")
> Name (_CCA, 1)
> Name (_CLS, Package (3)
> {
> 0x01, // Base Class: Mass Storage
> 0x06, // Sub-Class: serial ATA
> 0x01, // Interface: AHCI
> })
> Name (_CRS, ResourceTemplate ()
> {
> Memory32Fixed (ReadWrite, 0xE0300000, 0x00010000)
> Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive,,,) { 387 }
> })
> }
>
> Also, since ATA driver should not require PCI support for ATA_ACPI,
> this patch removes dependency in the driver/ata/Kconfig.
>
> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>

Looks good to me.

Reviewed-by: Grant Likely <grant.likely@linaro.org>

> ---
> drivers/ata/Kconfig | 2 +-
> drivers/ata/ahci_platform.c | 3 +++
> 2 files changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> index cd4cccb..edb00c6 100644
> --- a/drivers/ata/Kconfig
> +++ b/drivers/ata/Kconfig
> @@ -48,7 +48,7 @@ config ATA_VERBOSE_ERROR
>
> config ATA_ACPI
> bool "ATA ACPI Support"
> - depends on ACPI && PCI
> + depends on ACPI
> default y
> help
> This option adds support for ATA-related ACPI objects.
> diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
> index 06f1d59..4879f9b 100644
> --- a/drivers/ata/ahci_platform.c
> +++ b/drivers/ata/ahci_platform.c
> @@ -71,6 +71,8 @@ static const struct of_device_id ahci_of_match[] = {
> };
> MODULE_DEVICE_TABLE(of, ahci_of_match);
>
> +static const struct acpi_device_cls ahci_cls = {0x01, 0x06, 0x01};
> +
> static struct platform_driver ahci_driver = {
> .probe = ahci_probe,
> .remove = ata_platform_remove_one,
> @@ -78,6 +80,7 @@ static struct platform_driver ahci_driver = {
> .name = "ahci",
> .owner = THIS_MODULE,
> .of_match_table = ahci_of_match,
> + .acpi_cls = &ahci_cls,
> .pm = &ahci_pm_ops,
> },
> };
> --
> 1.9.3
>
>
> _______________________________________________
> Linaro-acpi mailing list
> Linaro-acpi@lists.linaro.org
> http://lists.linaro.org/mailman/listinfo/linaro-acpi



\
 
 \ /
  Last update: 2015-01-14 17:21    [W:1.968 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site