lkml.org 
[lkml]   [2015]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: SATA link power management issues
Date
On Tuesday 13 January 2015 02:17:00 Suman Tripathi wrote:
> Hi,
>
> On Tuesday 13 January 2015 02:00:45 Suman Tripathi wrote:
> > On Monday 12 January 2015 22:46:02 Suman Tripathi wrote:
> > > Can you dump the ata_id parameters(LPM section) from the drive and we
> > > can check the related LPM parameters of the drive ?
> >
> > Hi,
> >
> > I'm sorry, but I'm not really familiar with ata, could you be a bit
> > more specific about what you'd like to see?
> > ok no issues. First can show the log from the point the drive got
> > enumerated ? Like for eg :
> > ata2.00: ATA-8: WDC WD5000AAKX-08U6AA0, 19.01H19, max UDMA/100
> >
> > ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
> >
> > ata2.00: configured for UDMA/100
> >
> > I would like to the ATA version the drive is complaint. In the above case
> > it is ATA-8
>
> [ 0.698842] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [ 0.701419] ata3.00: ATA-8: LITEONIT LMT-256M6M mSATA 256GB, DM8110F,
> max UDMA/133
> [ 0.701421] ata3.00: 500118192 sectors, multi 1: LBA48 NCQ (depth
> 31/32), AA
> [ 0.701982] ata3.00: configured for UDMA/133
>
> You can see the entire log here:
> http://www.spinics.net/lists/linux-ide/msg50069.html
>
> Can you try the below fix ? In the libata-core.c

Tried, unfortunately it does not solve the problem. I no longer get
"ahci 0000:00:1f.2: port does not support device sleep"

[ 60.170199] ata3.00: exception Emask 0x10 SAct 0x2000 SErr 0x50000 action 0xe frozen
[ 60.170209] ata3.00: irq_stat 0x00400000, PHY RDY changed
[ 60.170215] ata3: SError: { PHYRdyChg CommWake }
[ 60.170221] ata3.00: failed command: WRITE FPDMA QUEUED
[ 60.170231] ata3.00: cmd 61/01:68:01:08:00/00:00:00:00:00/40 tag 13 ncq 512 out
res 40/00:6c:01:08:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 60.170236] ata3.00: status: { DRDY }
[ 60.170244] ata3: hard resetting link
[ 60.894728] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 60.897672] ata3.00: configured for UDMA/133
[ 60.910690] ata3: EH complete


\
 
 \ /
  Last update: 2015-01-12 22:01    [W:0.076 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site