lkml.org 
[lkml]   [2015]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 0/3] power: rt5033: Add Richtek RT533 drivers
From
Date
[s/lee.jone@linaro.org/lee.jones@linaro.org]

On Mon, 2015-01-12 at 11:40 +0100, Paul Bolle wrote:
> Beomho,
>
> On Fri, 2015-01-09 at 17:45 +0900, Beomho Seo wrote:
> > This patchset adds driver for Richtek rt5033 chip The chip contains
> > switching charge mode Li-Ion/Li-Polymer battery charger, fuelgauge.
> > Additionally, This includes document for device tree of RT5033 device.
> >
> > RT5033 core driver is applied by Lee Jones.
> > RT5033 regulator driver have been merged by Mark Brown. commit is below,
> >
> > commit b1917578fd5d8efa67afa05a0d6d7e323f2802da
> >
> > Changes in v2:
> > - Revise binding documentation..
> >
> > Beomho Seo (3):
> > power: rt5033_battery: Add RT5033 Fuel gauge device driver
> > power: rt5033_charger: Add RT5033 charger device driver
> > Documentation: Add documentation for rt5033 multifunction device
> >
> > Documentation/devicetree/bindings/mfd/rt5033.txt | 101 ++++
> > .../devicetree/bindings/vendor-prefixes.txt | 1 +
> > drivers/power/Kconfig | 16 +
> > drivers/power/Makefile | 2 +
> > drivers/power/rt5033_battery.c | 177 +++++++
> > drivers/power/rt5033_charger.c | 485 ++++++++++++++++++++
> > 6 files changed, 782 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/mfd/rt5033.txt
> > create mode 100644 drivers/power/rt5033_battery.c
> > create mode 100644 drivers/power/rt5033_charger.c
>
> This series adds two drivers that depend on MFD_RT5033. But there's
> currently no Kconfig symbol MFD_RT5033.
>
> The regulator driver mentioned above is another driver that depends on
> MFD_RT5033. It was included first in next-20141117. It is also included
> in mainline since v3.19-rc1. That regulator driver has never been
> buildable, even if one bypasses its dependency on MFD_RT5033. That is
> because it includes two headers that are not yet part of the tree
> (linux/mfd/rt5033.h and linux/mfd/rt5033-private.h).
>
> When is the Kconfig symbol MFD_RT5033 expected to be included in the
> tree?
>
>
> Paul Bolle




\
 
 \ /
  Last update: 2015-01-12 12:01    [W:0.087 / U:0.628 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site