lkml.org 
[lkml]   [2014]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] iio: vadc: Qualcomm SPMI PMIC voltage ADC driver
On 09/09/2014 01:32 PM, Arnd Bergmann wrote:
> On Monday 08 September 2014 18:30:00 Stanimir Varbanov wrote:
>>>>> These numbers all look hardware specific, so why put macros into the
>>>>> device tree rather than using them directly?
>>>>
>>>> The idea was to use #defines in DT nodes when we need to overwrite the
>>>> adc channel parameters, see example in 2/2 how it will be used.
>>>
>>> I don't understand. The node in the example has
>>>
>>> + /* Channel node */
>>> + usb_id_nopull@39 {
>>> + qcom,channel = <VADC_LR_MUX10_USB_ID>;
>>> ...
>>> + };
>>>
>>>
>>> And VADC_LR_MUX10_USB_ID is defined to 0x39. How is this helping anything?
>>> You just introduce an artificial dependency on the header file, which makes
>>> it a mess to merge the patches or do updates, and anybody who needs to
>>> make updates to this now has to go through the same pain, to update the
>>> dts files, the driver and the binding document in lockstep.
>>>
>>> Why not remove the qcom,channel property completely and use a 'reg'
>>> property with #address-cells=<1>, #size-cells=<0> and put the number
>>> directly in there, with no need for obfuscation macros?
>>
>> OK thanks for the remarks. I will fix this mess.
>>
>> I hope you are expecting to see this:
>>
>> pmic_vadc: vadc@3100 {
>> #address-cells = <1>;
>> #size-cells = <0>;
>> #io-channel-cells = <1>;
>> io-channel-ranges;
>>
>> usb_id_nopull@39 {
>> reg = <0x39>;
>> };
>> };
>>
>> and use the vadc channel from usb device node
>>
>> usb {
>> ...
>> io-channels = <&pmic_vadc 0x39>;
>> io-channel-names = "usbidnopull";
>> };
>
> The ID stuff looks good now, but I had not noticed the
> "io-channel-names" property before. I think you misunderstood
> the purpose of that, because it is very similar to the name of the
> adc provider (usb_id_nopull@39).
>
> Like anything else that we refer to by name (interrupt, reg,
> clock, regulator, ...), the name used in the client is supposed
> to be a string that identifies what the connection means to the
> client, not what it means to the provider. This string is
> supposed to be defined in the binding of the client device and
> independent of what other hardware block provides it.

yes of course, my fault. Thanks for clarification.

--
regards,
Stan


\
 
 \ /
  Last update: 2014-09-09 15:21    [W:0.079 / U:0.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site