lkml.org 
[lkml]   [2014]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] ARM: dts: Add SPI nodes to rk3288
Date
Am Freitag, 5. September 2014, 09:53:11 schrieb Doug Anderson:
> From: huang lin <hl@rock-chips.com>
>
> This adds basic SPI nodes to the base rk3288 device tree file.
>
> A few notes:
> * It's assumed that most users of the SPI ports are using chip select
> 0. Thus the default pinctrl for the ports enables chip select 0
> (but not chip select 1 on ports that have it). If a board wants to
> use chip select 1 or wants a GPIO chip select the board should
> override the pinctrl (just like boards can override UART pinctrl if
> they have hardware flow control).
> * Since SPI DMA support appears broken and the SPI works fine without
> DMA we don't include the DMA references. That can come in a later
> change.

Added to my dts branch with the one small change described below


>
> Signed-off-by: huang lin <hl@rock-chips.com>
> Signed-off-by: Doug Anderson <dianders@chromium.org>
> ---
>
> arch/arm/boot/dts/rk3288.dtsi | 92
> +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 92
> insertions(+)
>
> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
> index 5f866e0..75d1f4c 100644
> --- a/arch/arm/boot/dts/rk3288.dtsi
> +++ b/arch/arm/boot/dts/rk3288.dtsi
> @@ -34,6 +34,9 @@
> serial2 = &uart2;
> serial3 = &uart3;
> serial4 = &uart4;
> + spi0 = &spi0;
> + spi1 = &spi1;
> + spi2 = &spi2;
> };
>
> cpus {
> @@ -128,6 +131,45 @@
> status = "disabled";
> };
>
> + spi0: spi@ff110000 {
> + compatible = "rockchip,rk3066-spi";

I've changed the compatibles to the one defined in the binding, aka
"rockchip,rk3288-spi", "rockchip,rk3066-spi"


> + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
> + clock-names = "spiclk", "apb_pclk";
> + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
> + reg = <0xff110000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi1: spi@ff120000 {
> + compatible = "rockchip,rk3066-spi";
> + clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
> + clock-names = "spiclk", "apb_pclk";
> + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
> + reg = <0xff120000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi2: spi@ff130000 {
> + compatible = "rockchip,rk3066-spi";
> + clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
> + clock-names = "spiclk", "apb_pclk";
> + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
> + reg = <0xff130000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> i2c1: i2c@ff140000 {
> compatible = "rockchip,rk3288-i2c";
> reg = <0xff140000 0x1000>;
> @@ -700,6 +742,56 @@
> };
> };
>
> + spi0 {
> + spi0_clk: spi0-clk {
> + rockchip,pins = <5 12 RK_FUNC_1 &pcfg_pull_up>;
> + };
> + spi0_cs0: spi0-cs0 {
> + rockchip,pins = <5 13 RK_FUNC_1 &pcfg_pull_up>;
> + };
> + spi0_tx: spi0-tx {
> + rockchip,pins = <5 14 RK_FUNC_1 &pcfg_pull_up>;
> + };
> + spi0_rx: spi0-rx {
> + rockchip,pins = <5 15 RK_FUNC_1 &pcfg_pull_up>;
> + };
> + spi0_cs1: spi0-cs1 {
> + rockchip,pins = <5 16 RK_FUNC_1 &pcfg_pull_up>;
> + };
> + };
> + spi1 {
> + spi1_clk: spi1-clk {
> + rockchip,pins = <7 12 RK_FUNC_2 &pcfg_pull_up>;
> + };
> + spi1_cs0: spi1-cs0 {
> + rockchip,pins = <7 13 RK_FUNC_2 &pcfg_pull_up>;
> + };
> + spi1_rx: spi1-rx {
> + rockchip,pins = <7 14 RK_FUNC_2 &pcfg_pull_up>;
> + };
> + spi1_tx: spi1-tx {
> + rockchip,pins = <7 15 RK_FUNC_2 &pcfg_pull_up>;
> + };
> + };
> +
> + spi2 {
> + spi2_cs1: spi2-cs1 {
> + rockchip,pins = <8 3 RK_FUNC_1 &pcfg_pull_up>;
> + };
> + spi2_clk: spi2-clk {
> + rockchip,pins = <8 6 RK_FUNC_1 &pcfg_pull_up>;
> + };
> + spi2_cs0: spi2-cs0 {
> + rockchip,pins = <8 7 RK_FUNC_1 &pcfg_pull_up>;
> + };
> + spi2_rx: spi2-rx {
> + rockchip,pins = <8 8 RK_FUNC_1 &pcfg_pull_up>;
> + };
> + spi2_tx: spi2-tx {
> + rockchip,pins = <8 9 RK_FUNC_1 &pcfg_pull_up>;
> + };
> + };
> +
> uart0 {
> uart0_xfer: uart0-xfer {
> rockchip,pins = <4 16 RK_FUNC_1 &pcfg_pull_up>,



\
 
 \ /
  Last update: 2014-09-09 11:01    [W:0.041 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site