lkml.org 
[lkml]   [2014]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] i2c: rk3x: fix divisor calculation for SCL frequency
> Addy,
>
> On Thu, Sep 4, 2014 at 7:32 PM, Addy Ke <addy.ke@rock-chips.com> wrote:
>> I2C_CLKDIV register descripted in the previous version of
>> RK3x chip manual is incorrect. Plus 1 is required.
>>
>> The correct formula:
>> - T(SCL_HIGH) = T(PCLK) * (CLKDIVH + 1) * 8
>> - T(SCL_LOW) = T(PCLK) * (CLKDIVL + 1) * 8
>> - (SCL Divsor) = 8 * ((CLKDIVL + 1) + (CLKDIVH + 1))
>> - SCL = PCLK / (CLK Divsor)
>
> I'll trust that you tested this with a scope
>
Yes ,I have tested on RK3188 and RK3288, and confirmed by oscilloscope.
>
>> It will be updated to the latest version of chip manual.
>>
>> Signed-off-by: Addy Ke <addy.ke@rock-chips.com>
>> ---
>> drivers/i2c/busses/i2c-rk3x.c | 4 ++--
>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
>> index e637c32..76b6604 100644
>> --- a/drivers/i2c/busses/i2c-rk3x.c
>> +++ b/drivers/i2c/busses/i2c-rk3x.c
>> @@ -433,8 +433,8 @@ static void rk3x_i2c_set_scl_rate(struct rk3x_i2c *i2c, unsigned long scl_rate)
>> unsigned long i2c_rate = clk_get_rate(i2c->clk);
>> unsigned int div;
>>
>> - /* SCL rate = (clk rate) / (8 * DIV) */
>> - div = DIV_ROUND_UP(i2c_rate, scl_rate * 8);
>> + /* SCL rate = (clk rate) / (8 * (DIV + 2)) */
>> + div = DIV_ROUND_UP(i2c_rate, scl_rate * 8) - 2;
>
> Given the bug I just fixed in the Rockchip SPI driver, I was a little
> worried about div becoming -1 (and thus being a really large positive
> number since div is unsigned).
>
> However, it seems that you get saved by the next statement:
> div = DIV_ROUND_UP(div, 2);
>
> In the testing I did with the Linux macros, that magically transformed
> a div of 0xFFFFFFFF (-1) to 0, so it's not technically a bug. ...but
> it's very non-obvious. Can you do something a little cleaner?

The following modifications is reasonable?

static void rk3x_i2c_set_scl_rate(struct rk3x_i2c *i2c, unsigned long scl_rate)
{
unsigned long i2c_rate = clk_get_rate(i2c->clk);
unsigned int div;

/* set DIV = DIVH = DIVL
* SCL rate = (clk rate) / (8 * (DIVH + 1 + DIVL + 1))
* = (clk rate) / (16 * (DIV + 1))
*/
div = DIV_ROUND_UP(i2c_rate, scl_rate * 16) - 1;

i2c_writel(i2c, (div << 16) | (div & 0xffff), REG_CLKDIV);
}
>
> -Doug
>
>
>



\
 
 \ /
  Last update: 2014-09-05 13:01    [W:2.015 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site