lkml.org 
[lkml]   [2014]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/2] gpio: Add driver for AXM55xx SSP chip selects
From
> On Thu, Sep 4, 2014 at 7:06 PM, Mark Brown <broonie@kernel.org> wrote:
>> On Thu, Sep 04, 2014 at 07:04:44PM +0200, Linus Walleij wrote:
>>> I need an ACK from Mark Brown on this before I apply.
>>> The driver seems to do what it should, but I need Mark to
>>> be OK with exporting the CS signals from an SSP/SPI block
>>> to be exposed to Linux as GPIOs.
>>>
>>> (Top-posting and quoting patch verbatim so Mark gets it.)
>>
>> I don't see any sort of reasoning for this?
>
> Maybe there was some earlier, but this is an excellent opportunity
> to repeat it... So Anders: why do you want to do this?
>

Well, the problem with adding this to the spi-pl022 driver (as a
vendor specific extension) is that this IP block unfortunately isn't
distinguishable from the standard ARM PL022 implementation (same
values in the PrimeCell identification registers). That's why I went
down the GPIO path...

/Anders


\
 
 \ /
  Last update: 2014-09-05 11:41    [W:0.091 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site