lkml.org 
[lkml]   [2014]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v2 0/8] phy: miphy28lp: Introduce support for MiPHY28lp
    Date
    Changes in v2:
    from Kishon
    - create a common file for phy
    - cosmetic correction in phy-miphy28lp.txt file
    - change initialization of the registers
    from Srinivas
    - rename and simplify a procedure
    - Add Tx impedance and SSC support for SATA and PCI

    Hi Kishon,

    The goal of this series is to add the support of MiPHY28lp Generic PHY.
    I tried to be as close as possible to the MiPHY365x Lee Jones proposal.

    Best Regards
    Gabriel.

    Gabriel Fernandez (8):
    phy: miphy28lp: Add Device Tree bindings for the MiPHY28lp
    phy: miphy28lp: Add MiPHY28lp header file for DT x Driver defines
    phy: miphy28lp: Provide support for the MiPHY28lp Generic PHY
    ARM: DT: STi: STiH407: Add DT node for MiPHY28lp
    ARM: multi_v7_defconfig: Enable MiPHY28lp - ST's Generic (SATA, PCIe &
    USB3) PHY
    phy: miphy28lp: Add SSC support for SATA
    phy: miphy28lp: Add SSC support for PCIE
    phy: miphy28lp: Tune tx impedance across Soc cuts

    .../devicetree/bindings/phy/phy-miphy28lp.txt | 128 +++
    arch/arm/boot/dts/stih407-b2120.dts | 11 +
    arch/arm/boot/dts/stih407.dtsi | 65 ++
    arch/arm/configs/multi_v7_defconfig | 1 +
    drivers/phy/Kconfig | 8 +
    drivers/phy/Makefile | 1 +
    drivers/phy/phy-miphy28lp.c | 1076 ++++++++++++++++++++
    include/dt-bindings/phy/phy-miphy.h | 12 +
    8 files changed, 1302 insertions(+)
    create mode 100644 Documentation/devicetree/bindings/phy/phy-miphy28lp.txt
    create mode 100644 drivers/phy/phy-miphy28lp.c
    create mode 100644 include/dt-bindings/phy/phy-miphy.h

    --
    1.9.1



    \
     
     \ /
      Last update: 2014-09-03 18:21    [W:3.750 / U:0.016 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site