lkml.org 
[lkml]   [2014]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] DT: add binding for mxs regulator
On Sat, Sep 27, 2014 at 01:59:47AM +0100, Stefan Wahren wrote:
> This patch adds the Device tree bindings for the Freescale MXS
> on-chip regulators.
>
> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
> ---
> .../bindings/regulator/mxs-regulator.txt | 36 ++++++++++++++++++++
> 1 file changed, 36 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/regulator/mxs-regulator.txt
>
> diff --git a/Documentation/devicetree/bindings/regulator/mxs-regulator.txt b/Documentation/devicetree/bindings/regulator/mxs-regulator.txt
> new file mode 100644
> index 0000000..e3133a4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/mxs-regulator.txt
> @@ -0,0 +1,36 @@
> +MXS regulators
> +
> +Required node properties:
> +- compatible: Should be "simple-bus"

This does not look like an appropriate use of simple-bus.

Why do you want the parent node to be a simple-bus?

> +- #address-cells: Number of cells required to define regulator register,
> + must be 1
> +- #size-cells: Number of cells required to define register size, must be 1

Why must this be the case, given that the child node expects an absolute
physical address?

What's wrong with #address-cells = <2>, for example?

> +- reg: Absolute physical address and size of the register set for the device

Why is this here _and_ in the child node(s)?

What is the difference between this node and its children?

Can there be more than one sub-node?

Mark.

> +
> +Required regulator properties:
> +- compatible: Must be "fsl,mxs-regulator"
> +- reg: Absolute physical address of the register set for the regulator
> +
> +Any regulator property defined as part of the core regulator
> +binding, defined in regulator.txt, can also be used.
> +
> +Example:
> +
> + power: power@80044000 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x80044000 0x2000>;
> + ranges;
> +
> + reg_vddd: regulator@80044040 {
> + reg = <0x80044040 0x10>;
> + compatible = "fsl,mxs-regulator";
> + regulator-name = "vddd";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1575000>;
> + regulator-boot-on;
> + vddd-supply = <&reg_vdda>;
> + };
> + };
> +
> --
> 1.7.9.5
>
>


\
 
 \ /
  Last update: 2014-09-29 13:41    [W:0.348 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site