lkml.org 
[lkml]   [2014]   [Sep]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 0/2] Initial support for XPowers AXP288 PMIC
> Can you consider taking this for 3.18 if there are no other issues?

I'm afraid not. Linus is opening the v3.18 merge-window early this
cycle, so I have stopped applying patches. This will be re-considered
for v3.19.

> On Thu, 25 Sep 2014 04:15:39 -0700
> Jacob Pan <jacob.jun.pan@linux.intel.com> wrote:
>
> > X-Powers AXP288 is a customized PMIC found on some Intel Baytrail-CR
> > platforms. It comes with sub-functions such as USB charging, fuel
> > gauge, ADC, and many LDO and BUCK channels.
> >
> > By extending the existing AXP20x driver, this patchset adds basic
> > support for AXP288 PMIC with ADC as one MFD cell device driver.
> >
> > Currently, the PMIC driver in this patchset does not support platform
> > data enumeration. But when ACPI _DSD and unified device properties
> > become available, cell devices with platform data will be added.
> >
> > This patch does not use intel_soc_pmic core for i2c and regmap
> > handling in that axp288 shares similar programming interface with
> > other X-Power PMICs supported in axp20x.c. Therefore, extending
> > axp20x.c to include axp288 makes more sense.
> >
> > Changes
> > v6: - change axp20x_match_device() flow to give more specific
> > error messages.
> > - remove unnecessary cast
> >
> > v5: - excluded iio documentation patch, already applied to
> > iio.git
> > - restructured axp288_adc read_raw code to make it more
> > readable
> > - renamed adc_enable to adc_set_state and add comment about
> > why adc has to be always on and there is no disable function.
> > - axp20x use const as needed for regmap structures
> >
> > v4: - removed rename patch, use Kconfig description to list
> > supported devices
> > - misc clean up in ADC code, use regmap_bulk_read and
> > improve error handling, etc.
> > - remove IIO ADC scale, treat raw data as processed since the
> > unit is already in IIO expected milliamps.
> >
> > v3: - put all file rename changes in 1/5
> > - add iio documentation for in_current_raw/scale
> > - removed global variables in axp2xx
> > - removed pm callbacks from GPADC
> > - removed ACPI opregion cell device
> > - added scales to ADC current and voltage
> > - removed ADC thermal sensor from sysfs, kernel internal use
> > only
> >
> > v2:
> > - use format -M for 1/4
> > - minor tweak based on Maxime's review
> >
> >
> > Jacob Pan (2):
> > mfd/axp20x: extend axp20x to support axp288 pmic
> > iio/adc: add support for axp288 adc
> >
> > drivers/iio/adc/Kconfig | 8 +
> > drivers/iio/adc/Makefile | 1 +
> > drivers/iio/adc/axp288_adc.c | 253 ++++++++++++++++++++++++++++++
> > drivers/mfd/Kconfig | 3 +-
> > drivers/mfd/axp20x.c | 361
> > ++++++++++++++++++++++++++++++++++++-------
> > include/linux/mfd/axp20x.h | 59 +++++++ 6 files changed, 629
> > insertions(+), 56 deletions(-) create mode 100644
> > drivers/iio/adc/axp288_adc.c
> >
>
> [Jacob Pan]

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-09-26 09:41    [W:0.044 / U:0.808 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site