lkml.org 
[lkml]   [2014]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v9 00/10] rtc: at91sam9: add DT support
This is not acceptable.  You have sent a 10 patch patch-set 5 times in
24hrs. To make matters worse, the only patch that has any affiliation
to me has already been accepted.

Send a patch-set to the list and don't do anything until the patch has
either been accepted or the reviews to stop coming in. Then re-send
(only the patches that have not yet been accepted) in a week or so, if
required.

If I have to deal with another 55 repeat emails again, you'll find
yourself as an entry in my spam filter.

> This patch series adds DT support to the atmel at91sam9 RTC driver.
>
> It also removes any machine specific inclusions to prepare the migration
> to multi platform kernel support, and retain the slow clock to prevent
> the CCF from disabling it at the end of boot.
>
> Best Regards,
>
> Boris
>
> Changes since v8:
> - fix DT documentation
> - add missing '\n' in dev_err messages
>
> Changes since v7:
> - fix typo
> - fix sclk_rate test
> - state that RTC_DRV_AT91SAM9_RTT and RTC_DRV_AT91SAM9_GPBR are no longer
> used when booting a DT board
>
> Changes since v6:
> - fix typos
> - add missing commit messages
> - rework the Kconfig description
>
> Changes since v5:
> - replace 'rtc' by 'rtt' where appropriate
> - fix commit messages
>
> Changes since v4:
> - add a TODO comment to remember removing non DT board support code
>
> Changes since v3:
> - add GPBR DT bindings doc
> - fix a coding style issues
> - add Alexandre's Acked-by
> - change RTT DT bindings
>
> Changes since v2:
> - make use of syscon/regmap to avoid directly requesting/mapping a GPBR
> memory region in the RTT driver
>
> Changes since v1:
> - remove non CCF specific case by adding the appropriate clk_lookup
> entries in arch/arm/mach-at91/<soc-name>.c files
>
> Boris BREZILLON (10):
> rtc: at91sam9: remove references to mach specific headers
> rtc: at91sam9: use standard readl/writel functions instead of raw
> versions
> rtc: at91sam9: replace devm_ioremap by devm_ioremap_resource
> rtc: at91sam9: add DT support
> rtc: at91sam9: make use of syscon/regmap to access GPBR registers
> rtc: at91sam9: rework the Kconfig description
> ARM: at91: add clk_lookup entry for RTT devices
> rtc: at91sam9: use clk API instead of relying on AT91_SLOW_CLOCK
> rtc: at91sam9: add DT bindings documentation
> mfd: syscon: add Atmel GPBR DT bindings documention
>
> .../devicetree/bindings/mfd/atmel,gpbr.txt | 15 +++
> .../devicetree/bindings/rtc/atmel,at91sam9-rtc.txt | 23 ++++
> arch/arm/mach-at91/at91sam9260.c | 2 +
> arch/arm/mach-at91/at91sam9261.c | 2 +
> arch/arm/mach-at91/at91sam9263.c | 4 +
> arch/arm/mach-at91/at91sam9g45.c | 2 +
> arch/arm/mach-at91/at91sam9rl.c | 2 +
> arch/arm/mach-at91/clock.c | 2 +-
> arch/arm/mach-at91/clock.h | 1 +
> drivers/rtc/Kconfig | 24 ++--
> drivers/rtc/rtc-at91sam9.c | 138 ++++++++++++++++-----
> 11 files changed, 177 insertions(+), 38 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mfd/atmel,gpbr.txt
> create mode 100644 Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
>

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-09-24 11:21    [W:0.135 / U:0.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site