Messages in this thread | | | From | Chris Zhong <> | Subject | [PATCH v2 0/2] regulator: get voltage & duty table from dts for st-pwm | Date | Thu, 18 Sep 2014 15:31:43 +0800 |
| |
get voltage & duty table from device tree might be better, other platforms can also use this driver without any modify. Tested on a rk3288 sdk board as logic voltage regulator.
Changes in v2: Adviced by Lee Jones - rename the documentation Adviced by Doug Anderson - update the example Adviced by Mark Rutland - remove pwm-reg-period
Chris Zhong (2): regulator: st-pwm: get voltage and duty table from dts dt-bindings: add devicetree bindings for st-pwm regulator
.../bindings/regulator/pwm-regulator.txt | 29 +++ drivers/regulator/Kconfig | 8 +- drivers/regulator/Makefile | 2 +- drivers/regulator/pwm-regulator.c | 195 ++++++++++++++++++++ drivers/regulator/st-pwm.c | 190 ------------------- 5 files changed, 229 insertions(+), 195 deletions(-) create mode 100644 Documentation/devicetree/bindings/regulator/pwm-regulator.txt create mode 100644 drivers/regulator/pwm-regulator.c delete mode 100644 drivers/regulator/st-pwm.c
-- 1.7.9.5
| |