Messages in this thread Patch in this message | | | From | Antoine Tenart <> | Subject | [PATCH v3 3/9] Documentation: bindings: net: add the Marvell PXA168 Ethernet controller | Date | Mon, 15 Sep 2014 16:01:47 +0200 |
| |
This adds the binding documentation for the Marvell PXA168 Ethernet controller, following its DT support.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> --- .../devicetree/bindings/net/marvell-pxa168.txt | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/marvell-pxa168.txt
diff --git a/Documentation/devicetree/bindings/net/marvell-pxa168.txt b/Documentation/devicetree/bindings/net/marvell-pxa168.txt new file mode 100644 index 000000000000..4177abf3dac3 --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell-pxa168.txt @@ -0,0 +1,21 @@ +* Marvell PXA168 Ethernet Controller + +Required properties: +- compatible: should be "marvell,pxa168-eth". +- reg: address and length of the register set for the device. +- interrupts: interrupt for the device. +- clocks: pointer to the clock for the device. + +Optional properties: +- port-id: should be '0','1' or '2'. +- phy-addr: MDIO address of the PHY. +- local-mac-address: see ethernet.txt file in the same directory. + +Example: + + eth0: ethernet@f7b90000 { + compatible = "marvell,pxa168-eth"; + reg = <0xf7b90000 0x10000>; + clocks = <&chip CLKID_GETH0>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + }; -- 1.9.1
| |