lkml.org 
[lkml]   [2014]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net] r8169: adjust __rtl8169_set_features
Date
Remove the "changed" test in __rtl8169_set_features(). Instead, do
simple test in rtl8169_set_features().

Set the RxChkSum and RxVlan through __rtl8169_set_features() in
rtl_open().

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
drivers/net/ethernet/realtek/r8169.c | 74 +++++++++++++++++-------------------
1 file changed, 34 insertions(+), 40 deletions(-)

diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 7a7860a..ef2cee5 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -1783,33 +1783,31 @@ static void __rtl8169_set_features(struct net_device *dev,
netdev_features_t features)
{
struct rtl8169_private *tp = netdev_priv(dev);
- netdev_features_t changed = features ^ dev->features;
void __iomem *ioaddr = tp->mmio_addr;
+ u32 rx_config;

- if (!(changed & (NETIF_F_RXALL | NETIF_F_RXCSUM |
- NETIF_F_HW_VLAN_CTAG_RX)))
- return;
+ rx_config = RTL_R32(RxConfig);
+ if (features & NETIF_F_RXALL)
+ rx_config |= (AcceptErr | AcceptRunt);
+ else
+ rx_config &= ~(AcceptErr | AcceptRunt);

- if (changed & (NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_RX)) {
- if (features & NETIF_F_RXCSUM)
- tp->cp_cmd |= RxChkSum;
- else
- tp->cp_cmd &= ~RxChkSum;
+ RTL_W32(RxConfig, rx_config);

- if (features & NETIF_F_HW_VLAN_CTAG_RX)
- tp->cp_cmd |= RxVlan;
- else
- tp->cp_cmd &= ~RxVlan;
+ if (features & NETIF_F_RXCSUM)
+ tp->cp_cmd |= RxChkSum;
+ else
+ tp->cp_cmd &= ~RxChkSum;

- RTL_W16(CPlusCmd, tp->cp_cmd);
- RTL_R16(CPlusCmd);
- }
- if (changed & NETIF_F_RXALL) {
- int tmp = (RTL_R32(RxConfig) & ~(AcceptErr | AcceptRunt));
- if (features & NETIF_F_RXALL)
- tmp |= (AcceptErr | AcceptRunt);
- RTL_W32(RxConfig, tmp);
- }
+ if (features & NETIF_F_HW_VLAN_CTAG_RX)
+ tp->cp_cmd |= RxVlan;
+ else
+ tp->cp_cmd &= ~RxVlan;
+
+ tp->cp_cmd |= RTL_R16(CPlusCmd) & ~(RxVlan | RxChkSum);
+
+ RTL_W16(CPlusCmd, tp->cp_cmd);
+ RTL_R16(CPlusCmd);
}

static int rtl8169_set_features(struct net_device *dev,
@@ -1817,8 +1815,11 @@ static int rtl8169_set_features(struct net_device *dev,
{
struct rtl8169_private *tp = netdev_priv(dev);

+ features &= NETIF_F_RXALL | NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_RX;
+
rtl_lock_work(tp);
- __rtl8169_set_features(dev, features);
+ if (features ^ dev->features);
+ __rtl8169_set_features(dev, features);
rtl_unlock_work(tp);

return 0;
@@ -6707,12 +6708,7 @@ static int rtl_open(struct net_device *dev)

rtl8169_init_phy(dev, tp);

- if (dev->features & NETIF_F_HW_VLAN_CTAG_RX)
- tp->cp_cmd |= RxVlan;
- else
- tp->cp_cmd &= ~RxVlan;
-
- RTL_W16(CPlusCmd, tp->cp_cmd);
+ __rtl8169_set_features(dev, dev->features);

rtl_pll_power_up(tp);

@@ -7123,8 +7119,7 @@ static void rtl_hw_initialize(struct rtl8169_private *tp)
}
}

-static int
-rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
const struct rtl_cfg_info *cfg = rtl_cfg_infos + ent->driver_data;
const unsigned int region = cfg->region;
@@ -7199,7 +7194,7 @@ rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
goto err_out_mwi_2;
}

- tp->cp_cmd = RxChkSum;
+ tp->cp_cmd = 0;

if ((sizeof(dma_addr_t) > 4) &&
!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) && use_dac) {
@@ -7240,13 +7235,6 @@ rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)

pci_set_master(pdev);

- /*
- * Pretend we are using VLANs; This bypasses a nasty bug where
- * Interrupts stop flowing on high load on 8110SCd controllers.
- */
- if (tp->mac_version == RTL_GIGA_MAC_VER_05)
- tp->cp_cmd |= RxVlan;
-
rtl_init_mdio_ops(tp);
rtl_init_pll_power_ops(tp);
rtl_init_jumbo_ops(tp);
@@ -7307,8 +7295,14 @@ rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO |
NETIF_F_HIGHDMA;

+ tp->cp_cmd |= RxChkSum | RxVlan;
+
+ /*
+ * Pretend we are using VLANs; This bypasses a nasty bug where
+ * Interrupts stop flowing on high load on 8110SCd controllers.
+ */
if (tp->mac_version == RTL_GIGA_MAC_VER_05)
- /* 8110SCd requires hardware Rx VLAN - disallow toggling */
+ /* Disallow toggling */
dev->hw_features &= ~NETIF_F_HW_VLAN_CTAG_RX;

if (tp->txd_version == RTL_TD_0)
--
1.9.3


\
 
 \ /
  Last update: 2014-09-16 06:21    [W:0.130 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site