lkml.org 
[lkml]   [2014]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH] tty: serial: core: Only invoke ->start_tx() if there is data to send
On 09/10/2014 09:52 PM, Peter Hurley wrote:
> The serial core can't assume that start_tx() does not need invoking
> because hardware that can stop_tx() with data in the transmitter
> won't restart if the ring buffer is empty but data is still in the
> transmitter. [Note that the 16C950 port type does this in the 8250 driver.]

oh, not sure how I missed this… But now that I look at this, it is also
that ->x_char that could be use for flow control which would have to be
sent even with an empty xmit buffer.
And 8250 in DMA mode does not look at x_char at all. But it would be
better if it would, right? However if the TX side does a 2 KiB transfer
not sure what should be done…

> So this has to be handled in the 8250 driver.
>
> What is the actual issue? Are you trying not to unnecessarily wake
> the omap hardware if runtime-PM is on?

no, it is actually the extra interrupt for no reason that looked like
not needed at all. But I guess it is only during "startup" while the
init-script do fancy things and not during "normal" operations.

> Regards,
> Peter Hurley

Sebastian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-09-11 10:41    [W:0.041 / U:2.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site