lkml.org 
[lkml]   [2014]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 1/3] ARM: dts: Add Peach Pit dts entry for Atmel touchpad
On Wed, Sep 10, 2014 at 01:31:29PM +0200, Javier Martinez Canillas wrote:
> From: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
>
> The Peach Pit board has an Atmel maXTouch trackpad device.
> Add the needed Device Tree nodes to support it.
>
> This Device Tree change is based on the Chrome OS 3.8 tree
> but adapted to use the mainline Atmel maXTouch DT binding.
>
> Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>

Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

> ---
>
> Changes since v3:
> - Use KEY_RESERVED even for not reserved pins with a GPIO not hooked.
> Suggested by Nick Dyer.
> - Add a comment to specify the maXTouch chip version so is more clear.
> Suggested by Nick Dyer.
> - Omit trailing omit KEY_RESERVED after the GPIO pins. Suggested by Nick Dyer.
>
> Changes since v2:
> - Add spaces around '=' on properties. Suggested by Andreas Faerber.
>
> Changes since v1:
> - Change trackpad IRQ pad function from 0x0 (GPIO input) to 0xf (GPIO IRQ).
> suggested by Tomasz Figa.
> - Remove BTN_TOOL_* from "linux,gpio-keymap" property since those are set
> by input mt core if INPUT_MT_POINTER is set. Suggested by Nick Dyer.
> - Use correct values for "linux,gpio-keymap" property. Suggested by Nick Dyer.
> - Remove support for Peach Pi board since it uses a different Atmel touchpad
> that requires an Atmel object protocol (T100) not supported by the driver.
> - Use IRQ type constants from <dt-bindings/interrupt-controller/irq.h> instead
> of magic numbers. Suggested by Andreas Faerber.
>
> arch/arm/boot/dts/exynos5420-peach-pit.dts | 29 +++++++++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> index f247709..ad56d4c 100644
> --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
> +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> @@ -507,6 +507,28 @@
> };
> };
>
> +&hsi2c_8 {
> + status = "okay";
> + clock-frequency = <333000>;
> +
> + /* Atmel mXT336S */
> + trackpad@4b {
> + compatible = "atmel,maxtouch";
> + reg = <0x4b>;
> + interrupt-parent = <&gpx1>;
> + interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
> + wakeup-source;
> + pinctrl-names = "default";
> + pinctrl-0 = <&trackpad_irq>;
> + linux,gpio-keymap = <KEY_RESERVED
> + KEY_RESERVED
> + KEY_RESERVED /* GPIO0 */
> + KEY_RESERVED /* GPIO1 */
> + KEY_RESERVED /* GPIO2 */
> + BTN_LEFT>; /* GPIO3 */

Seems like a single space sneaked between the semicolon and the tab.
Maybe whoever applies could squash it.

Thanks.

--
Dmitry


\
 
 \ /
  Last update: 2014-09-11 01:01    [W:0.054 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site