[lkml]   [2014]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[RFC PATCH for Juno 0/2] Drivers for Juno to boot from ACPI
This patch set is example of the sort of driver changes needed to boot
Juno using ACPI tables, which using the ACPI tables devloped for MS
Windows and published by ARM [1].

For the smsc911x driver, it is based on the following ASL fragment
which is part of DSDT for Juno:

// LAN9118 Ethernet
Device(ETH0) {
Name(_HID, "ARMH9118")
Name(_UID, Zero)
Name(_CRS, ResourceTemplate() {
Memory32Fixed(ReadWrite, 0x1A000000, 0x1000)
Interrupt(ResourceConsumer, Level, ActiveHigh, Exclusive) { 192 }

UART driver is just for review purpose, ARM is working on a more
functional UART driver that does not poll to transmit. But it shows
how to initialise SBSA compatible UART without clock definitions in

You also can refer to the boot log from [2].


Graeme Gregory (2):
net: smsc911x add support for probing from ACPI
tty: SBSA compatible UART

drivers/net/ethernet/smsc/smsc911x.c | 38 ++++
drivers/tty/Kconfig | 6 +
drivers/tty/Makefile | 1 +
drivers/tty/sbsauart.c | 328 ++++++++++++++++++++++++++++++++++
4 files changed, 373 insertions(+)
create mode 100644 drivers/tty/sbsauart.c


 \ /
  Last update: 2014-09-01 17:41    [W:0.072 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site