lkml.org 
[lkml]   [2014]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] Documentation: DT bindings for AXM55xx SSP CS
Date
Bindings and documentation for AXM55xx SSP chip select controller.

Signed-off-by: Anders Berg <anders.berg@avagotech.com>
---
.../devicetree/bindings/gpio/gpio-axxia-sspcs.txt | 36 ++++++++++++++++++++++
1 file changed, 36 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-axxia-sspcs.txt

diff --git a/Documentation/devicetree/bindings/gpio/gpio-axxia-sspcs.txt b/Documentation/devicetree/bindings/gpio/gpio-axxia-sspcs.txt
new file mode 100644
index 0000000..a64c695
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-axxia-sspcs.txt
@@ -0,0 +1,36 @@
+* Axxia SSP GPIO chip-select driver
+
+The Axxia device has a ARM PL022 Prime Cell SSP controller with an extension of
+five chip select signals that may be controlled by software. This driver
+exports them as GPIOs.
+
+Required properties:
+
+ * compatible: should be "lsi,ssp-gpio"
+ * reg: address of the chip select control register.
+ * gpio-controller: mark the device as gpio controller
+ * #gpio-cells: should be 1 and this field specifies the chip select number
+
+Example:
+-------
+
+ spics: sspgpio@2010088030 {
+ compatible = "lsi,ssp-gpio";
+ #gpio-cells = <1>;
+ reg = <0x20 0x10088030 0x00 0x4>;
+ gpio-controller;
+ };
+
+ spi0: ssp@2010088000 {
+ compatible = "arm,pl022", "arm,primecell";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x20 0x10088000 0x00 0x1000>;
+ num-cs = <5>;
+ cs-gpios = <&spics 0>,
+ <&spics 1>,
+ <&spics 2>,
+ <&spics 3>,
+ <&spics 4>;
+ ...
+ };
--
1.9.1


\
 
 \ /
  Last update: 2014-09-01 15:21    [W:0.322 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site