lkml.org 
[lkml]   [2014]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 17/20] powerpc/8xx: Better readibility of ERRATA CPU6 handling
Date
This patch hiddes that SPR address needed for CPU6 ERRATA handling in the macro.
Then we don't have to worry about this address directly in the code.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>

---
arch/powerpc/kernel/head_8xx.S | 29 ++++++++++++++++-------------
1 files changed, 16 insertions(+), 13 deletions(-)

diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 82e4139..3e11b87 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -33,12 +33,19 @@

/* Macro to make the code more readable. */
#ifdef CONFIG_8xx_CPU6
-#define DO_8xx_CPU6(val, reg) \
- li reg, val; \
- stw reg, 12(r0); \
- lwz reg, 12(r0);
+#define SPRN_MI_TWC_ADDR 0x2b80
+#define SPRN_MI_RPN_ADDR 0x2d80
+#define SPRN_MD_TWC_ADDR 0x3b80
+#define SPRN_MD_RPN_ADDR 0x3d80
+
+#define MTSPR_CPU6(spr, reg, treg) \
+ li treg, spr##_ADDR; \
+ stw treg, 12(r0); \
+ lwz treg, 12(r0); \
+ mtspr spr, reg
#else
-#define DO_8xx_CPU6(val, reg)
+#define MTSPR_CPU6(spr, reg, treg) \
+ mtspr spr, reg
#endif

/*
@@ -333,8 +340,7 @@ InstructionTLBMiss:
* for this "segment."
*/
ori r11,r11,1 /* Set valid bit */
- DO_8xx_CPU6(0x2b80, r3)
- mtspr SPRN_MI_TWC, r11 /* Set segment attributes */
+ MTSPR_CPU6(SPRN_MI_TWC, r11, r3) /* Set segment attributes */
mfspr r11, SPRN_SRR0 /* Get effective address of fault */
/* Extract level 2 index */
rlwinm r11, r11, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29
@@ -353,8 +359,7 @@ InstructionTLBMiss:
*/
li r11, RPN_PATTERN
rlwimi r10, r11, 0, 0x07f8 /* Set 24-27, clear 21-23,28 */
- DO_8xx_CPU6(0x2d80, r3)
- mtspr SPRN_MI_RPN, r10 /* Update TLB entry */
+ MTSPR_CPU6(SPRN_MI_RPN, r10, r3) /* Update TLB entry */

/* Restore registers */
#ifdef CONFIG_8xx_CPU6
@@ -423,8 +428,7 @@ DataStoreTLBMiss:
* It is bit 25 in the Linux PTE and bit 30 in the TWC
*/
rlwimi r11, r10, 32-5, 30, 30
- DO_8xx_CPU6(0x3b80, r3)
- mtspr SPRN_MD_TWC, r11
+ MTSPR_CPU6(SPRN_MD_TWC, r11, r3)

/* Both _PAGE_ACCESSED and _PAGE_PRESENT has to be set.
* We also need to know if the insn is a load/store, so:
@@ -457,8 +461,7 @@ DataStoreTLBMiss:
*/
2: li r11, RPN_PATTERN
rlwimi r10, r11, 0, 24, 28 /* Set 24-27, clear 28 */
- DO_8xx_CPU6(0x3d80, r3)
- mtspr SPRN_MD_RPN, r10 /* Update TLB entry */
+ MTSPR_CPU6(SPRN_MD_RPN, r10, r3) /* Update TLB entry */

/* Restore registers */
#ifdef CONFIG_8xx_CPU6
--
1.7.1


\
 
 \ /
  Last update: 2014-08-08 09:21    [W:0.041 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site