lkml.org 
[lkml]   [2014]   [Aug]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] Input: atmel_mxt_ts - Get IRQ edge/level flags on DT booting
Date
The Atmel maXTouch driver assumed that the IRQ type flags will
always be passed using platform data but this is not true when
booting using Device Trees. In these setups the interrupt type
was ignored by the driver when requesting an IRQ.

This means that it will fail if a machine specified other type
than IRQ_TYPE_NONE. The right approach is to get the IRQ flags
that was parsed by OF from the "interrupt" Device Tree propery.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 03b8571..0fb56c9 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -22,6 +22,7 @@
#include <linux/i2c.h>
#include <linux/i2c/atmel_mxt_ts.h>
#include <linux/input/mt.h>
+#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/of.h>
#include <linux/slab.h>
@@ -2130,6 +2131,7 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
struct mxt_data *data;
const struct mxt_platform_data *pdata;
int error;
+ unsigned long irqflags;

pdata = dev_get_platdata(&client->dev);
if (!pdata) {
@@ -2156,8 +2158,13 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
init_completion(&data->reset_completion);
init_completion(&data->crc_completion);

+ if (client->dev.of_node)
+ irqflags = irq_get_trigger_type(client->irq);
+ else
+ irqflags = pdata->irqflags;
+
error = request_threaded_irq(client->irq, NULL, mxt_interrupt,
- pdata->irqflags | IRQF_ONESHOT,
+ irqflags | IRQF_ONESHOT,
client->name, data);
if (error) {
dev_err(&client->dev, "Failed to register interrupt\n");
--
2.0.0.rc2


\
 
 \ /
  Last update: 2014-08-07 03:01    [W:1.883 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site