lkml.org 
[lkml]   [2014]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: zram: device management utility needed
Cc Jerome

Hello,

my quick thoughts on the topic. first, I'm not against, and we might have
something like this one day, but...

On (07/30/14 00:14), Sami Kerola wrote:
> Hello,
>
> Not so long ago Timofey has reached both util-linux[1] and kernel[2]
> contributors with intention to make zram device management too. I think
> the proposal is good, and there should be distribution independent tool
> like that. Also such command fits fairly well to a scope of util-linux
> package. But a tool is only as good as kernel support of it is. This
> mail is a bit about both.
>
> Existing proposal for zramctl[3], wrote by Timofey, does what I would
> call great starting point. It can resize zram device, select algorithm,
> and set number of threads. Unfortunately it cannot create or remove zram
> devices.
>
> The zram devices are not created by any sort of equipment appearing in a
> bus so an method of creating new or removing existing devices will be
> needed. When the zram module is loaded it should create
> /dev/zram-control device, that responds to ioctl() calls[4]. The calls
> could be similar with /dev/loop-control[5], that allow adding or removing
> specified device, and discover adding a free device.
>
> This proposal would not affect the current initialization of the zram
> devices[6]. It would be an addition to manage zram devices after kernel
> module is loaded, of course each device separately and individually. At
> the moment adding a device requires removing the existing devices[7],
> which can mean data loss, and at least unnecessary hassle when performing
> a device addition task.

well, run-time data loss, assuming that fs has failed to read a page,
because e.g. zram has mistakenly discarded it, I believe, is out of this
topic. any other type of data loss is out of zram design. whenever user
decides to umount/reboot/etc., it's his/her sole responsibility to keep
the data, zram is not meant to help here.

uninitialised or reset (when unneeded) device *must* be almost free:
there are no zspool, fs, compression backend, etc. which means that
one can pre-allocated as many devices as he needs and init/reset devices
whenever required.

so the problem seems to be "we can do A, but it doesn't look very
convenient", rather than "we can't do A".

-ss

>
> But before getting too exited and asking for ioctl() allocation, or
> thinking too much about code, does an overall plan like this make sense?
> Is there an alternative that would be better than /dev/zram-control +
> ioctl()'s? Any other comments, better proposal, and so on?
>
> Finally, Hats off to Timofey, you got the ball rolling getting the zram
> devices being dynamic someday in future.
>
> [1] http://www.spinics.net/lists/util-linux-ng/index.html#09781
> [2] https://lkml.org/lkml/2014/7/17/272
> [3] http://www.spinics.net/lists/util-linux-ng/msg09900.html
> [4] http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/ioctl/ioctl-number.txt?id=31dab719fa50cf56d56d3dc25980fecd336f6ca8
> [5] http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/drivers/block/loop.c?id=31dab719fa50cf56d56d3dc25980fecd336f6ca8#n1757
> [6] such as: modprobe zram num_devices=4
> [7] requires 'rmmod zram' which is not possible if any zram device is busy
>
> --
> Sami Kerola
> http://www.iki.fi/kerolasa/
>


\
 
 \ /
  Last update: 2014-08-04 15:21    [W:0.485 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site