Messages in this thread Patch in this message | | | From | Antoine Tenart <> | Subject | [PATCH 2/5] Documentation: bindings: net: add the Marvell Berlin Ethernet controller | Date | Fri, 29 Aug 2014 15:51:00 +0200 |
| |
This adds the binding documentation for the Marvell Berlin Ethernet controller.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> --- .../devicetree/bindings/net/marvell-berlin.txt | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/marvell-berlin.txt
diff --git a/Documentation/devicetree/bindings/net/marvell-berlin.txt b/Documentation/devicetree/bindings/net/marvell-berlin.txt new file mode 100644 index 000000000000..0ae468aef13f --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell-berlin.txt @@ -0,0 +1,23 @@ +* Marvell Berlin Ethernet Controller + +Required properties: +- compatible: should be "marvell,berlin-eth". +- reg: address and length of the register set for the device. +- interrupts: interrupt for the device. +- phy-handle: pointer to the Ethernet PHY. +- clocks: pointer to the clock for the device. + +Optional properties: +- local-mac-address: see ethernet.txt file in the same directory. + + +Example: + + eth0: ethernet@f7b90000 { + compatible = "marvell,berlin-eth"; + reg = <0xf7b90000 0x10000>; + clocks = <&chip CLKID_GETH0>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + phy-handle = <ðphy0>; + local-mac-address = [00 00 00 00 00 00]; + }; -- 1.9.1
| |