lkml.org 
[lkml]   [2014]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 3/4] zram: zram memory size limitation
On Wed, Aug 27, 2014 at 10:44 AM, David Horner <ds2horner@gmail.com> wrote:
> On Wed, Aug 27, 2014 at 10:03 AM, Dan Streetman <ddstreet@ieee.org> wrote:
>> On Tue, Aug 26, 2014 at 10:51 PM, Minchan Kim <minchan@kernel.org> wrote:
>>> Hey Joonsoo,
>>>
>>> On Wed, Aug 27, 2014 at 10:26:11AM +0900, Joonsoo Kim wrote:
>>>> Hello, Minchan and David.
>>>>
>>>> On Tue, Aug 26, 2014 at 08:22:29AM -0400, David Horner wrote:
>>>> > On Tue, Aug 26, 2014 at 3:55 AM, Minchan Kim <minchan@kernel.org> wrote:
>>>> > > Hey Joonsoo,
>>>> > >
>>>> > > On Tue, Aug 26, 2014 at 04:37:30PM +0900, Joonsoo Kim wrote:
>>>> > >> On Mon, Aug 25, 2014 at 09:05:55AM +0900, Minchan Kim wrote:
>>>> > >> > @@ -513,6 +540,14 @@ static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index,
>>>> > >> > ret = -ENOMEM;
>>>> > >> > goto out;
>>>> > >> > }
>>>> > >> > +
>>>> > >> > + if (zram->limit_pages &&
>>>> > >> > + zs_get_total_pages(meta->mem_pool) > zram->limit_pages) {
>>>> > >> > + zs_free(meta->mem_pool, handle);
>>>> > >> > + ret = -ENOMEM;
>>>> > >> > + goto out;
>>>> > >> > + }
>>>> > >> > +
>>>> > >> > cmem = zs_map_object(meta->mem_pool, handle, ZS_MM_WO);
>>>> > >>
>>>> > >> Hello,
>>>> > >>
>>>> > >> I don't follow up previous discussion, so I could be wrong.
>>>> > >> Why this enforcement should be here?
>>>> > >>
>>>> > >> I think that this has two problems.
>>>> > >> 1) alloc/free happens unnecessarilly if we have used memory over the
>>>> > >> limitation.
>>>> > >
>>>> > > True but firstly, I implemented the logic in zsmalloc, not zram but
>>>> > > as I described in cover-letter, it's not a requirement of zsmalloc
>>>> > > but zram so it should be in there. If every user want it in future,
>>>> > > then we could move the function into zsmalloc. That's what we
>>>> > > concluded in previous discussion.
>>>>
>>>> Hmm...
>>>> Problem is that we can't avoid these unnecessary overhead in this
>>>> implementation. If we can implement this feature in zram efficiently,
>>>> it's okay. But, I think that current form isn't.
>>>
>>>
>>> If we can add it in zsmalloc, it would be more clean and efficient
>>> for zram but as I said, at the moment, I didn't want to put zram's
>>> requirement into zsmalloc because to me, it's weird to enforce max
>>> limit to allocator. It's client's role, I think.
>>>
>>> If current implementation is expensive and rather hard to follow,
>>> It would be one reason to move the feature into zsmalloc but
>>> I don't think it makes critical trobule in zram usecase.
>>> See below.
>>>
>>> But I still open and will wait others's opinion.
>>> If other guys think zsmalloc is better place, I am willing to move
>>> it into zsmalloc.
>>
>> Moving it into zsmalloc would allow rejecting new zsmallocs before
>> actually crossing the limit, since it can calculate that internally.
>> However, with the current patches the limit will only be briefly
>> crossed, and it should not be crossed by a large amount. Now, if this
>> is happening repeatedly and quickly during extreme memory pressure,
>> the constant alloc/free will clearly be worse than a simple internal
>> calculation and failure. But would it ever happen repeatedly once the
>> zram limit is reached?
>>
>> Now that I'm thinking about the limit from the perspective of the zram
>> user, I wonder what really will happen. If zram is being used for
>> swap space, then when swap starts getting errors trying to write
>> pages, how damaging will that be to the system? I haven't checked
>> what swap does when it encounters disk errors. Of course, with no
>> zram limit, continually writing to zram until memory is totally
>> consumed isn't good either. But in any case, I would hope that swap
>> would not repeatedly hammer on a disk when it's getting write failures
>> from it.
>>
>> Alternately, if zram was being used as a compressed ram disk for
>> regular file storage, it's entirely up to the application to handle
>> write failures, so it may continue to try to write to a full zram
>> disk.
>>
>> As far as what the zsmalloc api would look like with the limit added,
>> it would need a setter and getter function (adding it as a param to
>> the create function would be optional i think). But more importantly,
>> it would need to handle multiple ways of specifying the limit. In our
>> specific current use cases, zram and zswap, each handles their
>> internal limit differently - zswap currently uses a % of total ram as
>> its limit (defaulting to 20), while with these patches zram will use a
>> specific number of bytes as its limit (defaulting to no limit). If
>> the limiting mechanism is moved into zsmalloc (and possibly zbud),
>> then either both users need to use the same units (bytes or %ram), or
>> zsmalloc/zbud need to be able to set their limit in either units. It
>> seems to me like keeping the limit in zram/zswap is currently
>> preferable, at least without both using the same limit units.
>>
>
> zswap knows what 20% (or whatever % it currently uses , and perhaps it too
> will become a tuning knob) of memory is in bytes.
>
> So, if the interface to establish a limit for a pool (or pool set, or whatever
> zsmalloc sets up for its allocation mechanism) is stipulated in bytes
> (to actually use pages internally, of visa-versa) , then both can use
> that interface.
> zram with its native page stipulation, and zswap with calculated % of memory).

No, unless zswap monitors memory hotplug and updates the limit on each
hotplug event, 20% of the *current* total ram at zswap initialization
is not equal to an actual 20% of ram limit. zswap checks its size
against totalram_pages for each new allocation. I don't think we would
prefer adding memory hotplug monitoring to zswap just to update the
zpool size limit.

>
> Both would need a mechanism to change the max as need change,
> so the API has to handle this.
>
>
> Or am I way off base?
>
>
>>
>>>
>>>>
>>>> > >
>>>> > > Another idea is we could call zs_get_total_pages right before zs_malloc
>>>> > > but the problem is we cannot know how many of pages are allocated
>>>> > > by zsmalloc in advance.
>>>> > > IOW, zram should be blind on zsmalloc's internal.
>>>> > >
>>>> >
>>>> > We did however suggest that we could check before hand to see if
>>>> > max was already exceeded as an optimization.
>>>> > (possibly with a guess on usage but at least using the minimum of 1 page)
>>>> > In the contested case, the max may already be exceeded transiently and
>>>> > therefore we know this one _could_ fail (it could also pass, but odds
>>>> > aren't good).
>>>> > As Minchan mentions this was discussed before - but not into great detail.
>>>> > Testing should be done to determine possible benefit. And as he also
>>>> > mentions, the better place for it may be in zsmalloc, but that
>>>> > requires an ABI change.
>>>>
>>>> Why we hesitate to change zsmalloc API? It is in-kernel API and there
>>>> are just two users now, zswap and zram. We can change it easily.
>>>> I think that we just need following simple API change in zsmalloc.c.
>>>>
>>>> zs_zpool_create(gfp_t gfp, struct zpool_ops *zpool_op)
>>>> =>
>>>> zs_zpool_create(unsigned long limit, gfp_t gfp, struct zpool_ops
>>>> *zpool_op)
>>>>
>>>> It's pool allocator so there is no obstacle for us to limit maximum
>>>> memory usage in zsmalloc. It's a natural idea to limit memory usage
>>>> for pool allocator.
>>>>
>>>> > Certainly a detailed suggestion could happen on this thread and I'm
>>>> > also interested
>>>> > in your thoughts, but this patchset should be able to go in as is.
>>>> > Memory exhaustion avoidance probably trumps the possible thrashing at
>>>> > threshold.
>>>> >
>>>> > > About alloc/free cost once if it is over the limit,
>>>> > > I don't think it's important to consider.
>>>> > > Do you have any scenario in your mind to consider alloc/free cost
>>>> > > when the limit is over?
>>>> > >
>>>> > >> 2) Even if this request doesn't do new allocation, it could be failed
>>>> > >> due to other's allocation. There is time gap between allocation and
>>>> > >> free, so legimate user who want to use preallocated zsmalloc memory
>>>> > >> could also see this condition true and then he will be failed.
>>>> > >
>>>> > > Yeb, we already discussed that. :)
>>>> > > Such false positive shouldn't be a severe problem if we can keep a
>>>> > > promise that zram user cannot exceed mem_limit.
>>>> > >
>>>>
>>>> If we can keep such a promise, why we need to limit memory usage?
>>>> I guess that this limit feature is useful for user who can't keep such promise.
>>>> So, we should assume that this false positive happens frequently.
>>>
>>>
>>> The goal is to limit memory usage within some threshold.
>>> so false positive shouldn't be harmful unless it exceeds the threshold.
>>> In addition, If such false positive happens frequently, it means
>>> zram is very trobule so that user would see lots of write fail
>>> message, sometime really slow system if zram is used for swap.
>>> If we protect just one write from the race, how much does it help
>>> this situation? I don't think it's critical problem.
>>>
>>>>
>>>> > And we cannot avoid the race, nor can we avoid in a low overhead competitive
>>>> > concurrent process transient inconsistent states.
>>>> > Different views for different observers.
>>>> > They are a consequence of the theory of "Special Computational Relativity".
>>>> > I am working on a String Unification Theory of Quantum and General CR in LISP.
>>>> > ;-)
>>>>
>>>> If we move limit logic to zsmalloc, we can avoid the race by commiting
>>>> needed memory size before actual allocation attempt. This commiting makes
>>>> concurrent process serialized so there is no race here. There is
>>>> possibilty to fail to allocate, but I think this is better than alloc
>>>> and free blindlessly depending on inconsistent states.
>>>
>>> Normally, zsmalloc/zsfree allocates object from existing pool so
>>> it's not big overhead and if someone continue to try writing once limit is
>>> full, another overhead (vfs, fs, block) would be bigger than zsmalloc
>>> so it's not a problem, I think.
>>>
>>>>
>>>> Thanks.
>>>>
>>>> --
>>>> To unsubscribe, send a message with 'unsubscribe linux-mm' in
>>>> the body to majordomo@kvack.org. For more info on Linux MM,
>>>> see: http://www.linux-mm.org/ .
>>>> Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
>>>
>>> --
>>> Kind regards,
>>> Minchan Kim


\
 
 \ /
  Last update: 2014-08-27 17:21    [W:0.100 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site