lkml.org 
[lkml]   [2014]   [Aug]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v9 1/2] regulator: Add driver for max77802 PMIC PMIC regulators
On Fri, Aug 22, 2014 at 07:53:19PM +0200, Javier Martinez Canillas wrote:
> On 08/22/2014 04:45 PM, Mark Brown wrote:
> > On Fri, Aug 22, 2014 at 02:15:46PM +0200, Javier Martinez Canillas wrote:

> >> Mark, any opinions on how this should be solved will be highly appreciated.

> > If someone could tell me what "this" is that'd help...

> Sorry for not being clear on that regard. By "this" I meant the problem
> reported by Yuvaraj.

That mail was rather lengthy and seemed to be discussing several issues.

> The problem is that one of these regulators is used as the vqmmc-supply
> (VCCQ/VDD_IO) so the mmc host controller driver disables it on
> MMC_POWER_OFF. Now AFAIK (Yuvaraj can correct me what I got wrong) this
> shouldn't be an issue since on card detection, the vqmmc supply should be
> enabled again but on Exynos the built-in card detect line is on the same
> power rail as vqmmc. That means that disabling the regulator prevents card
> insertions to be detected.

If the MMC host controller needs a supply enabling in order to do card
detection and it's supposed to be doing card detection I'd expect it to
be enabling that supply. Why is it not doing that?
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2014-08-22 20:41    [W:0.068 / U:0.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site