lkml.org 
[lkml]   [2014]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] pmbus: ltc2978: add regulator gating
On Thu, Aug 21, 2014 at 08:26:22PM -0500, Mark Brown wrote:
> On Thu, Aug 21, 2014 at 06:18:10PM -0700, Guenter Roeck wrote:
> > On Thu, Aug 21, 2014 at 07:36:50PM -0500, Mark Brown wrote:
> > > On Thu, Aug 21, 2014 at 05:21:26PM -0500, atull@opensource.altera.com wrote:
>
> > > This all looks very much like pmbus could use regmap and then the regmap
> > > helpers. I'd not insist on it though. What I would however suggest is
>
> > Not unless regmap got extended recently to support quick, byte, and word
> > smbus accesses at the same time.
>
> Depending on how you decide which it quite possibly does - if it's based
> on the register number that'd work.

Mostly per register, but also per chip (for manufacturing specific registers
the register size is determined by the chip type). Also, there are block
registers. Plus, the scope of each register (ie if it is paged or not)
is chip specific. The same register may be paged on one chip, and unpaged
on another. I'll have another look to see if that all can be mapped into the
regmap model. If yes, it might actually be quite helpful and might simplify
the pmbus code quite a bit.

Either case, even if regmap now supports all the PMBus oddities, converting
the pmbus drivers to use regmap should be a separate patch set and not be
tied together.

Tnanks,
Guenter


\
 
 \ /
  Last update: 2014-08-22 04:41    [W:0.043 / U:0.832 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site