lkml.org 
[lkml]   [2014]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/7] MIPS: sead3: Move device-trees to arch/mips/boot/dts/
Date
Move the SEAD-3 device-tree to arch/mips/boot/dts/ and update the
Makefiles accordingly. Since SEAD-3 requires the device-tree to be
built into the kernel, select BUILTIN_DTB when building for SEAD-3.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
---
arch/mips/Kconfig | 1 +
arch/mips/boot/dts/Makefile | 1 +
arch/mips/{mti-sead3 => boot/dts}/sead3.dts | 0
arch/mips/mti-sead3/Makefile | 4 ----
4 files changed, 2 insertions(+), 4 deletions(-)
rename arch/mips/{mti-sead3 => boot/dts}/sead3.dts (100%)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index dbfcf35..a72c7c9 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -353,6 +353,7 @@ config MIPS_SEAD3
bool "MIPS SEAD3 board"
select BOOT_ELF32
select BOOT_RAW
+ select BUILTIN_DTB
select CEVT_R4K
select CSRC_R4K
select CSRC_GIC
diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
index 4f265ec..8df3d3e 100644
--- a/arch/mips/boot/dts/Makefile
+++ b/arch/mips/boot/dts/Makefile
@@ -1,5 +1,6 @@
dtb-$(CONFIG_CAVIUM_OCTEON_SOC) += octeon_3xxx.dtb octeon_68xx.dtb
dtb-$(CONFIG_DT_EASY50712) += easy50712.dtb
+dtb-$(CONFIG_MIPS_SEAD3) += sead3.dtb

obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))

diff --git a/arch/mips/mti-sead3/sead3.dts b/arch/mips/boot/dts/sead3.dts
similarity index 100%
rename from arch/mips/mti-sead3/sead3.dts
rename to arch/mips/boot/dts/sead3.dts
diff --git a/arch/mips/mti-sead3/Makefile b/arch/mips/mti-sead3/Makefile
index 071786f..febf433 100644
--- a/arch/mips/mti-sead3/Makefile
+++ b/arch/mips/mti-sead3/Makefile
@@ -19,9 +19,5 @@ obj-y += sead3-i2c-dev.o sead3-i2c.o \

obj-$(CONFIG_EARLY_PRINTK) += sead3-console.o
obj-$(CONFIG_USB_EHCI_HCD) += sead3-ehci.o
-obj-$(CONFIG_OF) += sead3.dtb.o

CFLAGS_sead3-setup.o = -I$(src)/../../../scripts/dtc/libfdt
-
-$(obj)/%.dtb: $(obj)/%.dts
- $(call if_changed,dtc)
--
2.1.0.rc2.206.gedb03e5


\
 
 \ /
  Last update: 2014-08-21 22:21    [W:0.231 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site