lkml.org 
[lkml]   [2014]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Patch V4 29/42] x86, irq: introduce two helper functions to support irqdomain map operation
On Thu, Aug 21, 2014 at 05:17:29PM +0300, Mika Westerberg wrote:
> On Mon, Jun 09, 2014 at 04:19:58PM +0800, Jiang Liu wrote:
> > Currently there are multiple entries to program IOAPIC pins, such as
> > io_apic_setup_irq_pin_once(), io_apic_set_pci_routing() and
> > setup_IO_APIC_irq_extra() etc.
> >
> > This patch introduces two functions to help consolidate the code to
> > program IOAPIC pins. Function mp_set_pin_attr() is used to optionally
> > set trigger, polarity and NUMA node property for an IOAPIC pin.
> > If mp_set_pin_attr() is not invoked for a pin, the default configuration
> > from BIOS will be used.
> >
> > Function mp_irqdomain_map() is an common implementation of irqdomain map()
> > operation. It figures out attribures for pin and then actually programs
> > the IOAPIC pin. We hope this will be the only entrance for programming
> > IOAPIC pin.
> >
> > And the flow will:
> > 1) caller such as xxx_pci_irq_enable figures out pin attributes.
> > 2) Invoke mp_set_pin_attr() to set attributes for a pin. If the pin has
> > already bin programmed, mp_set_pin_attr() will aslo detects attribute
> > confictions.
> > 3) Invoke mp_map_pin_to_irq()
> > 3.1) If IRQ has already been assigned, return irq_find_mapping()
> > 3.2) Else irq_create_mapping()
> > ->irq_domain_associate()
> > ->mp_irqdomain_map()
> > ->io_apic_setup_irq_pin()
> >
> > So every pin will only programmed once by mp_irqdomain_map(), so we
> > could kill io_apic_setup_irq_pin_once(), io_apic_set_pci_routing() and
> > setup_IO_APIC_irq_extra() etc.
> >
> > Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
> > ---
> > arch/x86/include/asm/io_apic.h | 5 ++
> > arch/x86/kernel/apic/io_apic.c | 99 +++++++++++++++++++++++++++++++++++++++-
> > 2 files changed, 103 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
> > index 3e4bea3a52b1..c53587868590 100644
> > --- a/arch/x86/include/asm/io_apic.h
> > +++ b/arch/x86/include/asm/io_apic.h
> > @@ -173,7 +173,9 @@ enum ioapic_domain_type {
> > };
> >
> > struct device_node;
> > +struct irq_domain;
> > struct irq_domain_ops;
> > +
> > struct ioapic_domain_cfg {
> > enum ioapic_domain_type type;
> > const struct irq_domain_ops *ops;
> > @@ -192,6 +194,9 @@ extern u32 mp_pin_to_gsi(int ioapic, int pin);
> > extern int mp_map_gsi_to_irq(u32 gsi, unsigned int flags);
> > extern void __init mp_register_ioapic(int id, u32 address, u32 gsi_base,
> > struct ioapic_domain_cfg *cfg);
> > +extern int mp_irqdomain_map(struct irq_domain *domain, unsigned int virq,
> > + irq_hw_number_t hwirq);
> > +extern int mp_set_gsi_attr(u32 gsi, int trigger, int polarity, int node);
> > extern void __init pre_init_apic_IRQ0(void);
> >
> > extern void mp_save_irq(struct mpc_intsrc *m);
> > diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
> > index 9c5f70699a80..61aae90f7e23 100644
> > --- a/arch/x86/kernel/apic/io_apic.c
> > +++ b/arch/x86/kernel/apic/io_apic.c
> > @@ -87,6 +87,14 @@ static DEFINE_RAW_SPINLOCK(vector_lock);
> > static DEFINE_MUTEX(ioapic_mutex);
> > static unsigned int ioapic_dynirq_base;
> >
> > +struct mp_pin_info {
> > + int trigger;
> > + int polarity;
> > + int node;
> > + int set;
> > + u32 count;
> > +};
> > +
> > static struct ioapic {
> > /*
> > * # of IRQ routing registers
> > @@ -102,6 +110,7 @@ static struct ioapic {
> > struct mp_ioapic_gsi gsi_config;
> > struct ioapic_domain_cfg irqdomain_cfg;
> > struct irq_domain *irqdomain;
> > + struct mp_pin_info *pin_info;
> > DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
> > } ioapics[MAX_IO_APICS];
> >
> > @@ -147,6 +156,11 @@ static inline int mp_init_irq_at_boot(int ioapic, int irq)
> > return ioapic == 0 || (irq >= 0 && irq < nr_legacy_irqs());
> > }
> >
> > +static inline struct mp_pin_info *mp_pin_info(int ioapic_idx, int pin)
> > +{
> > + return ioapics[ioapic_idx].pin_info + pin;
> > +}
> > +
> > static inline struct irq_domain *mp_ioapic_irqdomain(int ioapic)
> > {
> > return ioapics[ioapic].irqdomain;
> > @@ -1006,6 +1020,7 @@ static int mp_map_pin_to_irq(u32 gsi, int idx, int ioapic, int pin,
> > {
> > int irq;
> > struct irq_domain *domain = mp_ioapic_irqdomain(ioapic);
> > + struct mp_pin_info *info = mp_pin_info(ioapic, pin);
> >
> > /*
> > * Don't use irqdomain to manage ISA IRQs because there may be
> > @@ -1034,6 +1049,13 @@ static int mp_map_pin_to_irq(u32 gsi, int idx, int ioapic, int pin,
> > irq = irq_find_mapping(domain, pin);
> > if (irq <= 0 && (flags & IOAPIC_MAP_ALLOC))
> > irq = alloc_irq_from_domain(domain, gsi, pin);
> > +
> > + if (flags & IOAPIC_MAP_ALLOC) {
> > + if (irq > 0)
> > + info->count++;
> > + else if (info->count == 0)
> > + info->set = 0;
> > + }
> > mutex_unlock(&ioapic_mutex);
> >
> > return irq > 0 ? irq : -1;
> > @@ -2923,18 +2945,27 @@ out:
> >
> > static int mp_irqdomain_create(int ioapic)
> > {
> > + size_t size;
> > int hwirqs = mp_ioapic_pin_count(ioapic);
> > struct ioapic *ip = &ioapics[ioapic];
> > struct ioapic_domain_cfg *cfg = &ip->irqdomain_cfg;
> > struct mp_ioapic_gsi *gsi_cfg = mp_ioapic_gsi_routing(ioapic);
> >
> > + size = sizeof(struct mp_pin_info) * mp_ioapic_pin_count(ioapic);
> > + ip->pin_info = kzalloc(size, GFP_KERNEL);
> > + if (!ip->pin_info)
> > + return -ENOMEM;
> > +
> > if (cfg->type == IOAPIC_DOMAIN_INVALID)
> > return 0;
> >
> > ip->irqdomain = irq_domain_add_linear(cfg->dev, hwirqs, cfg->ops,
> > (void *)(long)ioapic);
> > - if(!ip->irqdomain)
> > + if(!ip->irqdomain) {
> > + kfree(ip->pin_info);
> > + ip->pin_info = NULL;
> > return -ENOMEM;
> > + }
> >
> > if (cfg->type == IOAPIC_DOMAIN_LEGACY ||
> > cfg->type == IOAPIC_DOMAIN_STRICT)
> > @@ -3898,6 +3929,72 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base,
> > nr_ioapics++;
> > }
> >
> > +int mp_irqdomain_map(struct irq_domain *domain, unsigned int virq,
> > + irq_hw_number_t hwirq)
> > +{
> > + int ioapic = (int)(long)domain->host_data;
> > + struct mp_pin_info *info = mp_pin_info(ioapic, hwirq);
> > + struct io_apic_irq_attr attr;
> > +
> > + /*
> > + * Skip the timer IRQ if there's a quirk handler installed and if it
> > + * returns 1:
> > + */
> > + if (apic->multi_timer_check &&
> > + apic->multi_timer_check(ioapic, virq))
> > + return 0;
> > +
> > + /* Get default attribute if not set by caller yet */
> > + if (!info->set) {
> > + u32 gsi = mp_pin_to_gsi(ioapic, hwirq);
> > +
> > + if (acpi_get_override_irq(gsi, &info->trigger,
> > + &info->polarity) < 0) {
>
> Sadly this seems to break LPSS ACPI enumerated devices.
>
> Before this change /proc/interrupts say:
>
> 0: 14 0 0 0 IO-APIC-edge timer
> 1: 10 0 0 0 IO-APIC-edge i8042
> 4: 79 0 0 0 IO-APIC-edge serial
> 5: 52 0 0 0 IO-APIC-fasteoi mmc0
> 6: 0 0 0 0 IO-APIC-fasteoi dw_dmac
> 7: 0 0 0 0 IO-APIC-fasteoi INT3432:00, INT3433:00
> 8: 1 0 0 0 IO-APIC-edge rtc0
> 9: 174 0 0 0 IO-APIC-fasteoi acpi
> 57: 476 0 0 0 PCI-MSI-edge xhci_hcd
> 58: 17 0 0 0 PCI-MSI-edge snd_hda_intel
>
> After the change it looks like this:
>
> 0: 14 0 0 0 IO-APIC-edge timer
> 1: 10 0 0 0 IO-APIC-edge i8042
> 4: 64 0 0 0 IO-APIC-edge serial
> 5: 0 0 0 0 IO-APIC-edge mmc0
> 6: 0 0 0 0 IO-APIC-edge dw_dmac
> 7: 0 0 0 0 IO-APIC-edge INT3432:00, INT3433:00
> 8: 1 0 0 0 IO-APIC-edge rtc0
> 9: 173 0 0 0 IO-APIC-fasteoi acpi
> 41: 471 0 0 0 PCI-MSI-edge xhci_hcd
> 42: 17 0 0 0 PCI-MSI-edge snd_hda_intel
>
> Notice the interrupt triggering of IRQs 5, 6, and 7 has changed from level to
> edge. I also see this printed on the console:
>
> [ 1.676685] Failed to set pin attr for GSI6
> [ 1.691708] Failed to set pin attr for GSI7
> [ 1.706750] Failed to set pin attr for GSI7
> [ 1.721768] Failed to set pin attr for GSI13
> [ 1.736765] Failed to set pin attr for GSI5
> [ 1.838342] Failed to set pin attr for GSI6
>
> Any ideas how to get that fixed?
>
> We used to handle this in drivers/acpi/resource.c:acpi_dev_get_irqresource() so
> that only IRQ() and IRQNoFlags() ACPI resources resort calling
> acpi_get_override_irq(). Now that doesn't help anymore.

There's also a bugzilla bug filed about this here where touchpad stopped
working:

https://bugzilla.kernel.org/show_bug.cgi?id=82601


\
 
 \ /
  Last update: 2014-08-21 19:41    [W:0.076 / U:4.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site