lkml.org 
[lkml]   [2014]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RESEND PATCH v2 4/4] dt-bindings: add bindings for mediatek intpol
From
2014-08-13 4:11 GMT+02:00 Joe.C <srv_yingjoe.chen@mediatek.com>:
> From: "Joe.C" <yingjoe.chen@mediatek.com>
>
> Add binding documentation for Mediatek SoC GIC interrupt polarity extension.
>
> Signed-off-by: Joe.C <yingjoe.chen@mediatek.com>
> ---
> .../bindings/interrupt-controller/mediatek,intpol.txt | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mediatek,intpol.txt

I think the place for the file should be in
Documentation/devicetree/bindings/arm/mediatek/mediatek,intpol.txt as
it is a interrupt-controller extension of the mediatek architecture.

>
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,intpol.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,intpol.txt
> new file mode 100644
> index 0000000..16ea372
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,intpol.txt
> @@ -0,0 +1,16 @@
> +Mediatek 65xx/81xx GIC interrupt polarity extension
> +
> +Mediatek SOCs contain controllable inverter for each GIC SPI interrupt,
> +these can be used as GIC interrupt polarity extension.
> +
> +Required properties:
> +- compatible: Compatible property value should be "mediatek,mt6577-intpol"
> +
> +- reg: Physical base address of the int pol registers and length of memory
> + mapped region.
> +
> +Example:
> + intpol: intpol@10200100 {
> + compatible = "mediatek,mt6577-intpol";
> + reg = <0x10200100 0x1c>;
> + };
> --
> 1.8.1.1.dirty
>



--
motzblog.wordpress.com


\
 
 \ /
  Last update: 2014-08-21 17:41    [W:0.025 / U:0.932 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site