lkml.org 
[lkml]   [2014]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 2/3] usb: dwc3: dwc3-st: Add st-dwc3 devicetree bindings documentation
Hi Peter,

On Thu, Aug 21, 2014 at 03:03:47PM +0100, Peter Griffin wrote:
> Hi Felipe,
>
> On Thu, 21 Aug 2014, Felipe Balbi wrote:
>
> > > Currently (in the vendor tree) one of the phys lives in
> > > drivers/usb/phy and the other in drivers/phy.
> > > I believe that is because one is only a usb phy and the other is a
> > > multi function phy which can drive PCI-E or USB3.
> >
> > right, but for mainline, we can have both PHYs in drivers/phy only.
>
> Ah ok, I didn't know that, so thanks for that info.
> >
> > > So to make that work, when dwc3/core.c gets the PHYS in
> > > dwc3_core_get_phy() we need to use the different bindings.
> > >
> > > I think we are the only platform using "one of each", but luckily
> > > dwc3_core_get_phy() has been written generically enough that it "just
> > > works" :-).
> >
> > true, but I want to drop support for the legacy drivers/usb/phy layer
> > from dwc3. I'll try to move all PHYs to drivers/phy for v3.18.
>
> Ok, so for the next re-spin I will change this to just use the generic
> phy binding for both usb2 & usb3 phys.
>
> In parallel I will also migrate over the drivers/usb/phy driver to be
> just a generic phy before I attempt to upstream it.

Thank you for understanding :-)

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2014-08-21 16:41    [W:0.041 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site