lkml.org 
[lkml]   [2014]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 11/13] lpfc: Use pci_enable_msix_range() instead of pci_enable_msix()
On 08/18/2014 08:01 AM, Alexander Gordeev wrote:
> As result of deprecation of MSI-X/MSI enablement functions
> pci_enable_msix() and pci_enable_msi_block() all drivers
> using these two interfaces need to be updated to use the
> new pci_enable_msi_range() or pci_enable_msi_exact()
> and pci_enable_msix_range() or pci_enable_msix_exact()
> interfaces.
>
> Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
> Cc: James Smart <james.smart@emulex.com>
> Cc: linux-scsi@vger.kernel.org
> Cc: linux-pci@vger.kernel.org
> ---
> drivers/scsi/lpfc/lpfc_init.c | 39 +++++++++++++++++----------------------
> 1 file changed, 17 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
> index a5769a9..37f2a20 100644
> --- a/drivers/scsi/lpfc/lpfc_init.c
> +++ b/drivers/scsi/lpfc/lpfc_init.c
> @@ -8211,9 +8211,9 @@ lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba)
> * @phba: pointer to lpfc hba data structure.
> *
> * This routine is invoked to enable the MSI-X interrupt vectors to device
> - * with SLI-3 interface specs. The kernel function pci_enable_msix() is
> - * called to enable the MSI-X vectors. Note that pci_enable_msix(), once
> - * invoked, enables either all or nothing, depending on the current
> + * with SLI-3 interface specs. The kernel function pci_enable_msix_exact()
> + * is called to enable the MSI-X vectors. Note that pci_enable_msix_exact(),
> + * once invoked, enables either all or nothing, depending on the current
> * availability of PCI vector resources. The device driver is responsible
> * for calling the individual request_irq() to register each MSI-X vector
> * with a interrupt handler, which is done in this function. Note that
> @@ -8237,8 +8237,8 @@ lpfc_sli_enable_msix(struct lpfc_hba *phba)
> phba->msix_entries[i].entry = i;
>
> /* Configure MSI-X capability structure */
> - rc = pci_enable_msix(phba->pcidev, phba->msix_entries,
> - ARRAY_SIZE(phba->msix_entries));
> + rc = pci_enable_msix_exact(phba->pcidev, phba->msix_entries,
> + LPFC_MSIX_VECTORS);
> if (rc) {
> lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
> "0420 PCI enable MSI-X failed (%d)\n", rc);

Hi Alexander

the code continues with:
goto -> pci_disable_msix(phba->pcidev);
that call to disable_msix is also superfluous I think
shouldn't that be fixed too?
the same is also in lpfc_sli4_enable_msix

Tomas

> @@ -8775,16 +8775,14 @@ out:
> * @phba: pointer to lpfc hba data structure.
> *
> * This routine is invoked to enable the MSI-X interrupt vectors to device
> - * with SLI-4 interface spec. The kernel function pci_enable_msix() is called
> - * to enable the MSI-X vectors. Note that pci_enable_msix(), once invoked,
> - * enables either all or nothing, depending on the current availability of
> - * PCI vector resources. The device driver is responsible for calling the
> - * individual request_irq() to register each MSI-X vector with a interrupt
> - * handler, which is done in this function. Note that later when device is
> - * unloading, the driver should always call free_irq() on all MSI-X vectors
> - * it has done request_irq() on before calling pci_disable_msix(). Failure
> - * to do so results in a BUG_ON() and a device will be left with MSI-X
> - * enabled and leaks its vectors.
> + * with SLI-4 interface spec. The kernel function pci_enable_msix_range()
> + * is called to enable the MSI-X vectors. The device driver is responsible
> + * for calling the individual request_irq() to register each MSI-X vector
> + * with a interrupt handler, which is done in this function. Note that
> + * later when device is unloading, the driver should always call free_irq()
> + * on all MSI-X vectors it has done request_irq() on before calling
> + * pci_disable_msix(). Failure to do so results in a BUG_ON() and a device
> + * will be left with MSI-X enabled and leaks its vectors.
> *
> * Return codes
> * 0 - successful
> @@ -8805,17 +8803,14 @@ lpfc_sli4_enable_msix(struct lpfc_hba *phba)
> phba->sli4_hba.msix_entries[index].entry = index;
> vectors++;
> }
> -enable_msix_vectors:
> - rc = pci_enable_msix(phba->pcidev, phba->sli4_hba.msix_entries,
> - vectors);
> - if (rc > 1) {
> - vectors = rc;
> - goto enable_msix_vectors;
> - } else if (rc) {
> + rc = pci_enable_msix_range(phba->pcidev, phba->sli4_hba.msix_entries,
> + 2, vectors);
> + if (rc < 0) {
> lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
> "0484 PCI enable MSI-X failed (%d)\n", rc);
> goto vec_fail_out;
> }
> + vectors = rc;
>
> /* Log MSI-X vector assignment */
> for (index = 0; index < vectors; index++)



\
 
 \ /
  Last update: 2014-08-21 14:01    [W:0.227 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site