lkml.org 
[lkml]   [2014]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 1/4] of: Add bindings for nvidia,tegra124-soctherm
Date
This adds binding documentation and headers for the Tegra124
SOCTHERM device tree node.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
---
.../devicetree/bindings/thermal/tegra-soctherm.txt | 53 ++++++++++++++++++++++
include/dt-bindings/thermal/tegra124-soctherm.h | 13 ++++++
2 files changed, 66 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/tegra-soctherm.txt
create mode 100644 include/dt-bindings/thermal/tegra124-soctherm.h

diff --git a/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt b/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt
new file mode 100644
index 0000000..ecf3ed7
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt
@@ -0,0 +1,53 @@
+Tegra124 SOCTHERM thermal management system
+
+The SOCTHERM IP block contains thermal sensors, support for polled
+or interrupt-based thermal monitoring, CPU and GPU throttling based
+on temperature trip points, and handling external overcurrent
+notifications. It is also used to manage emergency shutdown in an
+overheating situation.
+
+Required properties :
+- compatible : "nvidia,tegra124-soctherm".
+- reg : Should contain 1 entry:
+ - SOCTHERM register set
+- interrupts : Defines the interrupt used by SOCTHERM
+- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries:
+ - tsensor
+ - soctherm
+- resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+ - soctherm
+- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description
+ of this property. See <dt-bindings/thermal/tegra124-soctherm.h> for a
+ list of valid values when referring to thermal sensors.
+
+
+Example :
+
+ soctherm@0,700e2000 {
+ compatible = "nvidia,tegra124-soctherm";
+ reg = <0x0 0x700e2000 0x0 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
+ <&tegra_car TEGRA124_CLK_SOC_THERM>;
+ clock-names = "tsensor", "soctherm";
+ resets = <&tegra_car 78>;
+ reset-names = "soctherm";
+
+ #thermal-sensor-cells = <1>;
+ };
+
+Example: referring to thermal sensors :
+
+ thermal-zones {
+ cpu {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+ };
+ };
diff --git a/include/dt-bindings/thermal/tegra124-soctherm.h b/include/dt-bindings/thermal/tegra124-soctherm.h
new file mode 100644
index 0000000..85aaf66
--- /dev/null
+++ b/include/dt-bindings/thermal/tegra124-soctherm.h
@@ -0,0 +1,13 @@
+/*
+ * This header provides constants for binding nvidia,tegra124-soctherm.
+ */
+
+#ifndef _DT_BINDINGS_THERMAL_TEGRA124_SOCTHERM_H
+#define _DT_BINDINGS_THERMAL_TEGRA124_SOCTHERM_H
+
+#define TEGRA124_SOCTHERM_SENSOR_CPU 0
+#define TEGRA124_SOCTHERM_SENSOR_MEM 1
+#define TEGRA124_SOCTHERM_SENSOR_GPU 2
+#define TEGRA124_SOCTHERM_SENSOR_PLLX 3
+
+#endif
--
1.8.1.5


\
 
 \ /
  Last update: 2014-08-21 12:41    [W:0.132 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site