lkml.org 
[lkml]   [2014]   [Aug]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v4 2/2] usb: gadget: Add xilinx usb2 device support
From
Hi,

On Tue, Jul 22, 2014 at 3:32 PM, Varka Bhadram <varkabhadram@gmail.com> wrote:
> On 07/22/2014 02:38 PM, Subbaraya Sundeep Bhatta wrote:
>>
>> +#include <linux/delay.h>
>> +#include <linux/device.h>
>> +#include <linux/dma-mapping.h>
>> +#include "gadget_chips.h"
>> +#include <linux/interrupt.h>
>> +#include <linux/io.h>
>> +#include <linux/module.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_device.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/prefetch.h>
>> +#include <linux/usb/ch9.h>
>> +#include <linux/usb/gadget.h>
>> +
>
>
> Normally we will put the includes in alphabetical because it looks good
> and readable.
>
> But we have to include the local headers separately after all the main
> includes...
> #include <linux/delay.h>
> #include <linux/device.h>
> ....
> #include <linux/usb/gadget.h>
>
> #include "gadget_chips.h"
>
> (...)
>
Ok
>
>>
>> + switch (udc->setupseqtx) {
>> + case STATUS_PHASE:
>> + switch (udc->setup.bRequest) {
>> + case USB_REQ_SET_ADDRESS:
>> + /* Set the address of the device.*/
>> + udc->write_fn(udc->base_address,
>> + XUSB_ADDRESS_OFFSET,
>> + udc->setup.wValue);
>
>
> Should match open parenthesis
not necessary, as per coding style spaces should not be used --
Outside of comments, documentation and except in Kconfig, spaces are never
used for indentation.

>
> udc->write_fn(udc->base_address,
> XUSB_ADDRESS_OFFSET,
>
> udc->setup.wValue);
>
>
>> + break;
>> + case USB_REQ_SET_FEATURE:
>> + if (udc->setup.bRequestType ==
>> + USB_RECIP_DEVICE) {
>> + if (udc->setup.wValue ==
>> + USB_DEVICE_TEST_MODE)
>> + udc->write_fn(udc->base_address,
>> +
>> XUSB_TESTMODE_OFFSET,
>> + test_mode);
>
>
> Dto
not necessary
>
>
>> + }
>> + break;
>> + }
>> + req->usb_req.actual = req->usb_req.length;
>> + xudc_done(ep0, req, 0);
>> + break;
>> + case DATA_PHASE:
>> + if (!bytes_to_tx) {
>> + /*
>> + * We're done with data transfer, next
>> + * will be zero length OUT with data toggle of
>> + * 1. Setup data_toggle.
>> + */
>> + epcfgreg = udc->read_fn(udc->base_address +
>> + ep0->offset);
>> + epcfgreg |= XUSB_EP_CFG_DATA_TOGGLE_MASK;
>> + udc->write_fn(udc->base_address, ep0->offset,
>> epcfgreg);
>> + udc->setupseqtx = STATUS_PHASE;
>> + } else {
>> + length = count = min_t(u32, bytes_to_tx,
>> + EP0_MAX_PACKET);
>> + /* Copy the data to be transmitted into the DPRAM.
>> */
>> + ep0rambase = (u8 __force *) (udc->base_address +
>> + (ep0->rambase << 2));
>> +
>> + buffer = req->usb_req.buf + req->usb_req.actual;
>> + req->usb_req.actual = req->usb_req.actual +
>> length;
>> + memcpy((void *)ep0rambase, buffer, length);
>> + }
>> + udc->write_fn(udc->base_address, XUSB_EP_BUF0COUNT_OFFSET,
>> + count);
>> + udc->write_fn(udc->base_address, XUSB_BUFFREADY_OFFSET,
>> 1);
>> + break;
>> + default:
>> + break;
>> + }
>> +}
>> +
>> +/**
>> + * xudc_ctrl_ep_handler - Endpoint 0 interrupt handler.
>> + * @udc: pointer to the udc structure.
>> + * @intrstatus: It's the mask value for the interrupt sources on
>> endpoint 0.
>> + *
>> + * Processes the commands received during enumeration phase.
>> + */
>> +static void xudc_ctrl_ep_handler(struct xusb_udc *udc, u32 intrstatus)
>> +{
>> +
>> + if (intrstatus & XUSB_STATUS_SETUP_PACKET_MASK) {
>> + xudc_handle_setup(udc);
>> + } else {
>> + if (intrstatus & XUSB_STATUS_FIFO_BUFF_RDY_MASK)
>> + xudc_ep0_out(udc);
>> + else if (intrstatus & XUSB_STATUS_FIFO_BUFF_FREE_MASK)
>> + xudc_ep0_in(udc);
>> + }
>> +}
>> +
>> +/**
>> + * xudc_nonctrl_ep_handler - Non control endpoint interrupt handler.
>> + * @udc: pointer to the udc structure.
>> + * @epnum: End point number for which the interrupt is to be processed
>> + * @intrstatus: mask value for interrupt sources of endpoints
>> other
>> + * than endpoint 0.
>> + *
>> + * Processes the buffer completion interrupts.
>> + */
>> +static void xudc_nonctrl_ep_handler(struct xusb_udc *udc, u8 epnum,
>> + u32 intrstatus)
>
>
> Should match open parenthesis:
not necessary
>
>
> static void xudc_nonctrl_ep_handler(struct xusb_udc *udc, u8 epnum,
> u32 intrstatus)
>
>> +{
>> +
>> + struct xusb_req *req;
>> + struct xusb_ep *ep;
>> +
>> + ep = &udc->ep[epnum];
>> + /* Process the End point interrupts.*/
>> + if (intrstatus & (XUSB_STATUS_EP0_BUFF1_COMP_MASK << epnum))
>> + ep->buffer0ready = 0;
>> + if (intrstatus & (XUSB_STATUS_EP0_BUFF2_COMP_MASK << epnum))
>> + ep->buffer1ready = 0;
>> +
>> + if (list_empty(&ep->queue))
>> + return;
>> +
>> + req = list_first_entry(&ep->queue, struct xusb_req, queue);
>> +
>> + if (ep->is_in)
>> + xudc_write_fifo(ep, req);
>> + else
>> + xudc_read_fifo(ep, req);
>> +}
>> +
>
>
> (...)
>
>
>> +
>> + /* buffer for data of get_status request */
>> + buff = kzalloc(2, GFP_KERNEL);
>
>
> define proper macro for '2'. Also we can use devm_kzalloc().
Ok
>
> Also one more thing: if we use kzalloc for allocating the 2 bytes
> no where i found that releasing the buffer on error path.
>
>
>> + if (buff == NULL) {
>> + ret = -ENOMEM;
>> + goto fail;
>> + }
>> + /* Dummy request ready, free this in remove */
>> + udc->req->usb_req.buf = buff;
>> +
>> + /* Set device address to 0.*/
>> + udc->write_fn(udc->base_address, XUSB_ADDRESS_OFFSET, 0);
>> +
>> + ret = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
>> + if (ret)
>> + goto fail;
>
>
> If it fails we have to free the buff. see above..
Yeah will change.
>
>
>> +
>> + udc->dev = &udc->gadget.dev;
>> +
>> + /* Enable the interrupts.*/
>> + ier = XUSB_STATUS_GLOBAL_INTR_MASK | XUSB_STATUS_INTR_EVENT_MASK |
>> + XUSB_STATUS_FIFO_BUFF_RDY_MASK |
>> + XUSB_STATUS_FIFO_BUFF_FREE_MASK |
>> + XUSB_STATUS_SETUP_PACKET_MASK |
>> + XUSB_STATUS_INTR_BUFF_COMP_ALL_MASK;
>> +
>> + udc->write_fn(udc->base_address, XUSB_IER_OFFSET, ier);
>> +
>> + platform_set_drvdata(pdev, udc);
>> +
>> + dev_dbg(&pdev->dev, "%s at 0x%08X mapped to 0x%08X %s\n",
>> + driver_name, (u32)res->start,
>> + (u32 __force)udc->base_address,
>> + udc->dma_enabled ? "with DMA" : "without DMA");
>> +
>> + return 0;
>> +fail:
>> + dev_err(&pdev->dev, "probe failed, %d\n", ret);
>> + return ret;
>> +}
>> +
>> +/**
>> + * xudc_remove - Releases the resources allocated during the
>> initialization.
>> + * @pdev: pointer to the platform device structure.
>> + *
>> + * Return: 0 always
>> + */
>> +static int xudc_remove(struct platform_device *pdev)
>> +{
>> + struct xusb_udc *udc = platform_get_drvdata(pdev);
>> + void *buf = udc->req->usb_req.buf;
>
>
> No need of creating another "void *". We can directly free it. (It is u8 *)
Ofcourse but as per Felipe's comments declared local variables for readability
>
>
>> +
>> + usb_del_gadget_udc(&udc->gadget);
>> +
>> + /* free memory allocated for dummy request buffer */
>> + kfree(buf);
>> + /* free memory allocated for dummy request */
>> + kfree(udc->req);
>> +
>> + return 0;
>> +}
>> +
>> +/* Match table for of_platform binding */
>> +static const struct of_device_id usb_of_match[] = {
>> + { .compatible = "xlnx,usb2-device-4.00.a", },
>> + { /* end of list */ },
>> +};
>> +MODULE_DEVICE_TABLE(of, usb_of_match);
>> +
>> +static struct platform_driver xudc_driver = {
>> + .driver = {
>> + .name = driver_name,
>> + .owner = THIS_MODULE,
>
>
> We can drop the owner field update... It updated automatically
> by module_platform_driver().
Ok
>
>
> Please run checkpatch.pl on this patch. You may get more warnings and
> errors.
Yes ran before sending this out. 0 errors and 0 warnings.

Thanks,
Sundeep.B.S.
>
>
> --
> Regards,
> Varka Bhadram.
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/


\
 
 \ /
  Last update: 2014-08-19 08:21    [W:0.094 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site