lkml.org 
[lkml]   [2014]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v3 01/15] clk: tegra: Add binding for the Tegra124 DFLL clocksource
    Date
    From: Tuomas Tynkkynen <ttynkkynen@nvidia.com>

    The DFLL is the main clocksource for the fast CPU cluster on Tegra124
    and also provides automatic CPU rail voltage scaling as well. The DFLL
    is a separate IP block from the usual Tegra124 clock-and-reset
    controller, so it gets its own node in the device tree.

    Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
    ---
    .../bindings/clock/nvidia,tegra124-dfll.txt | 69 ++++++++++++++++++++++
    1 file changed, 69 insertions(+)
    create mode 100644 Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt

    diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
    new file mode 100644
    index 0000000..54c62ac
    --- /dev/null
    +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
    @@ -0,0 +1,69 @@
    +NVIDIA Tegra124 DFLL FCPU clocksource
    +
    +This binding uses the common clock binding:
    +Documentation/devicetree/bindings/clock/clock-bindings.txt
    +
    +The DFLL IP block on Tegra is a root clocksource designed for clocking
    +the fast CPU cluster. It consists of a free-running voltage controlled
    +oscillator connected to the CPU voltage rail (VDD_CPU), and a closed loop
    +control module that will automatically adjust the VDD_CPU voltage by
    +communicating with an off-chip PMIC either via an I2C bus or via PWM signals.
    +
    +Required properties:
    +- compatible : should be "nvidia,tegra124-dfll-fcpu"
    +- reg : Defines the following set of registers, in the order listed:
    + - registers for the DFLL control logic.
    + - registers for the I2C output logic.
    + - registers for the integrated I2C master controller.
    + - look-up table RAM for voltage register values.
    +- interrupts: Should contain the DFLL block interrupt.
    +- clocks: Must contain an entry for each entry in clock-names.
    + See ../clocks/clock-bindings.txt for details.
    +- clock-names: Must include the following entries:
    + - soc: Clock source for the DFLL control logic.
    + - ref: The closed loop reference clock
    + - i2c: Clock source for the integrated I2C master.
    +- #clock-cells: Must be 0.
    +- clock-output-names: Name of the clock output.
    +- vdd-cpu-supply: Regulator for the CPU voltage rail that the DFLL
    + hardware will start controlling.
    +
    +Required properties for the control loop parameters:
    +- nvidia,sample-rate: Sample rate of the DFLL control loop.
    +- nvidia,droop-ctrl: See the register CL_DVFS_DROOP_CTRL in the TRM.
    +- nvidia,force-mode: See the field DFLL_PARAMS_FORCE_MODE in the TRM.
    +- nvidia,cf: Numeric value, see the field DFLL_PARAMS_CF_PARAM in the TRM.
    +- nvidia,ci: Numeric value, see the field DFLL_PARAMS_CI_PARAM in the TRM.
    +- nvidia,cg: Numeric value, see the field DFLL_PARAMS_CG_PARAM in the TRM.
    +- nvidia,cg-scale: Boolean value, see the field DFLL_PARAMS_CG_SCALE in the TRM.
    +
    +Required properties for I2C mode:
    +- nvidia,i2c-fs-rate: I2C transfer rate, if using FS mode.
    +
    +Example:
    +
    +dfll@0,70110000 {
    + compatible = "nvidia,tegra124-dfll";
    + reg = <0 0x70110000 0 0x100>, /* DFLL control */
    + <0 0x70110000 0 0x100>, /* I2C output control */
    + <0 0x70110100 0 0x100>, /* Integrated I2C controller */
    + <0 0x70110200 0 0x100>; /* Look-up table RAM */
    + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
    + clocks = <&tegra_car TEGRA124_CLK_DFLL_SOC>,
    + <&tegra_car TEGRA124_CLK_DFLL_REF>,
    + <&tegra_car TEGRA124_CLK_I2C5>;
    + clock-names = "soc", "ref", "i2c";
    + #clock-cells = <0>;
    + clock-output-names = "dfllCPU_out";
    + vdd-cpu-supply = <&vdd_cpu>;
    + status = "okay";
    +
    + nvidia,sample-rate = <12500>;
    + nvidia,droop-ctrl = <0x00000f00>;
    + nvidia,force-mode = <1>;
    + nvidia,cf = <10>;
    + nvidia,ci = <0>;
    + nvidia,cg = <2>;
    +
    + nvidia,i2c-fs-rate = <400000>;
    +};
    --
    1.8.1.5


    \
     
     \ /
      Last update: 2014-08-19 06:21    [W:5.231 / U:0.336 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site