Messages in this thread | | | Date | Tue, 19 Aug 2014 10:46:11 +0900 | From | Inha Song <> | Subject | Re: [alsa-devel] [PATCH v3 2/2] mfd: arizona: Update DT binding to support INn_MODE init_data |
| |
Hi, Charles. Thanks for your review.
On Mon, 18 Aug 2014 15:29:45 +0100 Charles Keepax <ckeepax@opensource.wolfsonmicro.com> wrote:
> On Mon, Aug 18, 2014 at 08:00:09PM +0900, Inha Song wrote: > > This patch update DT binding to support INn_MODE init_data. Each > > input signal path can be configurated either as a Analogue or > > Digital using the INn_MODE registers. > > > > Signed-off-by: Inha Song <ideal.song@samsung.com> > > --- > > Documentation/devicetree/bindings/mfd/arizona.txt | 8 ++++++++ > > 1 file changed, 8 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt > > index 5c7e723..0064b21 100644 > > --- a/Documentation/devicetree/bindings/mfd/arizona.txt > > +++ b/Documentation/devicetree/bindings/mfd/arizona.txt > > @@ -42,6 +42,14 @@ Optional properties: > > the chip default will be used. If present exactly five values must > > be specified. > > > > + - wlf,inmode : A list of INn_MODE register values, where n is the number > > + of input signals. Each input signal path can be configurated either as a > > + Analogue or Digital using the INn_MODE registers. If absent, INn_MODE > > I would replace the second sentence here with something like > "Valid values are 0 (Differential), 1 (Single-ended) and 2 (Digital > Microphone)." >
OK, I will fix it like this:
- wlf,inmode : A list of INn_MODE register values, where n is the number of input signals. Valid values are 0 (Differential), 1 (Single-ended) and 2 (Digital Microphone). If absent, INn_MODE registers.........
Best regards, Inha Song.
> Thanks, > Charles > > > + registers set to 0 by default. If present, values must be specified less > > + than or equal to the number of input singals. If values less than the > > + number of input signals, elements that has not been specifed are set to 0 > > + by default. > > + > > - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if > > they are being externally supplied. As covered in > > Documentation/devicetree/bindings/regulator/regulator.txt > > -- > > 2.0.0.390.gcb682f8 > >
| |