lkml.org 
[lkml]   [2014]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] Input: misc: introduce palmas-pwrbutton
Date
Many palmas family of PMICs have support for interrupt based power
button. This allows the device to notify the processor of external
push button events over the shared palmas interrupt. However, this
event is generated only during a "press" operation. Software is
supposed to poll(sigh!) for detecting a release event.

The PMIC also supports ability to power off independent of the
software decisions when the button is pressed for a long duration if
the PMIC is appropriately configured on the platform.

Even though the function is similar to twl4030_pwrbutton, it is
substantially different in operation to belong to a new driver of it's
own.

Based on original work done by Girish S Ghongdemath <girishsg@ti.com>

Signed-off-by: Nishanth Menon <nm@ti.com>
---
drivers/input/misc/Kconfig | 10 ++
drivers/input/misc/Makefile | 1 +
drivers/input/misc/palmas-pwrbutton.c | 314 +++++++++++++++++++++++++++++++++
3 files changed, 325 insertions(+)
create mode 100644 drivers/input/misc/palmas-pwrbutton.c

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 2ff4425..0224dcf 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -451,6 +451,16 @@ config HP_SDC_RTC
Say Y here if you want to support the built-in real time clock
of the HP SDC controller.

+config INPUT_PALMAS_PWRBUTTON
+ tristate "Palmas Power button Driver"
+ depends on MFD_PALMAS
+ help
+ Say Y here if you want to enable power key reporting via the
+ Palmas family of PMICs.
+
+ To compile this driver as a module, choose M here. The module will
+ be called palmas_pwrbutton.
+
config INPUT_PCF50633_PMU
tristate "PCF50633 PMU events"
depends on MFD_PCF50633
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 4955ad3..e3d5efb 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_INPUT_MAX8997_HAPTIC) += max8997_haptic.o
obj-$(CONFIG_INPUT_MC13783_PWRBUTTON) += mc13783-pwrbutton.o
obj-$(CONFIG_INPUT_MMA8450) += mma8450.o
obj-$(CONFIG_INPUT_MPU3050) += mpu3050.o
+obj-$(CONFIG_INPUT_PALMAS_PWRBUTTON) += palmas-pwrbutton.o
obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o
obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o
obj-$(CONFIG_INPUT_PCF8574) += pcf8574_keypad.o
diff --git a/drivers/input/misc/palmas-pwrbutton.c b/drivers/input/misc/palmas-pwrbutton.c
new file mode 100644
index 0000000..35f3d68
--- /dev/null
+++ b/drivers/input/misc/palmas-pwrbutton.c
@@ -0,0 +1,314 @@
+/*
+ * Texas Instruments' Palmas Power Button Input Driver
+ *
+ * Copyright (C) 2012-2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Girish S Ghongdemath
+ * Nishanth Menon
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/palmas.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+
+#define PALMAS_LPK_TIME_MASK 0x0c
+#define PALMAS_PWR_KEY_PRESS 0x01
+#define PALMAS_PWR_KEY_Q_TIME_MS 20
+
+/**
+ * struct palmas_pwron - Palmas power on data
+ * @palmas: pointer to palmas device
+ * @input_dev: pointer to input device
+ * @irq: irq that we are hooked on to
+ * @input_work: work for detecting release of key
+ * @current_state: key current state
+ * @key_recheck_ms: duration for recheck of key (in milli-seconds)
+ */
+struct palmas_pwron {
+ struct palmas *palmas;
+ struct input_dev *input_dev;
+ int irq;
+ struct delayed_work input_work;
+ int current_state;
+ u32 key_recheck_ms;
+};
+
+/**
+ * struct palmas_pwron_config - configuration of palmas power on
+ * @long_press_time_val: value for long press h/w shutdown event
+ */
+struct palmas_pwron_config {
+ u8 long_press_time_val;
+};
+
+/**
+ * palmas_get_pwr_state() - read button state
+ * @pwron: pointer to pwron struct
+ */
+static int palmas_get_pwr_state(struct palmas_pwron *pwron)
+{
+ struct input_dev *input_dev = pwron->input_dev;
+ struct device *dev = input_dev->dev.parent;
+ unsigned int reg = 0;
+ int ret;
+
+ ret = palmas_read(pwron->palmas, PALMAS_INTERRUPT_BASE,
+ PALMAS_INT1_LINE_STATE, &reg);
+ if (ret) {
+ dev_err(dev, "%s:Cannot read palmas PWRON status(%d)\n",
+ __func__, ret);
+ return ret;
+ }
+
+ /* PWRON line state is BIT(1) of the register */
+ return reg & BIT(1) ? 0 : PALMAS_PWR_KEY_PRESS;
+}
+
+/**
+ * palmas_power_button_work() - Detects the button release event
+ * @work: work item to detect button release
+ */
+static void palmas_power_button_work(struct work_struct *work)
+{
+ struct palmas_pwron *pwron = container_of((struct delayed_work *)work,
+ struct palmas_pwron,
+ input_work);
+ struct input_dev *input_dev = pwron->input_dev;
+ int next_state;
+
+ next_state = palmas_get_pwr_state(pwron);
+ if (next_state < 0)
+ return;
+
+ /*
+ * If the state did not change then schedule a work item to check the
+ * status of the power button line
+ */
+ if (next_state == pwron->current_state) {
+ schedule_delayed_work(&pwron->input_work,
+ msecs_to_jiffies(pwron->key_recheck_ms));
+ return;
+ }
+
+ pwron->current_state = next_state;
+ input_report_key(input_dev, KEY_POWER, pwron->current_state);
+ input_sync(input_dev);
+}
+
+/**
+ * pwron_irq() - button press isr
+ * @irq: irq
+ * @palmas_pwron: pwron struct
+ */
+static irqreturn_t pwron_irq(int irq, void *palmas_pwron)
+{
+ struct palmas_pwron *pwron = palmas_pwron;
+ struct input_dev *input_dev = pwron->input_dev;
+
+ cancel_delayed_work_sync(&pwron->input_work);
+
+ pwron->current_state = PALMAS_PWR_KEY_PRESS;
+
+ input_report_key(input_dev, KEY_POWER, pwron->current_state);
+ pm_wakeup_event(input_dev->dev.parent, 0);
+ input_sync(input_dev);
+
+ schedule_delayed_work(&pwron->input_work, 0);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * palmas_pwron_params_ofinit() - device tree parameter parser
+ * @dev: palmas button device
+ * @config: configuration params that this fills up
+ */
+static int palmas_pwron_params_ofinit(struct device *dev,
+ struct palmas_pwron_config *config)
+{
+ struct device_node *np;
+ u32 val;
+ int i;
+ u8 lpk_times[] = { 6, 8, 10, 12 };
+
+ /* Legacy boot? */
+ if (!of_have_populated_dt())
+ return 0;
+
+ np = of_node_get(dev->of_node);
+ /* Mixed boot? */
+ if (!np)
+ return 0;
+
+ val = 0;
+ of_property_read_u32(np, "ti,palmas-long-press-seconds", &val);
+ config->long_press_time_val = ARRAY_SIZE(lpk_times) - 1;
+ for (i = 0; i < ARRAY_SIZE(lpk_times); i++) {
+ if (val <= lpk_times[i]) {
+ config->long_press_time_val = i;
+ break;
+ }
+ }
+ dev_info(dev, "h/w controlled shutdown duration=%d seconds\n",
+ lpk_times[config->long_press_time_val]);
+
+ of_node_put(np);
+
+ return 0;
+}
+
+/**
+ * palmas_pwron_probe() - probe
+ * @pdev: platform device for the button
+ */
+static int palmas_pwron_probe(struct platform_device *pdev)
+{
+ struct palmas *palmas = dev_get_drvdata(pdev->dev.parent);
+ struct device *dev = &pdev->dev;
+ struct input_dev *input_dev;
+ struct palmas_pwron *pwron;
+ int irq, ret;
+ struct palmas_pwron_config config = { 0 };
+
+ ret = palmas_pwron_params_ofinit(dev, &config);
+ if (ret)
+ return ret;
+
+ pwron = devm_kzalloc(dev, sizeof(*pwron), GFP_KERNEL);
+ if (!pwron)
+ return -ENOMEM;
+
+ input_dev = devm_input_allocate_device(dev);
+ if (!input_dev) {
+ dev_err(dev, "Can't allocate power button\n");
+ return -ENOMEM;
+ }
+
+ /* Setup default hardware shutdown option (long key press) */
+ ret = palmas_update_bits(palmas, PALMAS_PMU_CONTROL_BASE,
+ PALMAS_LONG_PRESS_KEY,
+ PALMAS_LPK_TIME_MASK,
+ config.long_press_time_val);
+ if (ret < 0) {
+ dev_err(dev, "LONG_PRESS_KEY_UPDATE failed!\n");
+ return ret;
+ }
+
+ input_dev->evbit[0] = BIT_MASK(EV_KEY);
+ input_dev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
+ input_dev->name = "palmas_pwron";
+ input_dev->phys = "palmas_pwron/input0";
+ input_dev->dev.parent = dev;
+
+ pwron->palmas = palmas;
+ pwron->input_dev = input_dev;
+
+ INIT_DELAYED_WORK(&pwron->input_work, palmas_power_button_work);
+
+ irq = platform_get_irq(pdev, 0);
+
+ device_init_wakeup(dev, 1);
+
+ ret = devm_request_threaded_irq(dev, irq, NULL, pwron_irq,
+ IRQF_TRIGGER_HIGH |
+ IRQF_TRIGGER_LOW,
+ dev_name(dev),
+ pwron);
+ if (ret < 0) {
+ dev_err(dev, "Can't get IRQ for pwron: %d\n", ret);
+ return ret;
+ }
+
+ enable_irq_wake(irq);
+
+ ret = input_register_device(input_dev);
+ if (ret) {
+ dev_dbg(dev, "Can't register power button: %d\n", ret);
+ goto out_irq_wake;
+ }
+ pwron->irq = irq;
+
+ pwron->key_recheck_ms = PALMAS_PWR_KEY_Q_TIME_MS;
+
+ platform_set_drvdata(pdev, pwron);
+
+ return 0;
+
+out_irq_wake:
+ disable_irq_wake(irq);
+
+ return ret;
+}
+
+static int palmas_pwron_remove(struct platform_device *pdev)
+{
+ struct palmas_pwron *pwron = platform_get_drvdata(pdev);
+
+ disable_irq_wake(pwron->irq);
+ input_unregister_device(pwron->input_dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+/**
+ * palmas_pwron_suspend() - suspend handler
+ * @dev: power button device
+ *
+ * Cancel all pending work items for the power button
+ */
+static int palmas_pwron_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct palmas_pwron *pwron = platform_get_drvdata(pdev);
+
+ cancel_delayed_work_sync(&pwron->input_work);
+
+ return 0;
+}
+
+static UNIVERSAL_DEV_PM_OPS(palmas_pwron_pm, palmas_pwron_suspend, NULL, NULL);
+
+#else
+static UNIVERSAL_DEV_PM_OPS(palmas_pwron_pm, NULL, NULL, NULL);
+#endif
+
+#ifdef CONFIG_OF
+static struct of_device_id of_palmas_pwr_match[] = {
+ {.compatible = "ti,palmas-pwrbutton"},
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, of_palmas_pwr_match);
+#endif
+
+static struct platform_driver palmas_pwron_driver = {
+ .probe = palmas_pwron_probe,
+ .remove = palmas_pwron_remove,
+ .driver = {
+ .name = "palmas_pwrbutton",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(of_palmas_pwr_match),
+ .pm = &palmas_pwron_pm,
+ },
+};
+module_platform_driver(palmas_pwron_driver);
+
+MODULE_ALIAS("platform:palmas-pwrbutton");
+MODULE_DESCRIPTION("Palmas Power Button");
+MODULE_LICENSE("GPL V2");
+MODULE_AUTHOR("Texas Instruments Inc.");
--
1.7.9.5


\
 
 \ /
  Last update: 2014-08-18 22:21    [W:0.249 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site