lkml.org 
[lkml]   [2014]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RESEND v2 3/7] usb: phy: mxs: Add VF610 USB PHY support
Date
This adds support for the USB PHY in Vybrid VF610. We assume that
the disconnection without VBUS is also needed for Vybrid.

Tests showed, without MXS_PHY_NEED_IP_FIX, enumeration of devices
behind a USB Hub fails with errors:

[ 215.163507] usb usb1-port1: cannot reset (err = -32)
[ 215.170498] usb usb1-port1: cannot reset (err = -32)
[ 215.185120] usb usb1-port1: cannot reset (err = -32)
[ 215.191345] usb usb1-port1: cannot reset (err = -32)
[ 215.202487] usb usb1-port1: cannot reset (err = -32)
[ 215.207718] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
[ 215.219317] usb usb1-port1: unable to enumerate USB device

Hence we also enable the MXS_PHY_NEED_IP_FIX flag.

Acked-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
Documentation/devicetree/bindings/usb/mxs-phy.txt | 1 +
drivers/usb/phy/phy-mxs-usb.c | 6 ++++++
2 files changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt
index cef181a..fe3eed8 100644
--- a/Documentation/devicetree/bindings/usb/mxs-phy.txt
+++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt
@@ -5,6 +5,7 @@ Required properties:
* "fsl,imx23-usbphy" for imx23 and imx28
* "fsl,imx6q-usbphy" for imx6dq and imx6dl
* "fsl,imx6sl-usbphy" for imx6sl
+ * "fsl,vf610-usbphy" for Vybrid vf610
"fsl,imx23-usbphy" is still a fallback for other strings
- reg: Should contain registers location and length
- interrupts: Should contain phy interrupt
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index c42bdf0..8c2f23b 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -125,10 +125,16 @@ static const struct mxs_phy_data imx6sl_phy_data = {
MXS_PHY_NEED_IP_FIX,
};

+static const struct mxs_phy_data vf610_phy_data = {
+ .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
+ MXS_PHY_NEED_IP_FIX,
+};
+
static const struct of_device_id mxs_phy_dt_ids[] = {
{ .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
{ .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, },
{ .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
+ { .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
--
2.0.4


\
 
 \ /
  Last update: 2014-08-18 22:21    [W:0.261 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site