lkml.org 
[lkml]   [2014]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/5] Thermal reset support in PMC
Date
Hi,

this series adds support for hardware-triggered thermal reset to the PMC
driver. Namely, it adds device tree properties for specifying the I2C
command to be sent when thermtrip is triggered. It is to be noted
that thermtrip won't be ever triggered without a soctherm driver to
calibrate the sensors.

Git repo at
git://github.com/cyndis/linux.git pmc-thermtrip-v2

Testing script at https://gist.github.com/cyndis/66126c9c176b5f94a76f.
If your fan stops it is working.

Mikko Perttunen (5):
of: Add descriptions of thermtrip properties to Tegra PMC bindings
of: Add nvidia,controller-id property to Tegra I2C bindings
ARM: tegra124: Add I2C controller ids to device tree
ARM: tegra: Add PMC thermtrip programming to Jetson TK1 device tree
ARM: tegra: Add thermal reset (thermtrip) support to PMC

.../bindings/arm/tegra/nvidia,tegra20-pmc.txt | 21 ++
.../devicetree/bindings/i2c/nvidia,tegra20-i2c.txt | 5 +
arch/arm/boot/dts/tegra124-jetson-tk1.dts | 6 +
arch/arm/boot/dts/tegra124.dtsi | 6 +
drivers/soc/tegra/pmc.c | 379 ++++++++++++++-------
5 files changed, 285 insertions(+), 132 deletions(-)

--
1.8.1.5



\
 
 \ /
  Last update: 2014-08-13 15:01    [W:0.031 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site