lkml.org 
[lkml]   [2014]   [Aug]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RESEND PATCH 2/2] ARM: dts: Add tps65090 FET constraints on Peach Pit and Pi
From
Javier,

On Mon, Aug 11, 2014 at 4:38 AM, Javier Martinez Canillas
<javier.martinez@collabora.co.uk> wrote:
> Both Exynos5420 Peach Pit and Exynos5800 Peach Pi boards
> have a tps65090 PMU that has a number of switches (FETs)
> that are just on/off devices but they do have a current
> limit and the output voltage of the switch is ramped up
> within a controlled slope.
>
> After the switch is turned on, a safety timer is started
> and before this timer times out the output voltage must
> have reached the input voltage. Otherwise the switch is
> turned off expecting an overload condition.
>
> So using the maximum output voltage slew rate and the timer
> minimum and maximum timeouts, a voltage constraints can be
> expressed as bounded limits for the timeout. That is what
> is used in the board schematics and should be in the DT too.

I don't understand this, but if you and Mark are happy with it...

...I'm also not 100% certain what the above description has to do with
this change, but I'll admit to having only skimmed some of the earlier
conversations.


> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
> ---
> arch/arm/boot/dts/exynos5420-peach-pit.dts | 14 ++++++++++++++
> arch/arm/boot/dts/exynos5800-peach-pi.dts | 14 ++++++++++++++
> 2 files changed, 28 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> index d8710c1..eefafe6 100644
> --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
> +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
> @@ -386,27 +386,41 @@
> };
> tps65090_fet1: fet1 {
> regulator-name = "vcd_led";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <1700000>;

This is almost certainly wrong. Your max is smaller than your min.
Perhaps you want an extra 0.

> };
> tps65090_fet2: fet2 {
> regulator-name = "video_mid";
> + regulator-min-microvolt = <4500000>;
> + regulator-max-microvolt = <5500000>;
> regulator-always-on;
> };
> tps65090_fet3: fet3 {
> regulator-name = "wwan_r";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <5500000>;
> regulator-always-on;
> };
> tps65090_fet4: fet4 {
> regulator-name = "sdcard";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <5500000>;
> regulator-always-on;
> };
> tps65090_fet5: fet5 {
> regulator-name = "camout";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <5500000>;
> };
> tps65090_fet6: fet6 {
> regulator-name = "lcd_vdd";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <5500000>;
> };
> tps65090_fet7: fet7 {
> regulator-name = "video_mid_1a";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <5500000>;
> regulator-always-on;
> };
> tps65090_ldo1: ldo1 {
> diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> index 07b29b7..5c38bc0 100644
> --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
> +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> @@ -384,27 +384,41 @@
> };
> tps65090_fet1: fet1 {
> regulator-name = "vcd_led";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <1700000>;

Here, too.

> };
> tps65090_fet2: fet2 {
> regulator-name = "video_mid";
> + regulator-min-microvolt = <4500000>;
> + regulator-max-microvolt = <5500000>;
> regulator-always-on;
> };
> tps65090_fet3: fet3 {
> regulator-name = "wwan_r";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <5500000>;
> regulator-always-on;
> };
> tps65090_fet4: fet4 {
> regulator-name = "sdcard";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <5500000>;
> regulator-always-on;
> };
> tps65090_fet5: fet5 {
> regulator-name = "camout";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <5500000>;
> };
> tps65090_fet6: fet6 {
> regulator-name = "lcd_vdd";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <5500000>;
> };
> tps65090_fet7: fet7 {
> regulator-name = "video_mid_1a";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <5500000>;
> regulator-always-on;
> };
> tps65090_ldo1: ldo1 {

Other than 1.7V vs. 17V, this matches what I see in the tps65090
specifications. Technically I think that this should also be applied
to other tps65090 users in mainline since it's a property shared among
every user of tps65090. That means exynos5250-snow and
tegra114-dalmore. I'd be tempted to say that it belongs in source
code or in a dts fragment as well.

-Doug


\
 
 \ /
  Last update: 2014-08-11 18:41    [W:0.071 / U:2.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site