lkml.org 
[lkml]   [2014]   [Aug]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: Oops: 17 SMP ARM (v3.16-rc2)
Date
Russell and Fabio,

> I'd be interested to hear whether removing the
>
> interrupts-extended = ...
>
> property from your board's DT file, thereby causing you to revert back to the
> default I list above, also fixes the instability you are seeing.

We have tried to remove the board specific interrupts-extended field and the
MX6QDL_PAD_GPIO_6__ENET_IRQ entry. Sadly this did not seem to improve
the stalls. Our interrupts look like this now:

150: 15519 0 0 0 GIC 150 2188000.ethernet
151: 0 0 0 0 GIC 151 2188000.ethernet

Our device tree might still be slightly incorrect. We have noticed that our
RGMII_INT is connected to GPIO 19 (P5) which might be nonstandard (we are
a bit surprised that this works at all). We are not quite sure how to configure
this properly.

Best regards,
Mattis Lorentzon
***************************************************************
Consider the environment before printing this message.

To read Autoliv's Information and Confidentiality Notice, follow this link:
http://www.autoliv.com/disclaimer.html
***************************************************************



\
 
 \ /
  Last update: 2014-08-11 15:41    [W:0.165 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site