lkml.org 
[lkml]   [2014]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 3/4 V3] irqchip: gic: Add supports for ARM GICv2m MSI(-X)
Date
On Fri, Aug 01 2014 at  4:42:26 pm BST, Suravee Suthikulanit <suravee.suthikulpanit@amd.com> wrote:
> On 7/30/2014 9:57 AM, Marc Zyngier wrote:
>> On Thu, Jul 10 2014 at 12:05:03 am BST, "suravee.suthikulpanit@amd.com" <suravee.suthikulpanit@amd.com> wrote:
>>
>> Hi Suravee,
>>
>>> From: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
>>>
> >> ......
> >>
>>> - first region is the GIC distributor register base and size. The 2nd region is
>>> - the GIC cpu interface register base and size.
>>> +- reg : Specifies base physical address(s) and size of the GIC register frames.
>>> +
>>> + Region | Description
>>> + Index |
>>> + -------------------------------------------------------------------
>>> + 0 | GIC distributor register base and size
>>> + 1 | GIC cpu interface register base and size
>>> + 2 | VGIC interface control register base and size (Optional)
>>> + 3 | VGIC CPU interface register base and size (Optional)
>>> + 4 | GICv2m MSI interface register base and size (Optional)
>>
>> Given that the v2m block is somehow bolted on the side of a standard
>> GICv2, I'd rather see it as a subnode of the main GIC.
>>
>> Then you could directly call into the v2m layer to initialize it,
>> instead of the odd "reverse probing" you're using here...
>
> [Suravee] IIUC, you don't think we should introduce the "gic-400-v2m"
> compatible ID. Instead, you want to see something like:
>
> gic @ 0x00f00000 {
> .....
> v2m {
> msi-controller;
> reg = < .... >; /* v2m reg frame */
> }
> }
>
> If so, I can change this.

Yes, something like that indeed.

>
>
>>> +
>>> +static int __init
>>> +gicv2m_msi_init(struct device_node *node, struct v2m_data *v2m)
>>> +{
>>> + unsigned int val;
>>> +
>>> + if (of_address_to_resource(node, GIC_OF_MSIV2M_RANGE_INDEX,
>>> + &v2m->res)) {
>>> + pr_err("GICv2m: Failed locate GICv2m MSI register frame\n");
>>> + return -EINVAL;
>>> + }
>>> +
>>> + v2m->base = of_iomap(node, GIC_OF_MSIV2M_RANGE_INDEX);
>>> + if (!v2m->base) {
>>> + pr_err("GICv2m: Failed to map GIC MSI registers\n");
>>> + return -EINVAL;
>>> + }
>>> +
>>> + val = readl_relaxed(v2m->base + V2M_MSI_TYPER);
>>> + if (!val) {
>>> + pr_warn("GICv2m: Failed to read V2M_MSI_TYPER register\n");
>>> + return -EINVAL;
>>> + }
>>> +
>>> + v2m->spi_start = (val >> V2M_MSI_TYPER_BASE_SHIFT) &
>>> + V2M_MSI_TYPER_BASE_MASK;
>>> + v2m->nr_spis = val & V2M_MSI_TYPER_NUM_MASK;
>>> + if ((v2m->spi_start < V2M_MIN_SPI) || (v2m->nr_spis >= V2M_MAX_SPI)) {
>>> + pr_err("GICv2m: Invalid MSI_TYPER (%#x)\n", val);
>>> + return -EINVAL;
>>> + }
>>> +
>>> + v2m->bm = kzalloc(sizeof(long) * BITS_TO_LONGS(v2m->nr_spis),
>>> + GFP_KERNEL);
>>> + if (!v2m->bm) {
>>> + pr_err("GICv2m: Failed to allocate MSI bitmap\n");
>>> + return -ENOMEM;
>>> + }
>>> +
>>> + spin_lock_init(&v2m->msi_cnt_lock);
>>> +
>>> + pr_info("GICv2m: SPI range [%d:%d]\n",
>>> + v2m->spi_start, (v2m->spi_start + v2m->nr_spis));
>>> +
>>> + return 0;
>>> +}
>>
>> This function is assuming that you will only see one single MSI frame
>> here. Is there any chance that there would be more than one in a system?
>>
>
> [Suravee] If I would imagine such SOC, where there are multiple MSI
> frames (hence multiple msi-controllers), can we currently support this
> with the current msichip interface? Currently, each PCI RC connects to
> an "interrupt-parrent", which is also an MSI controller. We would need
> to have a way for PCI RC to specify which of the msichips within an
> interrupt-controller it wants to use.

Not necessarly multiple MSI controllers. As far as I can see, a v2m MSI
frame describes a range of SPIs, and I can perfectly imagine a system
where someone would have a number of these, each capable of generating a
number of SPIs. It becomes interesting when you have non-contiguous SPI
ranges... ;-)

> Currently, I am not aware if there is a GIC w/ multiple MSI frames.
> Could you check if there is such product for ARM GICs?

I can, but it is unlikely I'll be able to find about what people outside
of ARM are doing. They usually only get in touch when they've screwed
something up.. ;-)

Anyway, maybe we just don't need to address this at this point in
time. Adding a comment to that effect would probably be enough, and give
a hint to anyone building such a configuration.

Thanks,

M.
--
Jazz is not dead. It just smells funny.


\
 
 \ /
  Last update: 2014-08-01 18:41    [W:0.089 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site