lkml.org 
[lkml]   [2014]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v8 4/4] drivers: net: Add APM X-Gene SoC ethernet driver support.
From
On Wed, Jun 25, 2014 at 4:04 PM, Russell King - ARM Linux
<linux@arm.linux.org.uk> wrote:
> On Tue, Jun 24, 2014 at 10:29:48PM -0600, Dann Frazier wrote:
>> On Fri, Jun 20, 2014 at 5:18 PM, Iyappan Subramanian
>> <isubramanian@apm.com> wrote:
>> > + ring->desc_addr = dma_zalloc_coherent(dev, size, &ring->dma,
>> > + GFP_KERNEL);
>>
>> Iyappan,
>> When testing this driver on a 3.16-rc2 base, I'm finding that
>> desc_addr gets assigned to NULL here, which results in an oops later
>> on (see below).
>
> Note that on failure here...
>
>> > + if (!ring->desc_addr)
>> > + goto err;
>
> we jump to 'err'.
>
>> > +err:
>> > + dma_free_coherent(dev, size, ring->desc_addr, ring->dma);
>
> which then tries to call dma_free_coherent on a NULL pointer, and
> possibly undefined ring->dma value. That's not a nice thing to do,
> and will probably lead to problems. I know that none of the ARM
> flavours of this function will handle this gracefully, and neither
> does x86's version either. So this is very probably illegal.

I will fix this.

>
>> > +static int xgene_enet_create_desc_rings(struct net_device *ndev)
>> > +{
>> > + struct xgene_enet_pdata *pdata = netdev_priv(ndev);
>> > + struct device *dev = &pdata->pdev->dev;
>> > + struct xgene_enet_desc_ring *rx_ring, *tx_ring, *cp_ring;
>> > + struct xgene_enet_desc_ring *buf_pool = NULL;
>> > + u8 cpu_bufnum = 0, eth_bufnum = 0;
>> > + u8 bp_bufnum = 0x20;
>> > + u16 ring_id, ring_num = 0;
>> > + int ret;
>> > +
>> > + /* allocate rx descriptor ring */
>> > + ring_id = xgene_enet_get_ring_id(RING_OWNER_CPU, cpu_bufnum++);
>> > + rx_ring = xgene_enet_create_desc_ring(ndev, ring_num++,
>> > + RING_CFGSIZE_16KB, ring_id);
>> > + if (IS_ERR_OR_NULL(rx_ring)) {
>> > + ret = PTR_ERR(rx_ring);
>> > + goto err;
>> > + }
>>
>> Here we test for IS_ERR_OR_NULL. In the oops I'm hitting, rx_ring is
>> NULL here - but PTR_ERR() apparently returns 0 in that case. So this
>> function ends up returning no error.
>
> Yes, IS_ERR_OR_NULL is evil for this very reason and should be avoided
> where possible. There were discussions a while back about removing it,
> or at least deprecating it because it causes more bugs (exactly of this
> type) than it solves.

Thanks for pointing it out. I will redesign IS_ERR_OR_NULL usage.

>
> --
> FTTC broadband for 0.8mile line: now at 9.7Mbps down 460kbps up... slowly
> improving, and getting towards what was expected from it.


\
 
 \ /
  Last update: 2014-07-10 01:21    [W:0.094 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site