lkml.org 
[lkml]   [2014]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net v2] r8169: disable L23
Date
For RTL8411, RTL8111G, RTL8402, RTL8105, and RTL8106, disable the feature
of entering the L2/L3 link state of the PCIe. When the nic starts the process
of entering the L2/L3 link state and the PCI reset occurs before the work
is finished, the work would be queued and continue after the next the PCI
reset occurs. This causes the device stays in L2/L3 link state, and the system
couldn't find the device.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
drivers/net/ethernet/realtek/r8169.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)

diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index be425ad..38144ee 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -538,6 +538,7 @@ enum rtl_register_content {
MagicPacket = (1 << 5), /* Wake up when receives a Magic Packet */
LinkUp = (1 << 4), /* Wake up when the cable connection is re-established */
Jumbo_En0 = (1 << 2), /* 8168 only. Reserved in the 8168b */
+ Rdy_to_L23 = (1 << 1), /* L23 Enable */
Beacon_en = (1 << 0), /* 8168 only. Reserved in the 8168b */

/* Config4 register */
@@ -4897,6 +4898,21 @@ static void rtl_enable_clock_request(struct pci_dev *pdev)
PCI_EXP_LNKCTL_CLKREQ_EN);
}

+static void rtl_l23_enable(struct rtl8169_private *tp, bool enable)
+{
+ void __iomem *ioaddr = tp->mmio_addr;
+ u8 data;
+
+ data = RTL_R8(Config3);
+
+ if (enable)
+ data |= Rdy_to_L23;
+ else
+ data &= ~Rdy_to_L23;
+
+ RTL_W8(Config3, data);
+}
+
#define R8168_CPCMD_QUIRK_MASK (\
EnableBist | \
Mac_dbgo_oe | \
@@ -5246,6 +5262,7 @@ static void rtl_hw_start_8411(struct rtl8169_private *tp)
};

rtl_hw_start_8168f(tp);
+ rtl_l23_enable(tp, false);

rtl_ephy_init(tp, e_info_8168f_1, ARRAY_SIZE(e_info_8168f_1));

@@ -5284,6 +5301,8 @@ static void rtl_hw_start_8168g_1(struct rtl8169_private *tp)

rtl_w1w0_eri(tp, 0x2fc, ERIAR_MASK_0001, 0x01, 0x06, ERIAR_EXGMAC);
rtl_w1w0_eri(tp, 0x1b0, ERIAR_MASK_0011, 0x0000, 0x1000, ERIAR_EXGMAC);
+
+ rtl_l23_enable(tp, false);
}

static void rtl_hw_start_8168g_2(struct rtl8169_private *tp)
@@ -5536,6 +5555,8 @@ static void rtl_hw_start_8105e_1(struct rtl8169_private *tp)
RTL_W8(DLLPR, RTL_R8(DLLPR) | PFM_EN);

rtl_ephy_init(tp, e_info_8105e_1, ARRAY_SIZE(e_info_8105e_1));
+
+ rtl_l23_enable(tp, false);
}

static void rtl_hw_start_8105e_2(struct rtl8169_private *tp)
@@ -5571,6 +5592,8 @@ static void rtl_hw_start_8402(struct rtl8169_private *tp)
rtl_eri_write(tp, 0xc0, ERIAR_MASK_0011, 0x0000, ERIAR_EXGMAC);
rtl_eri_write(tp, 0xb8, ERIAR_MASK_0011, 0x0000, ERIAR_EXGMAC);
rtl_w1w0_eri(tp, 0x0d4, ERIAR_MASK_0011, 0x0e00, 0xff00, ERIAR_EXGMAC);
+
+ rtl_l23_enable(tp, false);
}

static void rtl_hw_start_8106(struct rtl8169_private *tp)
@@ -5583,6 +5606,8 @@ static void rtl_hw_start_8106(struct rtl8169_private *tp)
RTL_W32(MISC, (RTL_R32(MISC) | DISABLE_LAN_EN) & ~EARLY_TALLY_EN);
RTL_W8(MCU, RTL_R8(MCU) | EN_NDP | EN_OOB_RESET);
RTL_W8(DLLPR, RTL_R8(DLLPR) & ~PFM_EN);
+
+ rtl_l23_enable(tp, false);
}

static void rtl_hw_start_8101(struct net_device *dev)
--
1.9.3


\
 
 \ /
  Last update: 2014-07-09 09:21    [W:0.074 / U:3.628 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site